Migrate the values for ENV_SIZE and ENV_OFFSET into board specific Kconfig defaults so they're more accessible for configuration.
---
v2 changes: - none v3 changes: - none v4 changes: - none
Signed-off-by: Joel Johnson mrjoel@lixil.net --- board/solidrun/clearfog/Kconfig | 8 ++++++++ configs/clearfog_defconfig | 2 -- 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/board/solidrun/clearfog/Kconfig b/board/solidrun/clearfog/Kconfig index d3209d9b8e..fbaeed1a4f 100644 --- a/board/solidrun/clearfog/Kconfig +++ b/board/solidrun/clearfog/Kconfig @@ -22,6 +22,14 @@ config CLEARFOG_SFP_25GB SGMII connection (requires a supporting SFP). By default, transfer speed of 1.25 Gbps is used, suitable for a more common 1 Gbps SFP module.
+config ENV_SIZE + hex "Environment Size" + default 0x10000 + +config ENV_OFFSET + hex "Environment offset" + default 0xF0000 + config ENV_SECT_SIZE hex "Environment Sector-Size" # Use SPI flash erase block size of 4 KiB diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index c938448c30..6db8b8acf6 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -9,8 +9,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CLEARFOG=y CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y -CONFIG_ENV_SIZE=0x10000 -CONFIG_ENV_OFFSET=0xF0000 CONFIG_DM_GPIO=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y