-----Original Message----- From: Edward L Swarthout Sent: Saturday, July 02, 2016 5:44 AM To: Prabhakar Kushwaha; york sun; Qianyu Gong; albert.u.boot@aribaud.net; u-boot@lists.denx.de; s.temerkhanov@gmail.com; yamada.masahiro@socionext.com Cc: Mingkai Hu Subject: RE: [U-Boot] [PATCH] armv8: Enable CPUECTLR.SMPEN for data coherency
From: Prabhakar Kushwaha
From: U-Boot [mailto:u-boot-bounces@lists.denx.de] On Behalf Of york On 06/30/2016 02:03 AM, Gong Qianyu wrote:
From: Mingkai Hu mingkai.hu@nxp.com
Data coherency is enabled only when the CPUECTLR.SMPEN bit is set. The SMPEN bit should be set before enabling the data cache. If not enabled, the cache is not coherent with other cores and data corruption could occur.
- /* Enalbe SMPEN bit */
- mrs x0, S3_1_c15_c2_1 /* cpuactlr_el1 */
- orr x0, x0, #0x40
- msr S3_1_c15_c2_1, x0
I wonder what impact this patch has. Did you find it effective on A53
core?
According to ARM documents, A57 and A72 seem don't care this bit.
I have seen big difference on LS1012A with A53 cores after enabling this
bit.
If I don't enable this bit many IPs like SATA, SDHC show coherency issue.
But LS1012A only has a single A53 core. The multicore part, LS1043A, sets this bit in the bootrom:
34: d539f221 mrs x1, s3_1_c15_c2_1 38: b27a0021 orr x1, x1, #0x40 3c: d519f221 msr s3_1_c15_c2_1, x1
This bit needs to be set even only one core.
And bootrom did not set this bit, so the coherency issue was caused.
Thanks, Mingkai