Now UniPhier SoCs only work with CONFIG_SPL and the function sbc_init() is called from SPL. The conditional #if !defined(CONFIG_SPL_BUILD) has no point any more.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c | 11 +++++----- arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 10 ++++----- arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c | 28 ++++++++++++------------- 3 files changed, 24 insertions(+), 25 deletions(-)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c index 4839c94..3246465 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011-2014 Panasonic Corporation + * Copyright (C) 2011-2015 Panasonic Corporation * Author: Masahiro Yamada yamada.m@jp.panasonic.com * * SPDX-License-Identifier: GPL-2.0+ @@ -25,13 +25,12 @@ void sbc_init(void) writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-#if !defined(CONFIG_SPL_BUILD) /* XECS0: boot/sub memory (boot swap = off/on) */ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif + /* XECS3: peripherals */ writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); @@ -43,9 +42,9 @@ void sbc_init(void) writel(0x0400bc01, SBBASE1); writel(0x0800bf01, SBBASE3);
-#if !defined(CONFIG_SPL_BUILD) /* enable access to sub memory when boot swap is on */ - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ -#endif + if (boot_is_swapped()) + sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ + sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ } diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c index 6877029..be2d8fe 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c @@ -42,13 +42,12 @@ void sbc_init(void) writel(0x0200be01, SBBASE1); } #elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -#if !defined(CONFIG_SPL_BUILD) /* XECS0: boot/sub memory (boot swap = off/on) */ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif + /* XECS1: sub/boot memory (boot swap = off/on) */ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); @@ -65,9 +64,10 @@ void sbc_init(void) writel(0x0400bc01, SBBASE1); /* sub memory */ writel(0x0800bf01, SBBASE3); /* peripherals */
-#if !defined(CONFIG_SPL_BUILD) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ -#endif + /* enable access to sub memory when boot swap is on */ + if (boot_is_swapped()) + sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ + sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ writel(0x00000001, SG_LOADPINCTRL);
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c index 5efee9c..a2ba5dc 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011-2014 Panasonic Corporation + * Copyright (C) 2011-2015 Panasonic Corporation * Author: Masahiro Yamada yamada.m@jp.panasonic.com * * SPDX-License-Identifier: GPL-2.0+ @@ -19,18 +19,18 @@ void sbc_init(void) tmp &= 0xfffffcff; writel(tmp, PC0CTRL);
-#if !defined(CONFIG_SPL_BUILD) - /* XECS0 : dummy */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS1 : boot memory (always boot swap = on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + /* + * SBCTRL0* does not need settings because PH1-sLD8 has no support for + * XECS0. The boot swap must be enabled to boot from the support card. + */ + + if (boot_is_swapped()) { + /* XECS1 : boot memory if boot swap is on */ + writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); + }
/* XECS4 : sub memory */ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); @@ -54,5 +54,5 @@ void sbc_init(void) sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */
/* dummy read to assure write process */ - readl(SG_PINCTRL(33)); + readl(SG_PINCTRL(0)); }