The original H616 devices released about three years ago were typically paired with an X-Powers AXP305 PMIC. Newer devices uses the smaller AXP313, and there seem to be far more systems with this PMIC around now.
Remove the default AXP305 selection for the H616 SoC from the Kconfig, and move the PMIC selection into the board defconfig files instead.
Signed-off-by: Andre Przywara andre.przywara@arm.com Reviewed-by: Jaehoon Chung jh80.chung@samsung.com --- configs/orangepi_zero2_defconfig | 1 + configs/x96_mate_defconfig | 1 + drivers/power/Kconfig | 1 - 3 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index 50009e823cb..98aed846f1f 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_I2C_SPEED=400000 CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHY_REALTEK=y CONFIG_SUN8I_EMAC=y +CONFIG_AXP305_POWER=y CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig index 318951e19c2..e805e0952b3 100644 --- a/configs/x96_mate_defconfig +++ b/configs/x96_mate_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 +CONFIG_AXP305_POWER=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 2395720c99c..33b8bc1214d 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -56,7 +56,6 @@ choice depends on ARCH_SUNXI default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 - default AXP305_POWER if MACH_SUN50I_H616 default AXP818_POWER if MACH_SUN8I_A83T default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S