Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Reviewed-by: Patrice Chotard patrice.chotard@st.com ---
(no changes since v1)
drivers/video/stm32/stm32_dsi.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/video/stm32/stm32_dsi.c b/drivers/video/stm32/stm32_dsi.c index 9d5abacc2b..dcec0edafc 100644 --- a/drivers/video/stm32/stm32_dsi.c +++ b/drivers/video/stm32/stm32_dsi.c @@ -8,6 +8,8 @@ * drivers/gpu/drm/stm/dw_mipi_dsi-stm.c. */
+#define LOG_CATEGORY UCLASS_VIDEO_BRIDGE + #include <common.h> #include <clk.h> #include <dm.h> @@ -133,7 +135,7 @@ static enum dsi_color dsi_color_from_mipi(u32 fmt) case MIPI_DSI_FMT_RGB565: return DSI_RGB565_CONF1; default: - pr_err("MIPI color invalid, so we use rgb888\n"); + log_err("MIPI color invalid, so we use rgb888\n"); } return DSI_RGB888; } @@ -213,14 +215,14 @@ static int dsi_phy_init(void *priv_data) u32 val; int ret;
- debug("Initialize DSI physical layer\n"); + dev_dbg(dev, "Initialize DSI physical layer\n");
/* Enable the regulator */ dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN); ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS, TIMEOUT_US); if (ret) { - debug("!TIMEOUT! waiting REGU\n"); + dev_dbg(dev, "!TIMEOUT! waiting REGU\n"); return ret; }
@@ -229,7 +231,7 @@ static int dsi_phy_init(void *priv_data) ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS, TIMEOUT_US); if (ret) { - debug("!TIMEOUT! waiting PLL\n"); + dev_dbg(dev, "!TIMEOUT! waiting PLL\n"); return ret; }
@@ -242,8 +244,8 @@ static void dsi_phy_post_set_mode(void *priv_data, unsigned long mode_flags) struct udevice *dev = device->dev; struct stm32_dsi_priv *dsi = dev_get_priv(dev);
- debug("Set mode %p enable %ld\n", dsi, - mode_flags & MIPI_DSI_MODE_VIDEO); + dev_dbg(dev, "Set mode %p enable %ld\n", dsi, + mode_flags & MIPI_DSI_MODE_VIDEO);
if (!dsi) return; @@ -325,8 +327,8 @@ static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings,
*lane_mbps = pll_out_khz / 1000;
- debug("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", - pll_in_khz, pll_out_khz, *lane_mbps); + dev_dbg(dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", + pll_in_khz, pll_out_khz, *lane_mbps);
return 0; }