The falcon mode was never used on this board, there is also no plan to use it. So drop this dead code.
Signed-off-by: Hannes Schmelzer oe5hpm@oevsv.at ---
board/BuR/brppt1/board.c | 16 ---------------- include/configs/brppt1.h | 14 -------------- 2 files changed, 30 deletions(-)
diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c index ff2a3a2..f970f98 100644 --- a/board/BuR/brppt1/board.c +++ b/board/BuR/brppt1/board.c @@ -72,22 +72,6 @@ static const struct ctrl_ioregs ddr3_ioregs = { .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, };
-#ifdef CONFIG_SPL_OS_BOOT -/* - * called from spl_nand.c - * return 0 for loading linux, return 1 for loading u-boot - */ -int spl_start_uboot(void) -{ - if (0 == gpio_get_value(REPSWITCH)) { - mdelay(1000); - printf("SPL: entering u-boot instead kernel image.\n"); - return 1; - } - return 0; -} -#endif /* CONFIG_SPL_OS_BOOT */ - #define OSC (V_OSCK/1000000) static const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 6a210b7..32bb83c 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -44,20 +44,6 @@ #define CONFIG_MTD_DEVICE /* Required for mtdparts */ #endif /* CONFIG_SPI_BOOT, ... */
-#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 - -/* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -/* NAND */ -#ifdef CONFIG_NAND -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 -#endif /* CONFIG_NAND */ -#endif /* CONFIG_SPL_OS_BOOT */ - #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS