If the system is in a dual parallel configuration, it's necessary to halve the erase size since the erase command operates on two flashes simultaneously. When dealing with a dual-stacked configuration, determine whether the erase offset refers to the top or bottom flash, and subsequently, adjust the flag for the relevant flash. Consequently, the argument for the spi_nor_erase_sector function has been modified from addr to offset.
Signed-off-by: Tejas Bhumkar tejas.arvind.bhumkar@amd.com --- drivers/mtd/spi/spi-nor-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index b9326d2b47..e0398a7a29 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -1095,7 +1095,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) } } #ifdef CONFIG_SPI_FLASH_BAR - ret = write_bar(nor, addr); + ret = write_bar(nor, offset); if (ret < 0) goto erase_err; #endif @@ -1107,7 +1107,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) { ret = spi_nor_erase_chip(nor); } else { - ret = spi_nor_erase_sector(nor, addr); + ret = spi_nor_erase_sector(nor, offset); } if (ret < 0) goto erase_err;