Re: [U-Boot] [PATCH v4 1/2] arm:goni: Update configuration for goni target

On 10/14/2013 06:56 PM, Mateusz Zalega wrote:

From: Arkadiusz Wlodarczyk a.wlodarczyk@samsung.com

Configuration file for GONI has been updated to support FAT file system, new mmc partitioning scheme and read linux kernel from eMMC instead of OneNAND.

Signed-off-by: Arkadiusz Wlodarczyk a.wlodarczyk@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com Signed-off-by: Mateusz Zalega m.zalega@samsung.com Tested-by: Arkadiusz Wlodarczyk a.wlodarczyk@samsung.com Tested-by: Mateusz Zalega m.zalega@gmail.com Cc: Minkyu Kang mk7.kang@samsung.com

---

Changes since v3:

• added CMD_EXT4
• made it conform with current, recently accepted USB patches

---

include/configs/s5p_goni.h | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index c303244..fd441c8 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -94,7 +94,7 @@

#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT

-#define CONFIG_BOOTCOMMAND "run ubifsboot" +#define CONFIG_BOOTCOMMAND "run mmcboot"

#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"

@@ -124,7 +124,7 @@ "onenand erase 0x01560000 0x1eaa0000;" \ "onenand write 0x32000000 0x1260000 0x8C0000\0" \ "bootk=" \

• "onenand read 0x30007FC0 0xc00000 0x600000;" \
  

• "run loaduimage;" \
  

  "bootm 0x30007FC0\0" \ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \

@@ -143,16 +143,21 @@ "set bootargs " CONFIG_RAMDISK_BOOT \ " initrd=0x33000000,8M ramdisk=8192\0" \ "mmcboot=" \

• "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
  

• "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
  

• "rootfstype=${rootfstype}" \
  

  CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "verify=n\0" \

• "rootfstype=cramfs\0" \

• "rootfstype=ext4\0" \ "console=" CONFIG_DEFAULT_CONSOLE \ "mtdparts=" MTDPARTS_DEFAULT \ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
• "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
• "mmcdev=0\0" \
• "mmcbootpart=2\0" \
• "mmcrootpart=5\0" \ "mmcblk=/dev/mmcblk1p1\0" \

"mmcblk" - is it used anywhere?

"bootblock=9\0" \ "ubiblock=8\0" \ @@ -198,6 +203,11 @@

#define CONFIG_DOS_PARTITION 1

+/* FAT */ +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT4 +#define CONFIG_FAT_WRITE

There is also separate write config for ext4.

#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)

#define CONFIG_SYS_CACHELINE_SIZE 64