From: Fabio Estevam fabio.estevam@freescale.com
mx6 solo-lite is another member of the mx6 series.
For more information about mx6 solo-lite, please visit: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6SL&n...
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v2: - None Changes since v1: - None
arch/arm/cpu/armv7/mx6/clock.c | 38 ++++++++++++++++- arch/arm/include/asm/arch-mx6/crm_regs.h | 5 +++ arch/arm/include/asm/arch-mx6/imx-regs.h | 63 +++++++++++++++++++++++++++- arch/arm/include/asm/arch-mx6/mx6-pins.h | 4 ++ arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 25 +++++++++++ 5 files changed, 132 insertions(+), 3 deletions(-) create mode 100644 arch/arm/include/asm/arch-mx6/mx6sl_pins.h
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index a50db70..8cba4fd 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -186,12 +186,16 @@ static u32 get_ipg_per_clk(void) static u32 get_uart_clk(void) { u32 reg, uart_podf; - + u32 freq = PLL3_80M; reg = __raw_readl(&imx_ccm->cscdr1); +#ifdef CONFIG_MX6SL + if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) + freq = MXC_HCLK; +#endif reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK; uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET;
- return PLL3_80M / (uart_podf + 1); + return freq / (uart_podf + 1); }
static u32 get_cspi_clk(void) @@ -252,6 +256,35 @@ static u32 get_emi_slow_clk(void) return root_freq / (emi_slow_pof + 1); }
+#ifdef CONFIG_MX6SL +static u32 get_mmdc_ch0_clk(void) +{ + u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + u32 freq, podf; + + podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \ + >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; + + switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) { + case 0: + freq = decode_pll(PLL_BUS, MXC_HCLK); + break; + case 1: + freq = PLL2_PFD2_FREQ; + break; + case 2: + freq = PLL2_PFD0_FREQ; + break; + case 3: + freq = PLL2_PFD2_DIV_FREQ; + } + + return freq / (podf + 1); + +} +#else static u32 get_mmdc_ch0_clk(void) { u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); @@ -260,6 +293,7 @@ static u32 get_mmdc_ch0_clk(void)
return get_periph_clk() / (mmdc_ch0_podf + 1); } +#endif
static u32 get_usdhc_clk(u32 port) { diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 7676457..b1ed62f 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -244,7 +244,12 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6 #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#ifdef CONFIG_MX6SL +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F +#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) +#else #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F +#endif #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
/* Define the bits in register CS1CDR */ diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index eaa7439..2d8fe69 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -25,6 +25,13 @@
#define ROMCP_ARB_BASE_ADDR 0x00000000 #define ROMCP_ARB_END_ADDR 0x000FFFFF + +#ifdef CONFIG_MX6SL +#define GPU_2D_ARB_BASE_ADDR 0x02200000 +#define GPU_2D_ARB_END_ADDR 0x02203FFF +#define OPENVG_ARB_BASE_ADDR 0x02204000 +#define OPENVG_ARB_END_ADDR 0x02207FFF +#else #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00103FFF #define APBH_DMA_ARB_BASE_ADDR 0x00110000 @@ -37,9 +44,14 @@ #define GPU_2D_ARB_END_ADDR 0x00137FFF #define DTCP_ARB_BASE_ADDR 0x00138000 #define DTCP_ARB_END_ADDR 0x0013BFFF - +#endif /* CONFIG_MX6SL */ /* GPV - PL301 configuration ports */ +#ifdef CONFIG_MX6SL +#define GPV2_BASE_ADDR 0x00D00000 +#else #define GPV2_BASE_ADDR 0x00200000 +#endif + #define GPV3_BASE_ADDR 0x00300000 #define GPV4_BASE_ADDR 0x00800000 #define IRAM_BASE_ADDR 0x00900000 @@ -70,10 +82,17 @@ #define WEIM_ARB_BASE_ADDR 0x08000000 #define WEIM_ARB_END_ADDR 0x0FFFFFFF
+#ifdef CONFIG_MX6SL +#define MMDC0_ARB_BASE_ADDR 0x80000000 +#define MMDC0_ARB_END_ADDR 0xFFFFFFFF +#define MMDC1_ARB_BASE_ADDR 0xC0000000 +#define MMDC1_ARB_END_ADDR 0xFFFFFFFF +#else #define MMDC0_ARB_BASE_ADDR 0x10000000 #define MMDC0_ARB_END_ADDR 0x7FFFFFFF #define MMDC1_ARB_BASE_ADDR 0x80000000 #define MMDC1_ARB_END_ADDR 0xFFFFFFFF +#endif
#define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR #define IPU_SOC_OFFSET 0x00200000 @@ -89,6 +108,16 @@ #define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000) #define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000) #define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000) +#ifdef CONFIG_MX6SL +#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000) +#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) +#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000) +#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) +#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) +#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) +#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) +#else #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) #define UART1_BASE (ATZ1_BASE_ADDR + 0x20000) #define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) @@ -96,6 +125,8 @@ #define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) #define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) +#endif + #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) #define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000) #define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000) @@ -128,18 +159,35 @@ #define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000) #define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000) #define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000) +#ifdef CONFIG_MX6SL +#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) +#define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) +#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#else #define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#endif
#define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000) #define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000) #define CAAM_BASE_ADDR (ATZ2_BASE_ADDR) #define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000) +#ifdef CONFIG_MX6SL +#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) +#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) +#else #define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) #define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) +#endif + #define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000) +#ifdef CONFIG_MX6SL +#define MSHC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) +#else #define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) +#endif + #define USDHC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x10000) #define USDHC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x14000) #define USDHC3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x18000) @@ -149,7 +197,12 @@ #define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000) #define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000) #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) +#ifdef CONFIG_MX6SL +#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) +#else #define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) +#endif + #define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000) #define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000) #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) @@ -364,12 +417,20 @@ struct cspi_regs { #define MXC_CSPICON_POL 4 #define MXC_CSPICON_PHA 0 #define MXC_CSPICON_SSPOL 12 +#ifdef CONFIG_MX6SL +#define MXC_SPI_BASE_ADDRESSES \ + ECSPI1_BASE_ADDR, \ + ECSPI2_BASE_ADDR, \ + ECSPI3_BASE_ADDR, \ + ECSPI4_BASE_ADDR +#else #define MXC_SPI_BASE_ADDRESSES \ ECSPI1_BASE_ADDR, \ ECSPI2_BASE_ADDR, \ ECSPI3_BASE_ADDR, \ ECSPI4_BASE_ADDR, \ ECSPI5_BASE_ADDR +#endif
struct iim_regs { u32 ctrl; diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h index 63f4856..ce865a6 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -24,7 +24,11 @@ #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #include "mx6dl_pins.h" #else +#if defined(CONFIG_MX6SL) +#include "mx6sl_pins.h" +#else #error "Please select cpu" +#endif /* CONFIG_MX6SL */ #endif /* CONFIG_MX6DL or CONFIG_MX6S */ #endif /* CONFIG_MX6Q */
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h new file mode 100644 index 0000000..bfe4f00 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_ARCH_MX6_MX6SL_PINS_H__ +#define __ASM_ARCH_MX6_MX6SL_PINS_H__ + +#include <asm/imx-common/iomux-v3.h> + +enum { + MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0), + MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0), + MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0), +}; +#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */