Please ignore my question because it is answered by [PATCH v2 34/80].
On 03/26/2015 11:38 AM, Jim Lin wrote:
-----Original Message----- From: U-Boot [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Simon Glass Sent: Thursday, March 26, 2015 2:23 AM To: U-Boot Mailing List Cc: Marek Vasut; Stephen Warren; Vivek Gautam; Tom Warren Subject: [U-Boot] [PATCH v2 57/80] dm: usb: tegra: Remove the port_addr_clear_csc variable
This variable is a bit of a hack. We can obtain the same information from the normal device config. This will fit better with driver model, where global variables > are best avoided.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v2: None
drivers/usb/host/ehci-tegra.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 38333c7..464f55d 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -87,8 +87,6 @@ struct fdt_usb {
static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ static unsigned port_count; /* Number of available ports */ -/* Port that needs to clear CSC after Port Reset */ -static u32 port_addr_clear_csc;
/*
- This table has USB timing parameters for each Oscillator frequency we @@ -206,7 +204,7 @@ static void tegra_ehci_powerup_fixup(struct ehci_ctrl *ctrl,
if (controller->has_hostpc)*reg |= EHCI_PS_PE;
- if (((u32)status_reg & TEGRA_USB_ADDR_MASK) != port_addr_clear_csc)
- if (!config->has_legacy_mode) return;
How do we get config (config->has_legacy_mode) for in this function? If you read ehci_set_usbmode, "config" comes from "config = &port[index];". Or "config" is an input argument like set_up_vbus(struct fdt_usb *config, ...) But for ehci_powerup_fixup, I don't see a way for us to get "config".
/* For EHCI_PS_CSC to be cleared in ehci_hcd.c */
--nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot