Sort the ATA commands in include/libata.h by number. Add a few more comments.
Signed-off-by: Heinrich Schuchardt xypron.glpk@gmx.de --- include/libata.h | 84 ++++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/include/libata.h b/include/libata.h index 25296ac66d..fee2e78f01 100644 --- a/include/libata.h +++ b/include/libata.h @@ -133,49 +133,49 @@ enum { ATA_REG_IRQ = ATA_REG_NSECT,
/* ATA device commands */ - ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */ - ATA_CMD_CHK_POWER = 0xE5, /* check power mode */ - ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */ - ATA_CMD_IDLE = 0xE3, /* place in idle power mode */ - ATA_CMD_EDD = 0x90, /* execute device diagnostic */ - ATA_CMD_FLUSH = 0xE7, - ATA_CMD_FLUSH_EXT = 0xEA, - ATA_CMD_ID_ATA = 0xEC, - ATA_CMD_ID_ATAPI = 0xA1, - ATA_CMD_READ = 0xC8, - ATA_CMD_READ_EXT = 0x25, - ATA_CMD_WRITE = 0xCA, - ATA_CMD_WRITE_EXT = 0x35, - ATA_CMD_WRITE_FUA_EXT = 0x3D, - ATA_CMD_FPDMA_READ = 0x60, - ATA_CMD_FPDMA_WRITE = 0x61, - ATA_CMD_PIO_READ = 0x20, - ATA_CMD_PIO_READ_EXT = 0x24, - ATA_CMD_PIO_WRITE = 0x30, - ATA_CMD_PIO_WRITE_EXT = 0x34, - ATA_CMD_READ_MULTI = 0xC4, - ATA_CMD_READ_MULTI_EXT = 0x29, - ATA_CMD_WRITE_MULTI = 0xC5, - ATA_CMD_WRITE_MULTI_EXT = 0x39, - ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE, - ATA_CMD_SET_FEATURES = 0xEF, - ATA_CMD_SET_MULTI = 0xC6, - ATA_CMD_PACKET = 0xA0, - ATA_CMD_VERIFY = 0x40, - ATA_CMD_VERIFY_EXT = 0x42, - ATA_CMD_STANDBYNOW1 = 0xE0, - ATA_CMD_IDLEIMMEDIATE = 0xE1, - ATA_CMD_SLEEP = 0xE6, - ATA_CMD_INIT_DEV_PARAMS = 0x91, - ATA_CMD_READ_NATIVE_MAX = 0xF8, + ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */ + ATA_CMD_PIO_READ = 0x20, /* Read sectors with retry */ + ATA_CMD_PIO_READ_EXT = 0x24, + ATA_CMD_READ_EXT = 0x25, ATA_CMD_READ_NATIVE_MAX_EXT = 0x27, - ATA_CMD_SET_MAX = 0xF9, - ATA_CMD_SET_MAX_EXT = 0x37, - ATA_CMD_READ_LOG_EXT = 0x2f, - ATA_CMD_PMP_READ = 0xE4, - ATA_CMD_PMP_WRITE = 0xE8, - ATA_CMD_CONF_OVERLAY = 0xB1, - ATA_CMD_SEC_FREEZE_LOCK = 0xF5, + ATA_CMD_READ_MULTI_EXT = 0x29, + ATA_CMD_READ_LOG_EXT = 0x2f, + ATA_CMD_PIO_WRITE = 0x30, /* write sectors with retry */ + ATA_CMD_PIO_WRITE_EXT = 0x34, + ATA_CMD_WRITE_EXT = 0x35, + ATA_CMD_SET_MAX_EXT = 0x37, + ATA_CMD_WRITE_MULTI_EXT = 0x39, + ATA_CMD_WRITE_FUA_EXT = 0x3D, + ATA_CMD_VERIFY = 0x40, /* read verify sectors with retry */ + ATA_CMD_VERIFY_EXT = 0x42, + ATA_CMD_FPDMA_READ = 0x60, + ATA_CMD_FPDMA_WRITE = 0x61, + ATA_CMD_EDD = 0x90, /* execute device diagnostic */ + ATA_CMD_INIT_DEV_PARAMS = 0x91, /* initialize device parameters */ + ATA_CMD_PACKET = 0xA0, /* ATAPI packet */ + ATA_CMD_ID_ATAPI = 0xA1, /* ATAPI identify device */ + ATA_CMD_CONF_OVERLAY = 0xB1, + ATA_CMD_READ_MULTI = 0xC4, /* read multiple */ + ATA_CMD_WRITE_MULTI = 0xC5, /* write multiple */ + ATA_CMD_SET_MULTI = 0xC6, /* set multiple mode */ + ATA_CMD_READ = 0xC8, /* read DMA with retry */ + ATA_CMD_WRITE = 0xCA, /* write DMA with retry */ + ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE, + ATA_CMD_STANDBYNOW1 = 0xE0, /* standby immediate */ + ATA_CMD_IDLEIMMEDIATE = 0xE1, /* idle immediate */ + ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */ + ATA_CMD_IDLE = 0xE3, /* place in idle power mode */ + ATA_CMD_PMP_READ = 0xE4, /* read buffer */ + ATA_CMD_CHK_POWER = 0xE5, /* check power mode */ + ATA_CMD_SLEEP = 0xE6, /* sleep */ + ATA_CMD_FLUSH = 0xE7, + ATA_CMD_PMP_WRITE = 0xE8, /* write buffer */ + ATA_CMD_FLUSH_EXT = 0xEA, + ATA_CMD_ID_ATA = 0xEC, /* identify device */ + ATA_CMD_SET_FEATURES = 0xEF, /* set features */ + ATA_CMD_SEC_FREEZE_LOCK = 0xF5, /* security freeze */ + ATA_CMD_READ_NATIVE_MAX = 0xF8, + ATA_CMD_SET_MAX = 0xF9,
/* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, -- 2.25.0