On Wed, Mar 18, 2015 at 3:53 PM, andrej@inversepath.com wrote:
From: Andrej Rosano andrej@inversepath.com
Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on Freescale i.MX53 SoC.
http://inversepath.com/usbarmory
Signed-off-by: Andrej Rosano andrej@inversepath.com Cc: Stefano Babic sbabic@denx.de Cc: Chris Kuethe chris.kuethe@gmail.com Cc: Fabio Estevam festevam@gmail.com
Tested-by: Chris Kuethe chris.kuethe@gmail.com
--- I don't have the default kernel image in place; the board boots when I do point it at a valid image.
U-Boot 2015.04-rc4-dirty (Mar 18 2015 - 16:12:11)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: Inverse Path USB armory MkI I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 1 0 ** File not found /boot/uImage ** 16610 bytes read in 70 ms (231.4 KiB/s) Wrong Image Format for bootm command ERROR: can't get kernel image! => reset resetting ...
U-Boot 2015.04-rc4-dirty (Mar 18 2015 - 16:12:11)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Board: Inverse Path USB armory MkI I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 1 0 ** File not found /boot/uImage ** 16610 bytes read in 69 ms (234.4 KiB/s) Wrong Image Format for bootm command ERROR: can't get kernel image! =>