On 15.06.23 13:19, Simon Glass wrote:
Hi Jan,
On Thu, 15 Jun 2023 at 12:09, Jan Kiszka jan.kiszka@siemens.com wrote:
On 15.06.23 12:55, Simon Glass wrote:
Hi Jan,
On Thu, 15 Jun 2023 at 11:26, Jan Kiszka jan.kiszka@siemens.com wrote:
On 12.06.23 23:17, Simon Glass wrote:
Hi Jan,
On Mon, 5 Jun 2023 at 15:39, Jan Kiszka jan.kiszka@siemens.com wrote:
From: Jan Kiszka jan.kiszka@siemens.com
Introduce BINMAN_EXTRA_ARGS that can be set per board, e.g., to inject specific settings. Will be used by IOT2050 first to define multiple of-lists.
Signed-off-by: Jan Kiszka jan.kiszka@siemens.com
CC: Simon Glass sjg@chromium.org
Makefile | 1 + 1 file changed, 1 insertion(+)
I'm really not keen on this, since it means that the Makefile (or some vars it sets) are again involved in controlling the image generation. It should really all be in the binman image description / .dtsi file
binman does not allow me to unrole of-list inside the dts file, does it? With such a feature, I wouldn't need any custom -a of-list-X switches and, thus, no such EXTRA_ARGS.
Can you explain a bit more about what you mean by 'unrole'? It is just software, so anything should be possible.
To use a DT sequence, I need to specify fit,ftd-list. But I can say
fit,ftd-list = "first.dtb second.dtb"
I rather need to go via the EntryArg indirection of the binman command line.
Do you mean you would rather not use '-a CONFIG_OF_LIST'. Or are you wanting to filter that list based on something else?
I'm afraid I am really not following this at all.
CONFIG_OF_LIST is not working here as we have two different boards with two different lists.
Jan