Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this family: pcb110, pcb111 and pcb112.
Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com --- arch/mips/dts/jr2_pcb110.dts | 67 ++++++++ arch/mips/dts/jr2_pcb111.dts | 352 +++++++++++++++++++++++++++++++++++++++ arch/mips/dts/mscc,jr2.dtsi | 106 ++++++++++++ arch/mips/dts/serval2_pcb112.dts | 39 +++++ 4 files changed, 564 insertions(+)
diff --git a/arch/mips/dts/jr2_pcb110.dts b/arch/mips/dts/jr2_pcb110.dts index ddc30ff..bd89f7c 100644 --- a/arch/mips/dts/jr2_pcb110.dts +++ b/arch/mips/dts/jr2_pcb110.dts @@ -72,3 +72,70 @@ sgpio-ports = <0x3f00ffff>; gpio-ranges = <&sgpio2 0 0 96>; }; + +&mdio1 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + }; + port2: port@2 { + reg = <2>; + phy-handle = <&phy2>; + }; + port3: port@3 { + reg = <3>; + phy-handle = <&phy3>; + }; + port4: port@4 { + reg = <4>; + phy-handle = <&phy4>; + }; + port5: port@5 { + reg = <5>; + phy-handle = <&phy5>; + }; + port6: port@6 { + reg = <6>; + phy-handle = <&phy6>; + }; + port7: port@7 { + reg = <7>; + phy-handle = <&phy7>; + }; + }; +}; diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/mips/dts/jr2_pcb111.dts index 4d411b6..8b616c8 100644 --- a/arch/mips/dts/jr2_pcb111.dts +++ b/arch/mips/dts/jr2_pcb111.dts @@ -72,3 +72,355 @@ sgpio-ports = <0xff000000>; gpio-ranges = <&sgpio2 0 0 96>; }; + +&mdio1 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + }; + phy8: ethernet-phy@8 { + reg = <8>; + }; + phy9: ethernet-phy@9 { + reg = <9>; + }; + phy10: ethernet-phy@10 { + reg = <10>; + }; + phy11: ethernet-phy@11 { + reg = <11>; + }; + phy12: ethernet-phy@12 { + reg = <12>; + }; + phy13: ethernet-phy@13 { + reg = <13>; + }; + phy14: ethernet-phy@14 { + reg = <14>; + }; + phy15: ethernet-phy@15 { + reg = <15>; + }; + phy16: ethernet-phy@16 { + reg = <16>; + }; + phy17: ethernet-phy@17 { + reg = <17>; + }; + phy18: ethernet-phy@18 { + reg = <18>; + }; + phy19: ethernet-phy@19 { + reg = <19>; + }; + phy20: ethernet-phy@20 { + reg = <20>; + }; + phy21: ethernet-phy@21 { + reg = <21>; + }; + phy22: ethernet-phy@22 { + reg = <22>; + }; + phy23: ethernet-phy@23 { + reg = <23>; + }; +}; + +&mdio2 { + status = "okay"; + + phy24: ethernet-phy@24 { + reg = <0>; + }; + phy25: ethernet-phy@25 { + reg = <1>; + }; + phy26: ethernet-phy@26 { + reg = <2>; + }; + phy27: ethernet-phy@27 { + reg = <3>; + }; + phy28: ethernet-phy@28 { + reg = <4>; + }; + phy29: ethernet-phy@29 { + reg = <5>; + }; + phy30: ethernet-phy@30 { + reg = <6>; + }; + phy31: ethernet-phy@31 { + reg = <7>; + }; + phy32: ethernet-phy@32 { + reg = <8>; + }; + phy33: ethernet-phy@33 { + reg = <9>; + }; + phy34: ethernet-phy@34 { + reg = <10>; + }; + phy35: ethernet-phy@35 { + reg = <11>; + }; + phy36: ethernet-phy@36 { + reg = <12>; + }; + phy37: ethernet-phy@37 { + reg = <13>; + }; + phy38: ethernet-phy@38 { + reg = <14>; + }; + phy39: ethernet-phy@39 { + reg = <15>; + }; + phy40: ethernet-phy@40 { + reg = <16>; + }; + phy41: ethernet-phy@41 { + reg = <17>; + }; + phy42: ethernet-phy@42 { + reg = <18>; + }; + phy43: ethernet-phy@43 { + reg = <19>; + }; + phy44: ethernet-phy@44 { + reg = <20>; + }; + phy45: ethernet-phy@45 { + reg = <21>; + }; + phy46: ethernet-phy@46 { + reg = <22>; + }; + phy47: ethernet-phy@47 { + reg = <23>; + }; +}; + +&switch { + ethernet-ports { + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + }; + port2: port@2 { + reg = <2>; + phy-handle = <&phy2>; + }; + port3: port@3 { + reg = <3>; + phy-handle = <&phy3>; + }; + port4: port@4 { + reg = <4>; + phy-handle = <&phy4>; + }; + port5: port@5 { + reg = <5>; + phy-handle = <&phy5>; + }; + port6: port@6 { + reg = <6>; + phy-handle = <&phy6>; + }; + port7: port@7 { + reg = <7>; + phy-handle = <&phy7>; + }; + port8: port@8 { + reg = <8>; + phy-handle = <&phy8>; + }; + port9: port@9 { + reg = <9>; + phy-handle = <&phy9>; + }; + port10: port@10 { + reg = <10>; + phy-handle = <&phy10>; + }; + port11: port@11 { + reg = <11>; + phy-handle = <&phy11>; + }; + port12: port@12 { + reg = <12>; + phy-handle = <&phy12>; + }; + port13: port@13 { + reg = <13>; + phy-handle = <&phy13>; + }; + port14: port@14 { + reg = <14>; + phy-handle = <&phy14>; + }; + port15: port@15 { + reg = <15>; + phy-handle = <&phy15>; + }; + port16: port@16 { + reg = <16>; + phy-handle = <&phy16>; + }; + port17: port@17 { + reg = <17>; + phy-handle = <&phy17>; + }; + port18: port@18 { + reg = <18>; + phy-handle = <&phy18>; + }; + port19: port@19 { + reg = <19>; + phy-handle = <&phy19>; + }; + port20: port@20 { + reg = <20>; + phy-handle = <&phy20>; + }; + port21: port@21 { + reg = <21>; + phy-handle = <&phy21>; + }; + port22: port@22 { + reg = <22>; + phy-handle = <&phy22>; + }; + port23: port@23 { + reg = <23>; + phy-handle = <&phy23>; + }; + port24: port@24 { + reg = <24>; + phy-handle = <&phy24>; + }; + port25: port@25 { + reg = <25>; + phy-handle = <&phy25>; + }; + port26: port@26 { + reg = <26>; + phy-handle = <&phy26>; + }; + port27: port@27 { + reg = <27>; + phy-handle = <&phy27>; + }; + port28: port@28 { + reg = <28>; + phy-handle = <&phy28>; + }; + port29: port@29 { + reg = <29>; + phy-handle = <&phy29>; + }; + port30: port@30 { + reg = <30>; + phy-handle = <&phy30>; + }; + port31: port@31 { + reg = <31>; + phy-handle = <&phy31>; + }; + port32: port@32 { + reg = <32>; + phy-handle = <&phy32>; + }; + port33: port@33 { + reg = <33>; + phy-handle = <&phy33>; + }; + port34: port@34 { + reg = <34>; + phy-handle = <&phy34>; + }; + port35: port@35 { + reg = <35>; + phy-handle = <&phy35>; + }; + port36: port@36 { + reg = <36>; + phy-handle = <&phy36>; + }; + port37: port@37 { + reg = <37>; + phy-handle = <&phy37>; + }; + port38: port@38 { + reg = <38>; + phy-handle = <&phy38>; + }; + port39: port@39 { + reg = <39>; + phy-handle = <&phy39>; + }; + port40: port@40 { + reg = <40>; + phy-handle = <&phy40>; + }; + port41: port@41 { + reg = <41>; + phy-handle = <&phy41>; + }; + port42: port@42 { + reg = <42>; + phy-handle = <&phy42>; + }; + port43: port@43 { + reg = <43>; + phy-handle = <&phy43>; + }; + port44: port@44 { + reg = <44>; + phy-handle = <&phy44>; + }; + port45: port@45 { + reg = <45>; + phy-handle = <&phy45>; + }; + port46: port@46 { + reg = <46>; + phy-handle = <&phy46>; + }; + port47: port@47 { + reg = <47>; + phy-handle = <&phy47>; + }; + + }; +}; diff --git a/arch/mips/dts/mscc,jr2.dtsi b/arch/mips/dts/mscc,jr2.dtsi index 0900926..9592b52 100644 --- a/arch/mips/dts/mscc,jr2.dtsi +++ b/arch/mips/dts/mscc,jr2.dtsi @@ -183,5 +183,111 @@ gpio-bank-name = "sgpio2_"; sgpio-clock = <0x14>; }; + + switch: switch@1010000 { + compatible = "mscc,vsc7454-switch"; + reg = <0x01040000 0x0100>, // VTSS_TO_DEV_0 + <0x01050000 0x0100>, // VTSS_TO_DEV_1 + <0x01060000 0x0100>, // VTSS_TO_DEV_2 + <0x01070000 0x0100>, // VTSS_TO_DEV_3 + <0x01080000 0x0100>, // VTSS_TO_DEV_4 + <0x01090000 0x0100>, // VTSS_TO_DEV_5 + <0x010a0000 0x0100>, // VTSS_TO_DEV_6 + <0x010b0000 0x0100>, // VTSS_TO_DEV_7 + <0x010c0000 0x0100>, // VTSS_TO_DEV_8 + <0x010d0000 0x0100>, // VTSS_TO_DEV_9 + <0x010e0000 0x0100>, // VTSS_TO_DEV_10 + <0x010f0000 0x0100>, // VTSS_TO_DEV_11 + <0x01100000 0x0100>, // VTSS_TO_DEV_12 + <0x01110000 0x0100>, // VTSS_TO_DEV_13 + <0x01120000 0x0100>, // VTSS_TO_DEV_14 + <0x01130000 0x0100>, // VTSS_TO_DEV_15 + <0x01140000 0x0100>, // VTSS_TO_DEV_16 + <0x01150000 0x0100>, // VTSS_TO_DEV_17 + <0x01160000 0x0100>, // VTSS_TO_DEV_18 + <0x01170000 0x0100>, // VTSS_TO_DEV_19 + <0x01180000 0x0100>, // VTSS_TO_DEV_20 + <0x01190000 0x0100>, // VTSS_TO_DEV_21 + <0x011a0000 0x0100>, // VTSS_TO_DEV_22 + <0x011b0000 0x0100>, // VTSS_TO_DEV_23 + <0x011c0000 0x0100>, // VTSS_TO_DEV_24 + <0x011d0000 0x0100>, // VTSS_TO_DEV_25 + <0x011e0000 0x0100>, // VTSS_TO_DEV_26 + <0x011f0000 0x0100>, // VTSS_TO_DEV_27 + <0x01200000 0x0100>, // VTSS_TO_DEV_28 + <0x01210000 0x0100>, // VTSS_TO_DEV_29 + <0x01220000 0x0100>, // VTSS_TO_DEV_30 + <0x01230000 0x0100>, // VTSS_TO_DEV_31 + <0x01240000 0x0100>, // VTSS_TO_DEV_32 + <0x01250000 0x0100>, // VTSS_TO_DEV_33 + <0x01260000 0x0100>, // VTSS_TO_DEV_34 + <0x01270000 0x0100>, // VTSS_TO_DEV_35 + <0x01280000 0x0100>, // VTSS_TO_DEV_36 + <0x01290000 0x0100>, // VTSS_TO_DEV_37 + <0x012a0000 0x0100>, // VTSS_TO_DEV_38 + <0x012b0000 0x0100>, // VTSS_TO_DEV_39 + <0x012c0000 0x0100>, // VTSS_TO_DEV_40 + <0x012d0000 0x0100>, // VTSS_TO_DEV_41 + <0x012e0000 0x0100>, // VTSS_TO_DEV_42 + <0x012f0000 0x0100>, // VTSS_TO_DEV_43 + <0x01300000 0x0100>, // VTSS_TO_DEV_44 + <0x01310000 0x0100>, // VTSS_TO_DEV_45 + <0x01320000 0x0100>, // VTSS_TO_DEV_46 + <0x01330000 0x0100>, // VTSS_TO_DEV_47 + <0x01f00000 0x100000>, // ANA_AC + <0x01d00000 0x100000>, // ANA_CL + <0x01e00000 0x100000>, // ANA_L2 + <0x01410000 0x10000>, // ASM + <0x01460000 0x10000>, // HSIO + <0x01420000 0x00000>, // LRN + <0x017d0000 0x10000>, // QFWD + <0x01020000 0x20000>, // QS + <0x017e0000 0x10000>, // QSYS + <0x01b00000 0x80000>; // REW + reg-names = "port0", "port1", "port2", "port3", "port4", + "port5", "port6", "port7", "port8", "port9", + "port10", "port11", "port12", "port13", + "port14", "port15", "port16", "port17", + "port18", "port19", "port20", "port21", + "port22", "port23", "port24", "port25", + "port26", "port27", "port28", "port29", + "port30", "port31", "port32", "port33", + "port34", "port35", "port36", "port37", + "port38", "port39", "port40", "port41", + "port42", "port43", "port44", "port45", + "port46", "port47", "ana_ac", "ana_cl", + "ana_l2", "asm", "hsio", "lrn", "qfwd", + "qs", "qsys", "rew"; + status = "okay"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio0: mdio@010100c8 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100c8 0x24>; + status = "disabled"; + }; + + mdio1: mdio@010100ec { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100ec 0x24>; + status = "disabled"; + }; + + mdio2: mdio@01010110 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x01010110 0x24>; + status = "disabled"; + }; }; }; diff --git a/arch/mips/dts/serval2_pcb112.dts b/arch/mips/dts/serval2_pcb112.dts index fe025f4..3353a0b 100644 --- a/arch/mips/dts/serval2_pcb112.dts +++ b/arch/mips/dts/serval2_pcb112.dts @@ -58,3 +58,42 @@ status = "okay"; sgpio-ports = <0x3fe0ffff>; }; + +&mdio0 { + status = "okay"; + + phy16: ethernet-phy@16 { + reg = <16>; + }; + phy17: ethernet-phy@17 { + reg = <17>; + }; + phy18: ethernet-phy@18 { + reg = <18>; + }; + phy19: ethernet-phy@19 { + reg = <19>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <24>; + phy-handle = <&phy16>; + }; + port1: port@1 { + reg = <25>; + phy-handle = <&phy17>; + }; + port2: port@2 { + reg = <26>; + phy-handle = <&phy18>; + }; + port3: port@3 { + reg = <27>; + phy-handle = <&phy19>; + }; + }; +};