On 11:26 Sun 03 May , Remy Bohmer wrote:
Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file.
It also removes a build warning for the at91sam9261ek board: 'dm9000x.c:545: warning: 'read_srom_word' defined but not used'
And it repaires the trizepsiv board build which was broken around the same routines
please put Stelian in Cc
Signed-off-by: Remy Bohmer linux@bohmer.net
board/trizepsiv/eeprom.c | 14 +++++++------- drivers/net/dm9000x.c | 16 ++++++++-------- include/configs/at91sam9261ek.h | 1 + include/dm9000.h | 11 +++++++++++ 4 files changed, 27 insertions(+), 15 deletions(-) create mode 100644 include/dm9000.h
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index 63f1c6c..9fa7aef 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -23,17 +23,17 @@
#include <common.h> #include <command.h>
@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
/* Set Node address */ if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { -#if !defined(CONFIG_AT91SAM9261EK) +#if !defined(CONFIG_DM9000_NO_SROM_AVAIL)
CONFIG_DM9000_NO_SROM will be shorter and the same
for (i = 0; i < 3; i++)
read_srom_word(i, enetaddr + 2 * i);
dm9000_read_srom_word(i, enetaddr + 2 * i);#endif
diff --git a/include/dm9000.h b/include/dm9000.h new file mode 100644 index 0000000..d59919b --- /dev/null +++ b/include/dm9000.h
Ben what do you think to do as usb have a dir to store all net header include/net/
@@ -0,0 +1,11 @@
Copyrigth?
+#ifndef __DM9000_H__ +#define __DM9000_H__
Best Regards, J.