Hello Ilias,
2021年5月23日(日) 17:07 Ilias Apalodimas ilias.apalodimas@linaro.org:
Hi Masami,
On Wed, May 19, 2021 at 02:44:21PM +0900, Masami Hiramatsu wrote:
Hi,
Here is the 4th version of the series (including some fixes for build errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
This series includes not only DeveloperBox support but also some fixes for the issues which I faced while porting U-Boot on the DeveloperBox. First 3 patches are fixes, next 1 patch is a code cleanup for generic gpio for arm. The next 7 patches adding DeveloperBox devices and board support. The last 3 patches are related to the UEFI capsule update (including bugfixes).
Previous version is here:
The default debug level is set to 7. I think it would be better to set it to something more reasonable for the final commit.
Yes, it was for the development value. It should be removed from defconfig at last, because it depends on the builder's choice.
Unfortunately I don't have time for a more detailed review, but I did manage to run this on my Synquacer and managed to run a full linux distro with EFI.
Tested-by: Ilias Apalodimas ilias.apalodimas@linaro.org
Thanks for testing!
Thank you,
Changes in v4
I dropped a PCI bugfix because it has been merged. And add I2C driver and enable RTC and EBBR support on the configuration.
[06/14]: - Add Jaehoon's reviewed-by (Thanks!) [09/14]: - Add a new i2c driver. [10/14]: - Add i2c0 and RTC node. [11/14]: - Add I2C and RTC configuration. - Enable RTC and Date command. - Remove I2C0 node before booting linux to hide it same as EDK2 does. - Add some configurations to make it EBBR compliant. [14/14]: - Add some config options for EBBR.
BTW, should I split fixes from this series? (since I didn't expect this took so long...)
DeveloperBox
DeveloperBox is a certified 96boards Enterprise Edition board. The board/SoC has: -
- Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor motherboard
- 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default)
- 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots (1x slots are connected via PCIe bridge chip)
- 4 USB-3.0 ports
- 2 SATA ports
- 1 GbE network port
- 1 USB-UART serial port (micro USB)
- 64MB SPI NOR Flash
- 8GB eMMC Flash Storage
- 96boards LS connector
The DeveloperBox schematic can be found here: - https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs...
And the other documents can be found here: - https://www.96boards.org/documentation/enterprise/developerbox/
Currently, the U-Boot port supports: -
- USB
- eMMC
- SPI-NOR
- SATA
- GbE
The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default. The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as BL33, but no need to combine with it.
Thank you,
Jassi Brar (4): mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver spi: synquacer: Add HSSPI SPI controller driver for SynQuacer net: synquacer: Add netsec driver i2c: synquacer: SNI Synquacer I2C controller
Masami Hiramatsu (10): ata: ahci-pci: Use scsi_ops to initialize ops dm: pci: Skip setting VGA bridge bits if parent device is the host bus efi: Fix to use null handle to create new handle for efi_fmp_raw gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs pci: synquacer: Add SynQuacer ECAM based PCIe driver ARM: dts: synquacer: Add device trees for DeveloperBox board: synquacer: Add DeveloperBox 96boards EE support dfu_mtd: Ignore non-implemented lock device failure doc: qemu: arm64: Fix the documentation of capsule update configs: synquacer: Enable EFI capsule update support
arch/arm/Kconfig | 108 ++ arch/arm/dts/Makefile | 2 arch/arm/dts/synquacer-sc2a11-caches.dtsi | 73 + .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 75 + arch/arm/dts/synquacer-sc2a11-developerbox.dts | 56 + arch/arm/dts/synquacer-sc2a11.dtsi | 595 ++++++++++ arch/arm/include/asm/gpio.h | 8 board/socionext/developerbox/Kconfig | 36 + board/socionext/developerbox/MAINTAINERS | 14 board/socionext/developerbox/Makefile | 9 board/socionext/developerbox/developerbox.c | 146 +++ configs/synquacer_developerbox_defconfig | 131 ++ doc/board/emulation/qemu_capsule_update.rst | 11 doc/board/index.rst | 1 doc/board/socionext/developerbox.rst | 87 ++ doc/board/socionext/index.rst | 9 drivers/ata/ahci-pci.c | 2 drivers/dfu/dfu_mtd.c | 2 drivers/i2c/Kconfig | 7 drivers/i2c/Makefile | 1 drivers/i2c/synquacer_i2c.c | 338 ++++++ drivers/mmc/Kconfig | 10 drivers/mmc/Makefile | 1 drivers/mmc/f_sdh30.c | 81 + drivers/net/Kconfig | 8 drivers/net/Makefile | 1 drivers/net/sni_netsec.c | 1134 ++++++++++++++++++++ drivers/pci/Kconfig | 12 drivers/pci/Makefile | 1 drivers/pci/pci-uclass.c | 3 drivers/pci/pcie_ecam_synquacer.c | 600 +++++++++++ drivers/spi/Kconfig | 8 drivers/spi/Makefile | 1 drivers/spi/spi-synquacer.c | 491 +++++++++ include/configs/synquacer.h | 115 ++ lib/efi_loader/efi_capsule.c | 2 36 files changed, 4162 insertions(+), 17 deletions(-) create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi create mode 100644 board/socionext/developerbox/Kconfig create mode 100644 board/socionext/developerbox/MAINTAINERS create mode 100644 board/socionext/developerbox/Makefile create mode 100644 board/socionext/developerbox/developerbox.c create mode 100644 configs/synquacer_developerbox_defconfig create mode 100644 doc/board/socionext/developerbox.rst create mode 100644 doc/board/socionext/index.rst create mode 100644 drivers/i2c/synquacer_i2c.c create mode 100644 drivers/mmc/f_sdh30.c create mode 100644 drivers/net/sni_netsec.c create mode 100644 drivers/pci/pcie_ecam_synquacer.c create mode 100644 drivers/spi/spi-synquacer.c create mode 100644 include/configs/synquacer.h
-- Masami Hiramatsu masami.hiramatsu@linaro.org
-- Masami Hiramatsu