[U-Boot] AT91SAM9M10 Custom Board U-boot reboot after Wrong Image Format

Hi

Our board reboots after send Wrong Image Format message to the console and hangs. The Linux uImage is correctly placed in the NAND 0X200000. The console input is somehow inhibit. I cannot type anything on it until the board reboots . The board is an AT91SAM9M10 custom board based on the AT91SAM9M10G45-ek development kit. It has only USB, Serial(DBGU), DDR2 and NAND. I have tried to remove the LCD code but the linker says that printk is missing.

Any clue? Thanks

-- View this message in context: http://u-boot.10912.n7.nabble.com/AT91SAM9M10-Custom-Board-U-boot-reboot-aft... Sent from the U-Boot mailing list archive at Nabble.com.