Dear Niklaus Giger,
In message 1253719369-26565-3-git-send-email-niklaus.giger@netstal.com you wrote:
Various cleanups for our boards:
- vxworks_preboot to get clock input right for HCU4/MCU25
- reboot if SW-install-input is activated
- clear vxWorks exception msg
- HCU5: various HW-registers updated
- HCU5: 2nd Ethernet = SMII, Ethernet PLL Config. = recommended values
- HCU5: PATCH HAB: WRITE PIPELINING OFF
- HCU5: no pci_init if board has no PCI
- MCU25: corrected address to read slot id
- Lindent -pcs for hcu5.c
Please don't mix white space cleanup / formatting changes with changes of real content.
+void show_activity(int arg) +{
- hcu_led_set(arg);
- if( sys_install_requested() !=installRequested )
- {
printf("%s: installRequested 0x%x 0x%x\n", __FUNCTION__,installRequested,sys_install_requested());do_reset ();- }
Incorrect brace style. Please fix globally.
...
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 0546cd7..d52cf99 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -36,9 +36,11 @@ #include <asm/mmu.h> #include <asm/cache.h> #include <ppc440.h> +#include <post.h>
void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); +void zero_all_memory(unsigned long start_address, unsigned long num_bytes);
#define ECC_RAM 0x03267F0B #define NO_ECC_RAM 0x00267F0B @@ -48,6 +50,11 @@ void dcbz_area(u32 start_address, u32 num_bytes); #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on DDR2 */
+/* PPC440EPx Erratum CHIP_11: End of memory range area restricted access.
- -> no access to last 256 Bytes!!!
- */
Incorrect multiline comment style. Please fix globally.
Best regards,
Wolfgang Denk