The LX2160ARDB board has support for DM_ETH probed devices, which means that we do not need to manually create an MDIO controller, register it, create PHYs on it etc.
In order to cleanup the board file a bit, just remove this code entirely.
Signed-off-by: Ioana Ciornei ioana.ciornei@nxp.com --- board/freescale/lx2160a/eth_lx2160ardb.c | 144 ----------------------- 1 file changed, 144 deletions(-)
diff --git a/board/freescale/lx2160a/eth_lx2160ardb.c b/board/freescale/lx2160a/eth_lx2160ardb.c index 8a9c60f46cd5..69f3e817915b 100644 --- a/board/freescale/lx2160a/eth_lx2160ardb.c +++ b/board/freescale/lx2160a/eth_lx2160ardb.c @@ -5,158 +5,14 @@ */
#include <common.h> -#include <command.h> -#include <fdt_support.h> -#include <net.h> #include <netdev.h> -#include <malloc.h> -#include <fsl_mdio.h> -#include <miiphy.h> -#include <phy.h> -#include <fm_eth.h> -#include <asm/global_data.h> -#include <asm/io.h> #include <exports.h> -#include <asm/arch/fsl_serdes.h> #include <fsl-mc/fsl_mc.h> -#include <fsl-mc/ldpaa_wriop.h> -#include "lx2160a.h"
DECLARE_GLOBAL_DATA_PTR;
-static bool get_inphi_phy_id(struct mii_dev *bus, int addr, int devad) -{ - int phy_reg; - u32 phy_id; - - phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); - phy_id = (phy_reg & 0xffff) << 16; - - phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); - phy_id |= (phy_reg & 0xffff); - - if (phy_id == PHY_UID_IN112525_S03) - return true; - else - return false; -} - int board_eth_init(struct bd_info *bis) { -#if defined(CONFIG_FSL_MC_ENET) - struct memac_mdio_info mdio_info; - struct memac_mdio_controller *reg; - int i, interface; - struct mii_dev *dev; - struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR); - u32 srds_s1; - - srds_s1 = in_le32(&gur->rcwsr[28]) & - FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK; - srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; - - reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1; - mdio_info.regs = reg; - mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; - - /* Register the EMI 1 */ - fm_memac_mdio_init(bis, &mdio_info); - - reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2; - mdio_info.regs = reg; - mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; - - /* Register the EMI 2 */ - fm_memac_mdio_init(bis, &mdio_info); - - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); - switch (srds_s1) { - case 19: - wriop_set_phy_address(WRIOP1_DPMAC2, 0, - CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC3, 0, - AQR107_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC4, 0, - AQR107_PHY_ADDR2); - if (get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) { - wriop_set_phy_address(WRIOP1_DPMAC5, 0, - INPHI_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC6, 0, - INPHI_PHY_ADDR1); - } - wriop_set_phy_address(WRIOP1_DPMAC17, 0, - RGMII_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC18, 0, - RGMII_PHY_ADDR2); - break; - - case 18: - wriop_set_phy_address(WRIOP1_DPMAC7, 0, - CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC8, 0, - CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC9, 0, - CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC10, 0, - CORTINA_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC3, 0, - AQR107_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC4, 0, - AQR107_PHY_ADDR2); - if (get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) { - wriop_set_phy_address(WRIOP1_DPMAC5, 0, - INPHI_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC6, 0, - INPHI_PHY_ADDR1); - } - wriop_set_phy_address(WRIOP1_DPMAC17, 0, - RGMII_PHY_ADDR1); - wriop_set_phy_address(WRIOP1_DPMAC18, 0, - RGMII_PHY_ADDR2); - break; - - default: - printf("SerDes1 protocol 0x%x is not supported on LX2160ARDB\n", - srds_s1); - goto next; - } - - for (i = WRIOP1_DPMAC2; i <= WRIOP1_DPMAC10; i++) { - interface = wriop_get_enet_if(i); - switch (interface) { - case PHY_INTERFACE_MODE_XGMII: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); - wriop_set_mdio(i, dev); - break; - case PHY_INTERFACE_MODE_25G_AUI: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); - wriop_set_mdio(i, dev); - break; - case PHY_INTERFACE_MODE_XLAUI: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); - wriop_set_mdio(i, dev); - break; - default: - break; - } - } - for (i = WRIOP1_DPMAC17; i <= WRIOP1_DPMAC18; i++) { - interface = wriop_get_enet_if(i); - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); - wriop_set_mdio(i, dev); - break; - default: - break; - } - } - -next: - cpu_eth_init(bis); -#endif /* CONFIG_FSL_MC_ENET */ - #ifdef CONFIG_PHY_AQUANTIA /* * Export functions to be used by AQ firmware