Add code to reset all reset signals as in serial DT node. A reset property is an optional feature, so do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset.
Signed-off-by: Ley Foon Tan ley.foon.tan@intel.com Reviewed-by: Marek Vasut marex@denx.de --- drivers/serial/ns16550.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 53550bf..457b636 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -9,6 +9,7 @@ #include <dm.h> #include <errno.h> #include <ns16550.h> +#include <reset.h> #include <serial.h> #include <watchdog.h> #include <linux/types.h> @@ -177,6 +178,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) #if defined(CONFIG_ARCH_OMAP2PLUS) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif + serial_out(UART_MCRVAL, &com_port->mcr); serial_out(ns16550_getfcr(com_port), &com_port->fcr); if (baud_divisor != -1) @@ -371,6 +373,16 @@ int ns16550_serial_probe(struct udevice *dev) { struct NS16550 *const com_port = dev_get_priv(dev);
+#ifdef CONFIG_DM_RESET + struct reset_ctl_bulk reset_bulk; + int ret; + + ret = reset_get_bulk(dev, &reset_bulk); + if (!ret) + reset_deassert_bulk(&reset_bulk); + +#endif + com_port->plat = dev_get_platdata(dev); NS16550_init(com_port, -1);