From: Pavel Machek pavel@denx.de
Add code necessary to program the FPGA part of SoCFPGA from U-Boot with an RBF blob. This patch also integrates the code into the FPGA driver framework in U-Boot so it can be used via the 'fpga' command.
Signed-off-by: Pavel Machek pavel@denx.de Signed-off-by: Marek Vasut marex@denx.de Cc: Chin Liang See clsee@altera.com Cc: Dinh Nguyen dinguyen@altera.com Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Tom Rini trini@ti.com Cc: Wolfgang Denk wd@denx.de Cc: Pavel Machek pavel@denx.de --- arch/arm/cpu/armv7/socfpga/Makefile | 3 +- arch/arm/cpu/armv7/socfpga/fpga_manager.c | 78 ++++++ arch/arm/cpu/armv7/socfpga/misc.c | 37 +++ arch/arm/include/asm/arch-socfpga/fpga_manager.h | 77 ++++++ drivers/fpga/Makefile | 1 + drivers/fpga/altera.c | 3 + drivers/fpga/socfpga.c | 301 +++++++++++++++++++++++ include/altera.h | 6 + 8 files changed, 505 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/socfpga/fpga_manager.c create mode 100644 arch/arm/include/asm/arch-socfpga/fpga_manager.h create mode 100644 drivers/fpga/socfpga.c
V2: Move the not-CPU specific stuff into drivers/fpga/ and base this on the cleaned up altera FPGA support.
diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile index eb33f2c..8b6e108 100644 --- a/arch/arm/cpu/armv7/socfpga/Makefile +++ b/arch/arm/cpu/armv7/socfpga/Makefile @@ -8,5 +8,6 @@ #
obj-y := lowlevel_init.o -obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o +obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \ + fpga_manager.o obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o scan_manager.o diff --git a/arch/arm/cpu/armv7/socfpga/fpga_manager.c b/arch/arm/cpu/armv7/socfpga/fpga_manager.c new file mode 100644 index 0000000..43fd2fe --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/fpga_manager.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * All rights reserved. + * + * This file contains only support functions used also by the SoCFPGA + * platform code, the real meat is located in drivers/fpga/socfpga.c . + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/fpga_manager.h> +#include <asm/arch/reset_manager.h> +#include <asm/arch/system_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Timeout count */ +#define FPGA_TIMEOUT_CNT 0x1000000 + +static struct socfpga_fpga_manager *fpgamgr_regs = + (struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS; + +/* Check whether FPGA Init_Done signal is high */ +static int is_fpgamgr_initdone_high(void) +{ + unsigned long val; + + val = readl(&fpgamgr_regs->gpio_ext_porta); + return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK; +} + +/* Get the FPGA mode */ +int fpgamgr_get_mode(void) +{ + unsigned long val; + + val = readl(&fpgamgr_regs->stat); + return val & FPGAMGRREGS_STAT_MODE_MASK; +} + +/* Check whether FPGA is ready to be accessed */ +int fpgamgr_test_fpga_ready(void) +{ + /* Check for init done signal */ + if (!is_fpgamgr_initdone_high()) + return 0; + + /* Check again to avoid false glitches */ + if (!is_fpgamgr_initdone_high()) + return 0; + + if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE) + return 0; + + return 1; +} + +/* Poll until FPGA is ready to be accessed or timeout occurred */ +int fpgamgr_poll_fpga_ready(void) +{ + unsigned long i; + + /* If FPGA is blank, wait till WD invoke warm reset */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + /* check for init done signal */ + if (!is_fpgamgr_initdone_high()) + continue; + /* check again to avoid false glitches */ + if (!is_fpgamgr_initdone_high()) + continue; + return 1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index 1d878df..8c30b61 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -6,6 +6,7 @@
#include <common.h> #include <asm/io.h> +#include <altera.h> #include <miiphy.h> #include <netdev.h> #include <asm/arch/reset_manager.h> @@ -93,8 +94,44 @@ int overwrite_console(void) } #endif
+#ifdef CONFIG_FPGA +/* + * FPGA programming support for SoC FPGA Cyclone V + */ +static Altera_desc altera_fpga[] = { + { + /* Family */ + Altera_SoCFPGA, + /* Interface type */ + fast_passive_parallel, + /* No limitation as additional data will be ignored */ + -1, + /* No device function table */ + NULL, + /* Base interface address specified in driver */ + NULL, + /* No cookie implementation */ + 0 + }, +}; + +/* add device descriptor to FPGA device table */ +static void socfpga_fpga_add(void) +{ + int i; + fpga_init(); + for (i = 0; i < ARRAY_SIZE(altera_fpga); i++) + fpga_add(fpga_altera, &altera_fpga[i]); +} +#else +static inline void socfpga_fpga_add(void) {} +#endif + int misc_init_r(void) { + /* Add device descriptor to FPGA device table */ + socfpga_fpga_add(); + /* * If the HW watchdog is NOT enabled, make sure it is not running, * for example because it was enabled in the preloader. This might diff --git a/arch/arm/include/asm/arch-socfpga/fpga_manager.h b/arch/arm/include/asm/arch-socfpga/fpga_manager.h new file mode 100644 index 0000000..a077e22 --- /dev/null +++ b/arch/arm/include/asm/arch-socfpga/fpga_manager.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef _FPGA_MANAGER_H_ +#define _FPGA_MANAGER_H_ + +#include <altera.h> + +struct socfpga_fpga_manager { + /* FPGA Manager Module */ + u32 stat; /* 0x00 */ + u32 ctrl; + u32 dclkcnt; + u32 dclkstat; + u32 gpo; /* 0x10 */ + u32 gpi; + u32 misci; /* 0x18 */ + u32 _pad_0x1c_0x82c[517]; + + /* Configuration Monitor (MON) Registers */ + u32 gpio_inten; /* 0x830 */ + u32 gpio_intmask; + u32 gpio_inttype_level; + u32 gpio_int_polarity; + u32 gpio_intstatus; /* 0x840 */ + u32 gpio_raw_intstatus; + u32 _pad_0x848; + u32 gpio_porta_eoi; + u32 gpio_ext_porta; /* 0x850 */ + u32 _pad_0x854_0x85c[3]; + u32 gpio_1s_sync; /* 0x860 */ + u32 _pad_0x864_0x868[2]; + u32 gpio_ver_id_code; + u32 gpio_config_reg2; /* 0x870 */ + u32 gpio_config_reg1; +}; + +#define FPGAMGRREGS_STAT_MODE_MASK 0x7 +#define FPGAMGRREGS_STAT_MSEL_MASK 0xf8 +#define FPGAMGRREGS_STAT_MSEL_LSB 3 + +#define FPGAMGRREGS_CTRL_CFGWDTH_MASK 0x200 +#define FPGAMGRREGS_CTRL_AXICFGEN_MASK 0x100 +#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK 0x4 +#define FPGAMGRREGS_CTRL_NCE_MASK 0x2 +#define FPGAMGRREGS_CTRL_EN_MASK 0x1 +#define FPGAMGRREGS_CTRL_CDRATIO_LSB 6 + +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK 0x8 +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK 0x4 +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK 0x2 +#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK 0x1 + +/* FPGA Mode */ +#define FPGAMGRREGS_MODE_FPGAOFF 0x0 +#define FPGAMGRREGS_MODE_RESETPHASE 0x1 +#define FPGAMGRREGS_MODE_CFGPHASE 0x2 +#define FPGAMGRREGS_MODE_INITPHASE 0x3 +#define FPGAMGRREGS_MODE_USERMODE 0x4 +#define FPGAMGRREGS_MODE_UNKNOWN 0x5 + +/* FPGA CD Ratio Value */ +#define CDRATIO_x1 0x0 +#define CDRATIO_x2 0x1 +#define CDRATIO_x4 0x2 +#define CDRATIO_x8 0x3 + +/* SoCFPGA support functions */ +int fpgamgr_test_fpga_ready(void); +int fpgamgr_poll_fpga_ready(void); +int fpgamgr_get_mode(void); + +#endif /* _FPGA_MANAGER_H_ */ diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index dfb2e7f..6aa24d4 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -17,4 +17,5 @@ obj-y += altera.o obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o +obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o endif diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c index fd2b4f0..a5bfe5d 100644 --- a/drivers/fpga/altera.c +++ b/drivers/fpga/altera.c @@ -37,6 +37,9 @@ static const struct altera_fpga { { Altera_StratixII, "StratixII", StratixII_load, StratixII_dump, StratixII_info }, #endif +#if defined(CONFIG_FPGA_SOCFPGA) + { Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL }, +#endif };
static int altera_validate(Altera_desc *desc, const char *fn) diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c new file mode 100644 index 0000000..63b3566 --- /dev/null +++ b/drivers/fpga/socfpga.c @@ -0,0 +1,301 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/fpga_manager.h> +#include <asm/arch/reset_manager.h> +#include <asm/arch/system_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Timeout count */ +#define FPGA_TIMEOUT_CNT 0x1000000 + +static struct socfpga_fpga_manager *fpgamgr_regs = + (struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS; +static struct socfpga_system_manager *sysmgr_regs = + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; + +/* Set CD ratio */ +static void fpgamgr_set_cd_ratio(unsigned long ratio) +{ + clrsetbits_le32(&fpgamgr_regs->ctrl, + 0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB, + (ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB); +} + +static int fpgamgr_dclkcnt_set(unsigned long cnt) +{ + unsigned long i; + + /* Clear any existing done status */ + if (readl(&fpgamgr_regs->dclkstat)) + writel(0x1, &fpgamgr_regs->dclkstat); + + /* Write the dclkcnt */ + writel(cnt, &fpgamgr_regs->dclkcnt); + + /* Wait till the dclkcnt done */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + if (!readl(&fpgamgr_regs->dclkstat)) + continue; + + writel(0x1, &fpgamgr_regs->dclkstat); + return 0; + } + + return -ETIMEDOUT; +} + +/* Start the FPGA programming by initialize the FPGA Manager */ +static int fpgamgr_program_init(void) +{ + unsigned long msel, i; + + /* Get the MSEL value */ + msel = readl(&fpgamgr_regs->stat); + msel &= FPGAMGRREGS_STAT_MSEL_MASK; + msel >>= FPGAMGRREGS_STAT_MSEL_LSB; + + /* + * Set the cfg width + * If MSEL[3] = 1, cfg width = 32 bit + */ + if (msel & 0x8) { + setbits_le32(&fpgamgr_regs->ctrl, + FPGAMGRREGS_CTRL_CFGWDTH_MASK); + + /* To determine the CD ratio */ + /* MSEL[1:0] = 0, CD Ratio = 1 */ + if ((msel & 0x3) == 0x0) + fpgamgr_set_cd_ratio(CDRATIO_x1); + /* MSEL[1:0] = 1, CD Ratio = 4 */ + else if ((msel & 0x3) == 0x1) + fpgamgr_set_cd_ratio(CDRATIO_x4); + /* MSEL[1:0] = 2, CD Ratio = 8 */ + else if ((msel & 0x3) == 0x2) + fpgamgr_set_cd_ratio(CDRATIO_x8); + + } else { /* MSEL[3] = 0 */ + clrbits_le32(&fpgamgr_regs->ctrl, + FPGAMGRREGS_CTRL_CFGWDTH_MASK); + + /* To determine the CD ratio */ + /* MSEL[1:0] = 0, CD Ratio = 1 */ + if ((msel & 0x3) == 0x0) + fpgamgr_set_cd_ratio(CDRATIO_x1); + /* MSEL[1:0] = 1, CD Ratio = 2 */ + else if ((msel & 0x3) == 0x1) + fpgamgr_set_cd_ratio(CDRATIO_x2); + /* MSEL[1:0] = 2, CD Ratio = 4 */ + else if ((msel & 0x3) == 0x2) + fpgamgr_set_cd_ratio(CDRATIO_x4); + } + + /* To enable FPGA Manager configuration */ + clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCE_MASK); + + /* To enable FPGA Manager drive over configuration line */ + setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK); + + /* Put FPGA into reset phase */ + setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK); + + /* (1) wait until FPGA enter reset phase */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_RESETPHASE) + break; + } + + /* If not in reset state, return error */ + if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) { + puts("FPGA: Could not reset\n"); + return -1; + } + + /* Release FPGA from reset phase */ + clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK); + + /* (2) wait until FPGA enter configuration phase */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_CFGPHASE) + break; + } + + /* If not in configuration state, return error */ + if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) { + puts("FPGA: Could not configure\n"); + return -2; + } + + /* Clear all interrupts in CB Monitor */ + writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi); + + /* Enable AXI configuration */ + setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK); + + return 0; +} + +/* Write the RBF data to FPGA Manager */ +static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size) +{ + uint32_t src = (uint32_t)rbf_data; + uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS; + + /* Number of loops for 32-byte long copying. */ + uint32_t loops32 = rbf_size / 32; + /* Number of loops for 4-byte long copying + trailing bytes */ + uint32_t loops4 = DIV_ROUND_UP(rbf_size % 32, 4); + + asm volatile( + "1: ldmia %0!, {r0-r7}\n" + " stmia %1!, {r0-r7}\n" + " sub %1, #32\n" + " subs %2, #1\n" + " bne 1b\n" + "2: ldr %2, [%0], #4\n" + " str %2, [%1]\n" + " subs %3, #1\n" + " bne 2b\n" + : "+r"(src), "+r"(dst), "+r"(loops32), "+r"(loops4) : + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "cc"); +} + +/* Ensure the FPGA entering config done */ +static int fpgamgr_program_poll_cd(void) +{ + const uint32_t mask = FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK | + FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK; + unsigned long reg, i; + + /* (3) wait until full config done */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + reg = readl(&fpgamgr_regs->gpio_ext_porta); + + /* Config error */ + if (!(reg & mask)) { + printf("FPGA: Configuration error.\n"); + return -3; + } + + /* Config done without error */ + if (reg & mask) + break; + } + + /* Timeout happened, return error */ + if (i == FPGA_TIMEOUT_CNT) { + printf("FPGA: Timeout waiting for program.\n"); + return -4; + } + + /* Disable AXI configuration */ + clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK); + + return 0; +} + +/* Ensure the FPGA entering init phase */ +static int fpgamgr_program_poll_initphase(void) +{ + unsigned long i; + + /* Additional clocks for the CB to enter initialization phase */ + if (fpgamgr_dclkcnt_set(0x4)) + return -5; + + /* (4) wait until FPGA enter init phase or user mode */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_INITPHASE) + break; + if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE) + break; + } + + /* If not in configuration state, return error */ + if (i == FPGA_TIMEOUT_CNT) + return -6; + + return 0; +} + +/* Ensure the FPGA entering user mode */ +static int fpgamgr_program_poll_usermode(void) +{ + unsigned long i; + + /* Additional clocks for the CB to exit initialization phase */ + if (fpgamgr_dclkcnt_set(0x5000)) + return -7; + + /* (5) wait until FPGA enter user mode */ + for (i = 0; i < FPGA_TIMEOUT_CNT; i++) { + if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE) + break; + } + /* If not in configuration state, return error */ + if (i == FPGA_TIMEOUT_CNT) + return -8; + + /* To release FPGA Manager drive over configuration line */ + clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK); + + return 0; +} + +/* + * FPGA Manager to program the FPGA. This is the interface used by FPGA driver. + * Return 0 for sucess, non-zero for error. + */ +int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size) +{ + unsigned long status; + + if ((uint32_t)rbf_data & 0x3) { + puts("FPGA: Unaligned data, realign to 32bit boundary.\n"); + return -EINVAL; + } + + /* Prior programming the FPGA, all bridges need to be shut off */ + + /* Disable all signals from hps peripheral controller to fpga */ + writel(0, &sysmgr_regs->fpgaintfgrp_module); + + /* Disable all signals from FPGA to HPS SDRAM */ +#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080 + writel(0, SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_FPGAPORTRST_ADDRESS); + + /* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */ + socfpga_bridges_reset(1); + + /* Unmap the bridges from NIC-301 */ + writel(0x1, SOCFPGA_L3REGS_ADDRESS); + + /* Initialize the FPGA Manager */ + status = fpgamgr_program_init(); + if (status) + return status; + + /* Write the RBF data to FPGA Manager */ + fpgamgr_program_write(rbf_data, rbf_size); + + /* Ensure the FPGA entering config done */ + status = fpgamgr_program_poll_cd(); + if (status) + return status; + + /* Ensure the FPGA entering init phase */ + status = fpgamgr_program_poll_initphase(); + if (status) + return status; + + /* Ensure the FPGA entering user mode */ + return fpgamgr_program_poll_usermode(); +} diff --git a/include/altera.h b/include/altera.h index e266a64..c2991ad 100644 --- a/include/altera.h +++ b/include/altera.h @@ -40,6 +40,8 @@ enum altera_family { Altera_CYC2, /* StratixII Family */ Altera_StratixII, + /* SoCFPGA Family */ + Altera_SoCFPGA,
/* Add new models here */
@@ -91,4 +93,8 @@ typedef struct { Altera_post_fn post; } altera_board_specific_func;
+#ifdef CONFIG_FPGA_SOCFPGA +int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size); +#endif + #endif /* _ALTERA_H_ */