From: Patrice Chotard patrice.chotard@st.com
This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device.
Driver code has been mainly extracted from kernel drivers/reset/sti/reset-stih407.c
Signed-off-by: Patrice Chotard patrice.chotard@st.com --- arch/arm/Kconfig | 1 + drivers/reset/Kconfig | 8 ++ drivers/reset/Makefile | 1 + drivers/reset/sti-reset.c | 320 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 330 insertions(+) create mode 100644 drivers/reset/sti-reset.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 20434dc..af5157e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1100,6 +1100,7 @@ config ARCH_STI select DM_SERIAL select BLK select DM_MMC + select DM_RESET help Support for STMicroelectronics STiH407/10 SoC family. This SoC is used on Linaro 96Board STiH410-B2260 diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index c42b0bc..fa77ee4 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -20,6 +20,14 @@ config SANDBOX_RESET simply accepts requests to reset various HW modules without actually doing anything beyond a little error checking.
+config STI_RESET + bool "Enable the STi reset" + depends on ARCH_STI + help + Support for reset controllers on STMicroelectronics STiH407 family SoCs. + Say Y if you want to control reset signals provided by system config + block. + config TEGRA_CAR_RESET bool "Enable Tegra CAR-based reset driver" depends on TEGRA_CAR diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 5c4305c..2b96396 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DM_RESET) += reset-uclass.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o +obj-$(CONFIG_STI_RESET) += sti-reset.o obj-$(CONFIG_TEGRA_CAR_RESET) += tegra-car-reset.o obj-$(CONFIG_TEGRA186_RESET) += tegra186-reset.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o diff --git a/drivers/reset/sti-reset.c b/drivers/reset/sti-reset.c new file mode 100644 index 0000000..0c32a3d --- /dev/null +++ b/drivers/reset/sti-reset.c @@ -0,0 +1,320 @@ +/* + * Copyright (c) 2017 + * Patrice Chotard patrice.chotard@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <wait_bit.h> +#include <dm.h> +#include <reset-uclass.h> +#include <regmap.h> +#include <syscon.h> +#include <dt-bindings/reset/stih407-resets.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct sti_reset { + const struct syscfg_reset_controller_data *data; +}; + +/** + * Reset channel description for a system configuration register based + * reset controller. + * + * @compatible: Compatible string of the syscon containing this + * channel's control and ack (status) bits. + * @reset_offset: Reset register offset in sysconf bank. + * @reset_bit: Bit number in reset register. + * @ack_offset: Ack reset register offset in syscon bank. + * @ack_bit: Bit number in Ack reset register. + */ + +struct syscfg_reset_channel_data { + const char *compatible; + int reset_offset; + int reset_bit; + int ack_offset; + int ack_bit; +}; + +/** + * Description of a system configuration register based reset controller. + * + * @wait_for_ack: The controller will wait for reset assert and de-assert to + * be "ack'd" in a channel's ack field. + * @active_low: Are the resets in this controller active low, i.e. clearing + * the reset bit puts the hardware into reset. + * @nr_channels: The number of reset channels in this controller. + * @channels: An array of reset channel descriptions. + */ +struct syscfg_reset_controller_data { + bool wait_for_ack; + bool active_low; + int nr_channels; + const struct syscfg_reset_channel_data *channels; +}; + +/* STiH407 Peripheral powerdown definitions. */ +static const char stih407_core[] = "st,stih407-core-syscfg"; +static const char stih407_sbc_reg[] = "st,stih407-sbc-reg-syscfg"; +static const char stih407_lpm[] = "st,stih407-lpm-syscfg"; + +#define _SYSCFG_RST_CH(_c, _rr, _rb, _ar, _ab) \ + { .compatible = _c, \ + .reset_offset = _rr, \ + .reset_bit = _rb, \ + .ack_offset = _ar, \ + .ack_bit = _ab, } + +#define _SYSCFG_RST_CH_NO_ACK(_c, _rr, _rb) \ + { .compatible = _c, \ + .reset_offset = _rr, \ + .reset_bit = _rb, } + +#define STIH407_SRST_CORE(_reg, _bit) \ + _SYSCFG_RST_CH_NO_ACK(stih407_core, _reg, _bit) + +#define STIH407_SRST_SBC(_reg, _bit) \ + _SYSCFG_RST_CH_NO_ACK(stih407_sbc_reg, _reg, _bit) + +#define STIH407_SRST_LPM(_reg, _bit) \ + _SYSCFG_RST_CH_NO_ACK(stih407_lpm, _reg, _bit) + +#define STIH407_PDN_0(_bit) \ + _SYSCFG_RST_CH(stih407_core, SYSCFG_5000, _bit, SYSSTAT_5500, _bit) +#define STIH407_PDN_1(_bit) \ + _SYSCFG_RST_CH(stih407_core, SYSCFG_5001, _bit, SYSSTAT_5501, _bit) +#define STIH407_PDN_ETH(_bit, _stat) \ + _SYSCFG_RST_CH(stih407_sbc_reg, SYSCFG_4032, _bit, SYSSTAT_4520, _stat) + +/* Powerdown requests control 0 */ +#define SYSCFG_5000 0x0 +#define SYSSTAT_5500 0x7d0 +/* Powerdown requests control 1 (High Speed Links) */ +#define SYSCFG_5001 0x4 +#define SYSSTAT_5501 0x7d4 + +/* Ethernet powerdown/status/reset */ +#define SYSCFG_4032 0x80 +#define SYSSTAT_4520 0x820 +#define SYSCFG_4002 0x8 + +static const struct syscfg_reset_channel_data stih407_powerdowns[] = { + [STIH407_EMISS_POWERDOWN] = STIH407_PDN_0(1), + [STIH407_NAND_POWERDOWN] = STIH407_PDN_0(0), + [STIH407_USB3_POWERDOWN] = STIH407_PDN_1(6), + [STIH407_USB2_PORT1_POWERDOWN] = STIH407_PDN_1(5), + [STIH407_USB2_PORT0_POWERDOWN] = STIH407_PDN_1(4), + [STIH407_PCIE1_POWERDOWN] = STIH407_PDN_1(3), + [STIH407_PCIE0_POWERDOWN] = STIH407_PDN_1(2), + [STIH407_SATA1_POWERDOWN] = STIH407_PDN_1(1), + [STIH407_SATA0_POWERDOWN] = STIH407_PDN_1(0), + [STIH407_ETH1_POWERDOWN] = STIH407_PDN_ETH(0, 2), +}; + +/* Reset Generator control 0/1 */ +#define SYSCFG_5128 0x200 +#define SYSCFG_5131 0x20c +#define SYSCFG_5132 0x210 + +#define LPM_SYSCFG_1 0x4 /* Softreset IRB & SBC UART */ + +static const struct syscfg_reset_channel_data stih407_softresets[] = { + [STIH407_ETH1_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 4), + [STIH407_MMC1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 3), + [STIH407_USB2_PORT0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 28), + [STIH407_USB2_PORT1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 29), + [STIH407_PICOPHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 30), + [STIH407_IRB_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 6), + [STIH407_PCIE0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 6), + [STIH407_PCIE1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 15), + [STIH407_SATA0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 7), + [STIH407_SATA1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 16), + [STIH407_MIPHY0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 4), + [STIH407_MIPHY1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 13), + [STIH407_MIPHY2_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 22), + [STIH407_SATA0_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 5), + [STIH407_SATA1_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 14), + [STIH407_DELTA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 3), + [STIH407_BLITTER_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 10), + [STIH407_HDTVOUT_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 11), + [STIH407_HDQVDP_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 12), + [STIH407_VDP_AUX_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 14), + [STIH407_COMPO_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 15), + [STIH407_HDMI_TX_PHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 21), + [STIH407_JPEG_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 23), + [STIH407_VP8_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 24), + [STIH407_GPU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 30), + [STIH407_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 0), + [STIH407_ERAM_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 1), + [STIH407_LPM_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 2), + [STIH407_KEYSCAN_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 8), + [STIH407_ST231_AUD_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 26), + [STIH407_ST231_DMU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 27), + [STIH407_ST231_GP0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 28), + [STIH407_ST231_GP1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5128, 2), +}; + +/* PicoPHY reset/control */ +#define SYSCFG_5061 0x0f4 + +static const struct syscfg_reset_channel_data stih407_picophyresets[] = { + [STIH407_PICOPHY0_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 5), + [STIH407_PICOPHY1_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 6), + [STIH407_PICOPHY2_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 7), +}; + +static const struct +syscfg_reset_controller_data stih407_powerdown_controller = { + .wait_for_ack = true, + .nr_channels = ARRAY_SIZE(stih407_powerdowns), + .channels = stih407_powerdowns, +}; + +static const struct +syscfg_reset_controller_data stih407_softreset_controller = { + .wait_for_ack = false, + .active_low = true, + .nr_channels = ARRAY_SIZE(stih407_softresets), + .channels = stih407_softresets, +}; + +static const struct +syscfg_reset_controller_data stih407_picophyreset_controller = { + .wait_for_ack = false, + .nr_channels = ARRAY_SIZE(stih407_picophyresets), + .channels = stih407_picophyresets, +}; + +phys_addr_t sti_reset_get_regmap(const char *compatible) +{ + struct udevice *syscon; + struct regmap *regmap; + int node, ret; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + compatible); + if (node < 0) { + error("unable to find %s node\n", compatible); + return node; + } + + ret = uclass_get_device_by_of_offset(UCLASS_SYSCON, node, &syscon); + if (ret) { + error("%s: uclass_get_device_by_of_offset failed: %d\n", + __func__, ret); + return ret; + } + + regmap = syscon_get_regmap(syscon); + if (!regmap) { + error("unable to get regmap for %s\n", syscon->name); + return -ENODEV; + } + + return regmap->base; +} + +static int sti_reset_program_hw(struct reset_ctl *reset_ctl, int assert) +{ + struct udevice *dev = reset_ctl->dev; + struct syscfg_reset_controller_data *reset_desc = + (struct syscfg_reset_controller_data *)(dev->driver_data); + struct syscfg_reset_channel_data ch; + phys_addr_t base; + u32 ctrl_val = reset_desc->active_low ? !assert : !!assert; + void __iomem *reg; + + /* check if reset id is inside available range */ + if (reset_ctl->id >= reset_desc->nr_channels) + return -EINVAL; + + /* get reset sysconf register base address */ + base = sti_reset_get_regmap(reset_desc->channels[reset_ctl->id].compatible); + + ch = reset_desc->channels[reset_ctl->id]; + reg = (void __iomem *)base + ch.reset_offset; + + if (ctrl_val) + generic_set_bit(ch.reset_bit, reg); + else + generic_clear_bit(ch.reset_bit, reg); + + if (!reset_desc->wait_for_ack) + return 0; + + reg = (void __iomem *)base + ch.ack_offset; + if (wait_for_bit(__func__, reg, BIT(ch.ack_bit), ctrl_val, + 1000, false)) { + error("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n", + reset_ctl, reset_ctl->dev, reset_ctl->id); + + return -ETIMEDOUT; + } + + return 0; +} + +static int sti_reset_request(struct reset_ctl *reset_ctl) +{ + return 0; +} + +static int sti_reset_free(struct reset_ctl *reset_ctl) +{ + return 0; +} + +static int sti_reset_assert(struct reset_ctl *reset_ctl) +{ + return sti_reset_program_hw(reset_ctl, true); +} + +static int sti_reset_deassert(struct reset_ctl *reset_ctl) +{ + return sti_reset_program_hw(reset_ctl, false); +} + +struct reset_ops sti_reset_ops = { + .request = sti_reset_request, + .free = sti_reset_free, + .rst_assert = sti_reset_assert, + .rst_deassert = sti_reset_deassert, +}; + +static int sti_reset_probe(struct udevice *dev) +{ + struct sti_reset *priv = dev_get_priv(dev); + + priv->data = (void *)dev_get_driver_data(dev); + + return 0; +} + +static const struct udevice_id sti_reset_ids[] = { + { + .compatible = "st,stih407-picophyreset", + .data = (ulong)&stih407_picophyreset_controller, + }, + { + .compatible = "st,stih407-powerdown", + .data = (ulong)&stih407_powerdown_controller, + }, + { + .compatible = "st,stih407-softreset", + .data = (ulong)&stih407_softreset_controller, + }, + { } +}; + +U_BOOT_DRIVER(sti_reset) = { + .name = "sti_reset", + .id = UCLASS_RESET, + .of_match = sti_reset_ids, + .probe = sti_reset_probe, + .priv_auto_alloc_size = sizeof(struct sti_reset), + .ops = &sti_reset_ops, +};