When creating an entry, check for an expanded version of that entry, then use it instead. This allows, for example use of:
u-boot { };
instead of having to write out in full:
u-boot { type = "section";
u-boot-nodtb { };
u-boot-dtb { }; };
Add an implementaion of this and associated documentation.
Signed-off-by: Simon Glass sjg@chromium.org ---
tools/binman/README | 77 ++++++++++ tools/binman/README.entries | 96 +++++++++++- tools/binman/etype/blob_phase.py | 51 +++++++ tools/binman/etype/u_boot.py | 8 +- tools/binman/etype/u_boot_expanded.py | 24 +++ tools/binman/etype/u_boot_nodtb.py | 4 +- tools/binman/etype/u_boot_spl.py | 3 + tools/binman/etype/u_boot_spl_expanded.py | 45 ++++++ tools/binman/etype/u_boot_spl_nodtb.py | 5 +- tools/binman/etype/u_boot_tpl.py | 3 + tools/binman/etype/u_boot_tpl_expanded.py | 45 ++++++ tools/binman/etype/u_boot_tpl_nodtb.py | 5 +- tools/binman/ftest.py | 174 ++++++++++++++++++++++ tools/binman/state.py | 19 ++- tools/binman/test/194_fdt_incl.dts | 17 +++ tools/binman/test/195_fdt_incl_tpl.dts | 13 ++ 16 files changed, 571 insertions(+), 18 deletions(-) create mode 100644 tools/binman/etype/blob_phase.py create mode 100644 tools/binman/etype/u_boot_expanded.py create mode 100644 tools/binman/etype/u_boot_spl_expanded.py create mode 100644 tools/binman/etype/u_boot_tpl_expanded.py create mode 100644 tools/binman/test/194_fdt_incl.dts create mode 100644 tools/binman/test/195_fdt_incl_tpl.dts
diff --git a/tools/binman/README b/tools/binman/README index 45f0a0c2cd3..1de703cc653 100644 --- a/tools/binman/README +++ b/tools/binman/README @@ -840,6 +840,83 @@ of the image) can be used to point to the FDT map. See fdtmap and image-header entries for more information.
+Expanded entries +---------------- + +Binman automatically replaces 'u-boot' with an expanded version of that, i.e. +'u-boot-expanded'. This means that when you write: + + u-boot { + }; + +you actually get: + + u-boot { + type = "u-boot-expanded'; + }; + +which in turn expands to: + + u-boot { + type = "section"; + + u-boot-nodtb { + }; + + u-boot-dtb { + }; + }; + +U-Boot's various phase binaries actually comprise two or three pieces. +For example, u-boot.bin has the executable followed by a devicetree. + +With binman we want to be able to update that devicetree with full image +information so that it is accessible to the executable. This is tricky +if it is not clear where the devicetree starts. + +The above feature ensures that the devicetree is clearly separated from the +U-Boot executable and can be updated separately by binman as needed. It can be +disabled with the --no-expanded flag if required. + +The same applies for u-boot-spl and u-boot-spl. In those cases, the expansion +includes the BSS padding, so for example: + + spl { + type = "u-boot-spl" + }; + +you actually get: + + spl { + type = "u-boot-expanded'; + }; + +which in turn expands to: + + spl { + type = "section"; + + u-boot-spl-nodtb { + }; + + u-boot-spl-bss-pad { + }; + + u-boot-spl-dtb { + }; + }; + + +Of course we should not expand SPL if it has no devicetree. Also if the BSS +padding is not needed (because BSS is in RAM as with CONFIG_SPL_SEPARATE_BSS), +the 'u-boot-spl-bss-pad' subnode should not be created. The use of the expaned +entry type is controlled by the UseExpanded() method. In the SPL case it checks +the 'spl-dtb' entry arg, which is 'y' or '1' if SPL has a devicetree. + +For the BSS case, a 'spl-bss-pad' entry arg controls whether it is present. All +entry args are provided by the U-Boot Makefile. + + Compression -----------
diff --git a/tools/binman/README.entries b/tools/binman/README.entries index cd15073e6df..b5032381c7f 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -87,6 +87,15 @@ See cros_ec_rw for an example of this.
+Entry: blob-phase: Section that holds a phase binary +---------------------------------------------------- + +This is a base class that should not normally be used directly. It is used +when converting a 'u-boot' entry automatically into a 'u-boot-expanded' +entry; similarly for SPL. + + + Entry: cbfs: Entry containing a Coreboot Filesystem (CBFS) ----------------------------------------------------------
@@ -840,8 +849,7 @@ Properties / Entry arguments:
This is the U-Boot binary, containing relocation information to allow it to relocate itself at runtime. The binary typically includes a device tree -blob at the end of it. Use u-boot-nodtb if you want to package the device -tree separately. +blob at the end of it.
U-Boot can access binman symbols at runtime. See:
@@ -849,6 +857,9 @@ U-Boot can access binman symbols at runtime. See:
in the binman README for more information.
+Note that this entry is automatically replaced with u-boot-expanded unless +--no-expanded is used. +
Entry: u-boot-dtb: U-Boot device tree @@ -902,6 +913,21 @@ Properties / Entry arguments:
+Entry: u-boot-expanded: U-Boot flat binary broken out into its component parts +------------------------------------------------------------------------------ + +This is a section containing the U-Boot binary and a devicetree. Using this +entry type automatically creates this section, with the following entries +in it: + + u-boot-nodtb + u-boot-dtb + +Having the devicetree separate allows binman to update it in the final +image, so that the entries positions are provided to the running U-Boot. + + + Entry: u-boot-img: U-Boot legacy image --------------------------------------
@@ -925,8 +951,8 @@ Properties / Entry arguments: This is the U-Boot binary, containing relocation information to allow it to relocate itself at runtime. It does not include a device tree blob at the end of it so normally cannot work without it. You can add a u-boot-dtb -entry after this one, or use a u-boot entry instead (which contains both -U-Boot and the device tree). +entry after this one, or use a u-boot entry instead, normally expands to a +section containing u-boot and u-boot-dtb
@@ -952,6 +978,9 @@ in the binman README for more information. The ELF file 'spl/u-boot-spl' must also be available for this to work, since binman uses that to look up symbols to write into the SPL binary.
+Note that this entry is automatically replaced with u-boot-spl-expanded +unless --no-expanded is used. +
Entry: u-boot-spl-bss-pad: U-Boot SPL binary padded with a BSS region @@ -999,6 +1028,29 @@ be relocated to any address for execution.
+Entry: u-boot-spl-expanded: U-Boot SPL flat binary broken out into its component parts +-------------------------------------------------------------------------------------- + +Properties / Entry arguments: + - spl-dtb: Controls whether this entry is selected (set to 'y' or '1' to + select) + +This is a section containing the U-Boot binary, BSS padding if needed and a +devicetree. Using this entry type automatically creates this section, with +the following entries in it: + + u-boot-spl-nodtb + u-boot-spl-bss-pad + u-boot-dtb + +Having the devicetree separate allows binman to update it in the final +image, so that the entries positions are provided to the running U-Boot. + +This entry is selected based on the value of the 'spl-dtb' entryarg. If +this is non-empty (and not 'n' or '0') then this expanded entry is selected. + + + Entry: u-boot-spl-nodtb: SPL binary without device tree appended ----------------------------------------------------------------
@@ -1008,8 +1060,9 @@ Properties / Entry arguments: This is the U-Boot SPL binary, It does not include a device tree blob at the end of it so may not be able to work without it, assuming SPL needs a device tree to operate on your platform. You can add a u-boot-spl-dtb -entry after this one, or use a u-boot-spl entry instead (which contains -both SPL and the device tree). +entry after this one, or use a u-boot-spl entry instead' which normally +expands to a section containing u-boot-spl-dtb, u-boot-spl-bss-pad and +u-boot-spl-dtb
@@ -1045,6 +1098,9 @@ in the binman README for more information. The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since binman uses that to look up symbols to write into the TPL binary.
+Note that this entry is automatically replaced with u-boot-tpl-expanded +unless --no-expanded is used. +
Entry: u-boot-tpl-bss-pad: U-Boot TPL binary padded with a BSS region @@ -1102,6 +1158,29 @@ be relocated to any address for execution.
+Entry: u-boot-tpl-expanded: U-Boot TPL flat binary broken out into its component parts +-------------------------------------------------------------------------------------- + +Properties / Entry arguments: + - tpl-dtb: Controls whether this entry is selected (set to 'y' or '1' to + select) + +This is a section containing the U-Boot binary, BSS padding if needed and a +devicetree. Using this entry type automatically creates this section, with +the following entries in it: + + u-boot-tpl-nodtb + u-boot-tpl-bss-pad + u-boot-dtb + +Having the devicetree separate allows binman to update it in the final +image, so that the entries positions are provided to the running U-Boot. + +This entry is selected based on the value of the 'tpl-dtb' entryarg. If +this is non-empty (and not 'n' or '0') then this expanded entry is selected. + + + Entry: u-boot-tpl-nodtb: TPL binary without device tree appended ----------------------------------------------------------------
@@ -1111,8 +1190,9 @@ Properties / Entry arguments: This is the U-Boot TPL binary, It does not include a device tree blob at the end of it so may not be able to work without it, assuming TPL needs a device tree to operate on your platform. You can add a u-boot-tpl-dtb -entry after this one, or use a u-boot-tpl entry instead (which contains -both TPL and the device tree). +entry after this one, or use a u-boot-tpl entry instead, which normally +expands to a section containing u-boot-tpl-dtb, u-boot-tpl-bss-pad and +u-boot-tpl-dtb
diff --git a/tools/binman/etype/blob_phase.py b/tools/binman/etype/blob_phase.py new file mode 100644 index 00000000000..54ca54c50c1 --- /dev/null +++ b/tools/binman/etype/blob_phase.py @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass sjg@chromium.org +# +# Entry-type base class for U-Boot or SPL binary with devicetree +# + +from binman.etype.section import Entry_section + +class Entry_blob_phase(Entry_section): + """Section that holds a phase binary + + This is a base class that should not normally be used directly. It is used + when converting a 'u-boot' entry automatically into a 'u-boot-expanded' + entry; similarly for SPL. + """ + def __init__(self, section, etype, node, root_fname, dtb_file, bss_pad): + """Set up a new blob for a phase + + This holds an executable for a U-Boot phase, optional BSS padding and + a devicetree + + Args: + section: entry_Section object for this entry's parent + etype: Type of object + node: Node defining this entry + root_fname: Root filename for the binary ('u-boot', + 'spl/u-boot-spl', etc.) + dtb_file: Name of devicetree file ('u-boot.dtb', u-boot-spl.dtb', + etc.) + bss_pad: True to add BSS padding before the devicetree + """ + # Put this here to allow entry-docs and help to work without libfdt + global state + from binman import state + + super().__init__(section, etype, node) + self.root_fname = root_fname + self.dtb_file = dtb_file + self.bss_pad = bss_pad + + def ExpandEntries(self): + """Create the subnodes""" + names = [self.root_fname + '-nodtb', self.root_fname + '-dtb'] + if self.bss_pad: + names.insert(1, self.root_fname + '-bss-pad') + for name in names: + subnode = state.AddSubnode(self._node, name) + + # Read entries again, now that we have some + self._ReadEntries() diff --git a/tools/binman/etype/u_boot.py b/tools/binman/etype/u_boot.py index de783b26772..d2eaba6d4aa 100644 --- a/tools/binman/etype/u_boot.py +++ b/tools/binman/etype/u_boot.py @@ -2,7 +2,7 @@ # Copyright (c) 2016 Google, Inc # Written by Simon Glass sjg@chromium.org # -# Entry-type module for U-Boot binary +# Entry-type module for the expanded U-Boot binary #
from binman.entry import Entry @@ -16,14 +16,16 @@ class Entry_u_boot(Entry_blob):
This is the U-Boot binary, containing relocation information to allow it to relocate itself at runtime. The binary typically includes a device tree - blob at the end of it. Use u-boot-nodtb if you want to package the device - tree separately. + blob at the end of it.
U-Boot can access binman symbols at runtime. See:
'Access to binman entry offsets at run time (fdt)'
in the binman README for more information. + + Note that this entry is automatically replaced with u-boot-expanded unless + --no-expanded is used. """ def __init__(self, section, etype, node): super().__init__(section, etype, node) diff --git a/tools/binman/etype/u_boot_expanded.py b/tools/binman/etype/u_boot_expanded.py new file mode 100644 index 00000000000..8797824c9f0 --- /dev/null +++ b/tools/binman/etype/u_boot_expanded.py @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass sjg@chromium.org +# +# Entry-type module for U-Boot binary +# + +from binman.etype.blob_phase import Entry_blob_phase + +class Entry_u_boot_expanded(Entry_blob_phase): + """U-Boot flat binary broken out into its component parts + + This is a section containing the U-Boot binary and a devicetree. Using this + entry type automatically creates this section, with the following entries + in it: + + u-boot-nodtb + u-boot-dtb + + Having the devicetree separate allows binman to update it in the final + image, so that the entries positions are provided to the running U-Boot. + """ + def __init__(self, section, etype, node): + super().__init__(section, etype, node, 'u-boot', 'u-boot-dtb', False) diff --git a/tools/binman/etype/u_boot_nodtb.py b/tools/binman/etype/u_boot_nodtb.py index 289b24fa6c6..347ba7dc697 100644 --- a/tools/binman/etype/u_boot_nodtb.py +++ b/tools/binman/etype/u_boot_nodtb.py @@ -17,8 +17,8 @@ class Entry_u_boot_nodtb(Entry_blob): This is the U-Boot binary, containing relocation information to allow it to relocate itself at runtime. It does not include a device tree blob at the end of it so normally cannot work without it. You can add a u-boot-dtb - entry after this one, or use a u-boot entry instead (which contains both - U-Boot and the device tree). + entry after this one, or use a u-boot entry instead, normally expands to a + section containing u-boot and u-boot-dtb """ def __init__(self, section, etype, node): super().__init__(section, etype, node) diff --git a/tools/binman/etype/u_boot_spl.py b/tools/binman/etype/u_boot_spl.py index d66e46140be..1c39f982519 100644 --- a/tools/binman/etype/u_boot_spl.py +++ b/tools/binman/etype/u_boot_spl.py @@ -30,6 +30,9 @@ class Entry_u_boot_spl(Entry_blob):
The ELF file 'spl/u-boot-spl' must also be available for this to work, since binman uses that to look up symbols to write into the SPL binary. + + Note that this entry is automatically replaced with u-boot-spl-expanded + unless --no-expanded is used. """ def __init__(self, section, etype, node): super().__init__(section, etype, node) diff --git a/tools/binman/etype/u_boot_spl_expanded.py b/tools/binman/etype/u_boot_spl_expanded.py new file mode 100644 index 00000000000..8e138e6a624 --- /dev/null +++ b/tools/binman/etype/u_boot_spl_expanded.py @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass sjg@chromium.org +# +# Entry-type module for expanded U-Boot SPL binary +# + +from patman import tout + +from binman import state +from binman.etype.blob_phase import Entry_blob_phase + +class Entry_u_boot_spl_expanded(Entry_blob_phase): + """U-Boot SPL flat binary broken out into its component parts + + Properties / Entry arguments: + - spl-dtb: Controls whether this entry is selected (set to 'y' or '1' to + select) + + This is a section containing the U-Boot binary, BSS padding if needed and a + devicetree. Using this entry type automatically creates this section, with + the following entries in it: + + u-boot-spl-nodtb + u-boot-spl-bss-pad + u-boot-dtb + + Having the devicetree separate allows binman to update it in the final + image, so that the entries positions are provided to the running U-Boot. + + This entry is selected based on the value of the 'spl-dtb' entryarg. If + this is non-empty (and not 'n' or '0') then this expanded entry is selected. + """ + def __init__(self, section, etype, node): + bss_pad = state.GetEntryArgBool('spl-bss-pad') + super().__init__(section, etype, node, 'u-boot-spl', 'u-boot-spl-dtb', + bss_pad) + + @classmethod + def UseExpanded(cls, node, etype, new_etype): + val = state.GetEntryArgBool('spl-dtb') + tout.DoOutput(tout.INFO if val else tout.DETAIL, + "Node '%s': etype '%s': %s %sselected" % + (node.path, etype, new_etype, '' if val else 'not ')) + return val diff --git a/tools/binman/etype/u_boot_spl_nodtb.py b/tools/binman/etype/u_boot_spl_nodtb.py index 41d75054910..f9290ef307f 100644 --- a/tools/binman/etype/u_boot_spl_nodtb.py +++ b/tools/binman/etype/u_boot_spl_nodtb.py @@ -17,8 +17,9 @@ class Entry_u_boot_spl_nodtb(Entry_blob): This is the U-Boot SPL binary, It does not include a device tree blob at the end of it so may not be able to work without it, assuming SPL needs a device tree to operate on your platform. You can add a u-boot-spl-dtb - entry after this one, or use a u-boot-spl entry instead (which contains - both SPL and the device tree). + entry after this one, or use a u-boot-spl entry instead' which normally + expands to a section containing u-boot-spl-dtb, u-boot-spl-bss-pad and + u-boot-spl-dtb """ def __init__(self, section, etype, node): super().__init__(section, etype, node) diff --git a/tools/binman/etype/u_boot_tpl.py b/tools/binman/etype/u_boot_tpl.py index 02287ab3275..95d9bd6b20e 100644 --- a/tools/binman/etype/u_boot_tpl.py +++ b/tools/binman/etype/u_boot_tpl.py @@ -30,6 +30,9 @@ class Entry_u_boot_tpl(Entry_blob):
The ELF file 'tpl/u-boot-tpl' must also be available for this to work, since binman uses that to look up symbols to write into the TPL binary. + + Note that this entry is automatically replaced with u-boot-tpl-expanded + unless --no-expanded is used. """ def __init__(self, section, etype, node): super().__init__(section, etype, node) diff --git a/tools/binman/etype/u_boot_tpl_expanded.py b/tools/binman/etype/u_boot_tpl_expanded.py new file mode 100644 index 00000000000..15cdac46556 --- /dev/null +++ b/tools/binman/etype/u_boot_tpl_expanded.py @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright 2021 Google LLC +# Written by Simon Glass sjg@chromium.org +# +# Entry-type module for expanded U-Boot TPL binary +# + +from patman import tout + +from binman import state +from binman.etype.blob_phase import Entry_blob_phase + +class Entry_u_boot_tpl_expanded(Entry_blob_phase): + """U-Boot TPL flat binary broken out into its component parts + + Properties / Entry arguments: + - tpl-dtb: Controls whether this entry is selected (set to 'y' or '1' to + select) + + This is a section containing the U-Boot binary, BSS padding if needed and a + devicetree. Using this entry type automatically creates this section, with + the following entries in it: + + u-boot-tpl-nodtb + u-boot-tpl-bss-pad + u-boot-dtb + + Having the devicetree separate allows binman to update it in the final + image, so that the entries positions are provided to the running U-Boot. + + This entry is selected based on the value of the 'tpl-dtb' entryarg. If + this is non-empty (and not 'n' or '0') then this expanded entry is selected. + """ + def __init__(self, section, etype, node): + bss_pad = state.GetEntryArgBool('tpl-bss-pad') + super().__init__(section, etype, node, 'u-boot-tpl', 'u-boot-tpl-dtb', + bss_pad) + + @classmethod + def UseExpanded(cls, node, etype, new_etype): + val = state.GetEntryArgBool('tpl-dtb') + tout.DoOutput(tout.INFO if val else tout.DETAIL, + "Node '%s': etype '%s': %s %sselected" % + (node.path, etype, new_etype, '' if val else 'not ')) + return val diff --git a/tools/binman/etype/u_boot_tpl_nodtb.py b/tools/binman/etype/u_boot_tpl_nodtb.py index eaeebcadf77..07edbc5efaf 100644 --- a/tools/binman/etype/u_boot_tpl_nodtb.py +++ b/tools/binman/etype/u_boot_tpl_nodtb.py @@ -17,8 +17,9 @@ class Entry_u_boot_tpl_nodtb(Entry_blob): This is the U-Boot TPL binary, It does not include a device tree blob at the end of it so may not be able to work without it, assuming TPL needs a device tree to operate on your platform. You can add a u-boot-tpl-dtb - entry after this one, or use a u-boot-tpl entry instead (which contains - both TPL and the device tree). + entry after this one, or use a u-boot-tpl entry instead, which normally + expands to a section containing u-boot-tpl-dtb, u-boot-tpl-bss-pad and + u-boot-tpl-dtb """ def __init__(self, section, etype, node): super().__init__(section, etype, node) diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 2a0e0460daa..2638408246f 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -4274,6 +4274,180 @@ class TestFunctional(unittest.TestCase): self.assertIn('Expected __bss_size symbol in tpl/u-boot-tpl', str(e.exception))
+ def checkDtbSizes(self, data, pad_len, start): + """Check the size arguments in a dtb embedded in an image + + Args: + data: The image data + pad_len: Length of the pad section in the image, in bytes + start: Start offset of the devicetree to examine, within the image + + Returns: + Size of the devicetree in bytes + """ + dtb_data = data[start:] + dtb = fdt.Fdt.FromData(dtb_data) + fdt_size = dtb.GetFdtObj().totalsize() + dtb.Scan() + props = self._GetPropTree(dtb, 'size') + self.assertEqual({ + 'size': len(data), + 'u-boot-spl/u-boot-spl-bss-pad:size': pad_len, + 'u-boot-spl/u-boot-spl-dtb:size': 781, + 'u-boot-spl/u-boot-spl-nodtb:size': len(U_BOOT_SPL_NODTB_DATA), + 'u-boot-spl:size': 840, + 'u-boot-tpl:size': len(U_BOOT_TPL_DATA), + 'u-boot/u-boot-dtb:size': 781, + 'u-boot/u-boot-nodtb:size': len(U_BOOT_NODTB_DATA), + 'u-boot:size': 827, + }, props) + return fdt_size + + def testExpanded(self): + """Test that an expanded entry type is selected when needed""" + self._SetupSplElf() + self._SetupTplElf() + + # SPL has a devicetree, TPL does not + entry_args = { + 'spl-dtb': '1', + 'spl-bss-pad': 'y', + 'tpl-dtb': '', + } + self._DoReadFileDtb('194_fdt_incl.dts', use_expanded=True, + entry_args=entry_args) + image = control.images['image'] + entries = image.GetEntries() + self.assertEqual(3, len(entries)) + + # First, u-boot, which should be expanded into u-boot-nodtb and dtb + self.assertIn('u-boot', entries) + entry = entries['u-boot'] + self.assertEqual('u-boot-expanded', entry.etype) + subent = entry.GetEntries() + self.assertEqual(2, len(subent)) + self.assertIn('u-boot-nodtb', subent) + self.assertIn('u-boot-dtb', subent) + + # Second, u-boot-spl, which should be expanded into three parts + self.assertIn('u-boot-spl', entries) + entry = entries['u-boot-spl'] + self.assertEqual('u-boot-spl-expanded', entry.etype) + subent = entry.GetEntries() + self.assertEqual(3, len(subent)) + self.assertIn('u-boot-spl-nodtb', subent) + self.assertIn('u-boot-spl-bss-pad', subent) + self.assertIn('u-boot-spl-dtb', subent) + + # Third, u-boot-tpl, which should be not be expanded, since TPL has no + # devicetree + self.assertIn('u-boot-tpl', entries) + entry = entries['u-boot-tpl'] + self.assertEqual('u-boot-tpl', entry.etype) + self.assertEqual(None, entry.GetEntries()) + + def testExpandedTpl(self): + """Test that an expanded entry type is selected for TPL when needed""" + self._SetupTplElf() + + entry_args = { + 'tpl-bss-pad': 'y', + 'tpl-dtb': 'y', + } + self._DoReadFileDtb('195_fdt_incl_tpl.dts', use_expanded=True, + entry_args=entry_args) + image = control.images['image'] + entries = image.GetEntries() + self.assertEqual(1, len(entries)) + + # We only have u-boot-tpl, which be expanded + self.assertIn('u-boot-tpl', entries) + entry = entries['u-boot-tpl'] + self.assertEqual('u-boot-tpl-expanded', entry.etype) + subent = entry.GetEntries() + self.assertEqual(3, len(subent)) + self.assertIn('u-boot-tpl-nodtb', subent) + self.assertIn('u-boot-tpl-bss-pad', subent) + self.assertIn('u-boot-tpl-dtb', subent) + + def testExpandedNoPad(self): + """Test an expanded entry without BSS pad enabled""" + self._SetupSplElf() + self._SetupTplElf() + + # SPL has a devicetree, TPL does not + entry_args = { + 'spl-dtb': 'something', + 'spl-bss-pad': 'n', + 'tpl-dtb': '', + } + self._DoReadFileDtb('194_fdt_incl.dts', use_expanded=True, + entry_args=entry_args) + image = control.images['image'] + entries = image.GetEntries() + + # Just check u-boot-spl, which should be expanded into two parts + self.assertIn('u-boot-spl', entries) + entry = entries['u-boot-spl'] + self.assertEqual('u-boot-spl-expanded', entry.etype) + subent = entry.GetEntries() + self.assertEqual(2, len(subent)) + self.assertIn('u-boot-spl-nodtb', subent) + self.assertIn('u-boot-spl-dtb', subent) + + def testExpandedTplNoPad(self): + """Test that an expanded entry type with padding disabled in TPL""" + self._SetupTplElf() + + entry_args = { + 'tpl-bss-pad': '', + 'tpl-dtb': 'y', + } + self._DoReadFileDtb('195_fdt_incl_tpl.dts', use_expanded=True, + entry_args=entry_args) + image = control.images['image'] + entries = image.GetEntries() + self.assertEqual(1, len(entries)) + + # We only have u-boot-tpl, which be expanded + self.assertIn('u-boot-tpl', entries) + entry = entries['u-boot-tpl'] + self.assertEqual('u-boot-tpl-expanded', entry.etype) + subent = entry.GetEntries() + self.assertEqual(2, len(subent)) + self.assertIn('u-boot-tpl-nodtb', subent) + self.assertIn('u-boot-tpl-dtb', subent) + + def testFdtInclude(self): + """Test that an Fdt is update within all binaries""" + self._SetupSplElf() + self._SetupTplElf() + + # SPL has a devicetree, TPL does not + self.maxDiff = None + entry_args = { + 'spl-dtb': '1', + 'spl-bss-pad': 'y', + 'tpl-dtb': '', + } + # Build the image. It includes two separate devicetree binaries, each + # with their own contents, but all contain the binman definition. + data = self._DoReadFileDtb( + '194_fdt_incl.dts', use_real_dtb=True, use_expanded=True, + update_dtb=True, entry_args=entry_args)[0] + pad_len = 10 + + # Check the U-Boot dtb + start = len(U_BOOT_NODTB_DATA) + fdt_size = self.checkDtbSizes(data, pad_len, start) + + # Now check SPL + start += fdt_size + len(U_BOOT_SPL_NODTB_DATA) + pad_len + fdt_size = self.checkDtbSizes(data, pad_len, start) + + # TPL has no devicetree + start += fdt_size + len(U_BOOT_TPL_DATA) + self.assertEqual(len(data), start)
if __name__ == "__main__": unittest.main() diff --git a/tools/binman/state.py b/tools/binman/state.py index bb3e36ea7af..ebfc7a02002 100644 --- a/tools/binman/state.py +++ b/tools/binman/state.py @@ -136,12 +136,16 @@ def SetEntryArgs(args): global entry_args
entry_args = {} + tout.Debug('Processing entry args:') if args: for arg in args: m = re.match('([^=]*)=(.*)', arg) if not m: raise ValueError("Invalid entry arguemnt '%s'" % arg) - entry_args[m.group(1)] = m.group(2) + name, value = m.groups() + tout.Debug(' %20s = %s' % (name, value)) + entry_args[name] = value + tout.Debug('Processing entry args done')
def GetEntryArg(name): """Get the value of an entry argument @@ -154,6 +158,19 @@ def GetEntryArg(name): """ return entry_args.get(name)
+def GetEntryArgBool(name): + """Get the value of an entry argument as a boolean + + Args: + name: Name of argument to retrieve + + Returns: + False if the entry argument is consider False (empty, '0' or 'n'), else + True + """ + val = GetEntryArg(name) + return val and val not in ['n', '0'] + def Prepare(images, dtb): """Get device tree files ready for use
diff --git a/tools/binman/test/194_fdt_incl.dts b/tools/binman/test/194_fdt_incl.dts new file mode 100644 index 00000000000..b14c8ff8f52 --- /dev/null +++ b/tools/binman/test/194_fdt_incl.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot { + }; + u-boot-spl { + }; + u-boot-tpl { + }; + }; +}; diff --git a/tools/binman/test/195_fdt_incl_tpl.dts b/tools/binman/test/195_fdt_incl_tpl.dts new file mode 100644 index 00000000000..3756ac4fc47 --- /dev/null +++ b/tools/binman/test/195_fdt_incl_tpl.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + u-boot-tpl { + }; + }; +};