This board is still a non-generic board.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/p2020ds/Kconfig | 12 - board/freescale/p2020ds/MAINTAINERS | 10 - board/freescale/p2020ds/Makefile | 12 - board/freescale/p2020ds/ddr.c | 129 ------- board/freescale/p2020ds/law.c | 20 - board/freescale/p2020ds/p2020ds.c | 263 ------------- board/freescale/p2020ds/tlb.c | 90 ----- configs/P2020DS_36BIT_defconfig | 4 - configs/P2020DS_DDR2_defconfig | 4 - configs/P2020DS_SDCARD_defconfig | 4 - configs/P2020DS_SPIFLASH_defconfig | 4 - configs/P2020DS_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/P2020DS.h | 751 ------------------------------------ 15 files changed, 1 insertion(+), 1310 deletions(-) delete mode 100644 board/freescale/p2020ds/Kconfig delete mode 100644 board/freescale/p2020ds/MAINTAINERS delete mode 100644 board/freescale/p2020ds/Makefile delete mode 100644 board/freescale/p2020ds/ddr.c delete mode 100644 board/freescale/p2020ds/law.c delete mode 100644 board/freescale/p2020ds/p2020ds.c delete mode 100644 board/freescale/p2020ds/tlb.c delete mode 100644 configs/P2020DS_36BIT_defconfig delete mode 100644 configs/P2020DS_DDR2_defconfig delete mode 100644 configs/P2020DS_SDCARD_defconfig delete mode 100644 configs/P2020DS_SPIFLASH_defconfig delete mode 100644 configs/P2020DS_defconfig delete mode 100644 include/configs/P2020DS.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index e643f91..adb5bd3 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -93,9 +93,6 @@ config TARGET_P1_P2_RDB_PC config TARGET_P1_TWR bool "Support p1_twr"
-config TARGET_P2020DS - bool "Support P2020DS" - config TARGET_P2041RDB bool "Support P2041RDB"
@@ -178,7 +175,6 @@ source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" -source "board/freescale/p2020ds/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig" source "board/freescale/t102xqds/Kconfig" diff --git a/board/freescale/p2020ds/Kconfig b/board/freescale/p2020ds/Kconfig deleted file mode 100644 index e527ec9..0000000 --- a/board/freescale/p2020ds/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P2020DS - -config SYS_BOARD - default "p2020ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P2020DS" - -endif diff --git a/board/freescale/p2020ds/MAINTAINERS b/board/freescale/p2020ds/MAINTAINERS deleted file mode 100644 index cb61fc5..0000000 --- a/board/freescale/p2020ds/MAINTAINERS +++ /dev/null @@ -1,10 +0,0 @@ -P2020DS BOARD -#M: - -S: Maintained -F: board/freescale/p2020ds/ -F: include/configs/P2020DS.h -F: configs/P2020DS_defconfig -F: configs/P2020DS_36BIT_defconfig -F: configs/P2020DS_DDR2_defconfig -F: configs/P2020DS_SDCARD_defconfig -F: configs/P2020DS_SPIFLASH_defconfig diff --git a/board/freescale/p2020ds/Makefile b/board/freescale/p2020ds/Makefile deleted file mode 100644 index ee00806..0000000 --- a/board/freescale/p2020ds/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p2020ds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c deleted file mode 100644 index debe70b..0000000 --- a/board/freescale/p2020ds/ddr.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; - u32 cpo; - u32 write_data_delay; - u32 force_2t; -}; - - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - * - * ranges for parameters: - * wr_data_delay = 0-6 - * clk adjust = 0-8 - * cpo 2-0x1E (30) - */ -static const struct board_specific_parameters dimm0[] = { - /* - * memory controller 0 - * num| hi| clk| cpo|wrdata|2T - * ranks| mhz|adjst| | delay| - */ -#ifdef CONFIG_SYS_FSL_DDR2 - {2, 549, 4, 0x1f, 2, 0}, - {2, 680, 4, 0x1f, 3, 0}, - {2, 850, 4, 0x1f, 4, 0}, - {1, 549, 4, 0x1f, 2, 0}, - {1, 680, 4, 0x1f, 3, 0}, - {1, 850, 4, 0x1f, 4, 0}, -#else - {2, 850, 6, 0x1f, 4, 0}, - {1, 850, 4, 0x1f, 4, 0}, -#endif - {} -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - int i; - - if (ctrl_num) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - /* - * set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in - * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If - * there are two dimms in the controller, set odt_rd_cfg to 3 and - * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. - */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 1; - } - - pbsp = dimm0; - - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - popts->twot_en = pbsp->force_2t; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found " - "for data rate %lu MT/s!\n" - "Trying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; - popts->twot_en = pbsp_highest->force_2t; - } else { - panic("DIMM is not supported by this board"); - } - -found: - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - popts->wrlvl_en = 1; - /* Write leveling override */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xa; - popts->wrlvl_start = 0x8; - /* Rtt and Rtt_WR override */ - popts->rtt_override = 1; - popts->rtt_override_value = DDR3_RTT_120_OHM; - popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ -} diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c deleted file mode 100644 index 9cd4da9..0000000 --- a/board/freescale/p2020ds/law.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c deleted file mode 100644 index 5d18e8d..0000000 --- a/board/freescale/p2020ds/p2020ds.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Copyright 2007-2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/io.h> -#include <asm/fsl_serdes.h> -#include <miiphy.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <fsl_mdio.h> -#include <tsec.h> -#include <asm/fsl_law.h> -#include <netdev.h> - -#include "../common/ngpixis.h" -#include "../common/sgmii_riser.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ -#ifdef CONFIG_MMC - ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); -#endif - - return 0; -} - -int checkboard(void) -{ - u8 sw; - - printf("Board: P2020DS Sys ID: 0x%02x, " - "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); - - sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); - sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; - - if (sw < 0x8) - /* The lower two bits are the actual vbank number */ - printf("vBank: %d\n", sw & 3); - else - puts("Promjet\n"); - - return 0; -} - -#if !defined(CONFIG_DDR_SPD) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ - -phys_size_t fixed_sdram(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - uint d_init; - - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; - ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL; - ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL; - ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1; - ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4; - ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5; - - if (!strcmp("performance", getenv("perf_mode"))) { - /* Performance Mode Values */ - - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF; - - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF; - } else { - /* Stable Mode Values */ - - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - - /* ECC will be assumed in stable mode */ - ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; - ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; - ddr->err_sbe = CONFIG_SYS_DDR_SBE; - - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - } - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) - udelay(1000); - debug("DDR: memory initialized\n\n"); - asm("sync; isync"); - udelay(500); -#endif - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE * 1024 * 1024, - LAW_TRGT_IF_DDR) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - }; - - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} - -#endif - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - return 0; -} - -#ifdef CONFIG_TSEC_ENET -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - if (is_serdes_configured(SGMII_TSEC2)) { - puts("eTSEC2 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - if (is_serdes_configured(SGMII_TSEC3)) { - puts("eTSEC3 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; -} - num++; -#endif - - if (!num) { - printf("No TSECs initialized\n"); - - return 0; - } - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_init(tsec_info, num); -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); - - return pci_eth_init(bis); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fdt_fixup_dr_usb(blob, bd); -#endif - - FT_FSL_PCI_SETUP; - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_fdt_fixup(blob); -#endif - - return 0; -} -#endif diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c deleted file mode 100644 index 02da6e8..0000000 --- a/board/freescale/p2020ds/tlb.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright 2008-2011 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* W**G* - Flash/promjet, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), - - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_1M, 1), - - SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_4K, 1), - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 9, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_256K, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/P2020DS_36BIT_defconfig b/configs/P2020DS_36BIT_defconfig deleted file mode 100644 index 359c446..0000000 --- a/configs/P2020DS_36BIT_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="36BIT" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y diff --git a/configs/P2020DS_DDR2_defconfig b/configs/P2020DS_DDR2_defconfig deleted file mode 100644 index 00b6731..0000000 --- a/configs/P2020DS_DDR2_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="DDR2" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y diff --git a/configs/P2020DS_SDCARD_defconfig b/configs/P2020DS_SDCARD_defconfig deleted file mode 100644 index 89aef3a..0000000 --- a/configs/P2020DS_SDCARD_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y diff --git a/configs/P2020DS_SPIFLASH_defconfig b/configs/P2020DS_SPIFLASH_defconfig deleted file mode 100644 index 503328c..0000000 --- a/configs/P2020DS_SPIFLASH_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y diff --git a/configs/P2020DS_defconfig b/configs/P2020DS_defconfig deleted file mode 100644 index f2ac6d9..0000000 --- a/configs/P2020DS_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020DS=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 5733c5a..719b970 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020DS powerpc mpc85xx - - P2020COME powerpc mpc85xx - - Ira W. Snyder iws@ovro.caltech.edu P2020RDB powerpc mpc85xx - - Poonam Aggrwal poonam.aggrwal@freescale.com P2010RDB powerpc mpc85xx - - diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h deleted file mode 100644 index 820b633..0000000 --- a/include/configs/P2020DS.h +++ /dev/null @@ -1,751 +0,0 @@ -/* - * Copyright 2007-2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * p2020ds board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "../board/freescale/common/ics307_clk.h" - -#ifdef CONFIG_36BIT -#define CONFIG_PHYS_64BIT -#endif - -#ifdef CONFIG_SDCARD -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f40000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f40000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_P2020 1 -#define CONFIG_P2020DS 1 -#define CONFIG_MP 1 /* support multiple processors */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff40000 -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ - -#define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ -#define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ -#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ -#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -/* - * Config the L2 Cache - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_VERY_BIG_RAM -#ifdef CONFIG_DDR2 -#define CONFIG_SYS_FSL_DDR2 -#else -#define CONFIG_SYS_FSL_DDR3 1 -#endif - -/* ECC will be enabled based on perf_mode environment variable */ -/* #define CONFIG_DDR_ECC */ - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define CONFIG_DDR_SPD -#define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD EEPROM located on I2C bus 0 */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1GB */ - -/* Default settings for "stable" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x00330804 -#define CONFIG_SYS_DDR_TIMING_1 0x6f6b4846 -#define CONFIG_SYS_DDR_TIMING_2 0x0fa890d4 -#define CONFIG_SYS_DDR_MODE_1 0x00421422 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x61800100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x02000000 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x03402400 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8655A608 -#define CONFIG_SYS_DDR_CONTROL 0xE7000000 /* Type = DDR3: ECC enabled, No Interleaving */ -#define CONFIG_SYS_DDR_CONTROL2 0x24400011 -#define CONFIG_SYS_DDR_CDR1 0x00040000 -#define CONFIG_SYS_DDR_CDR2 0x00000000 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00010000 - -/* Settings that differ for "performance" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS_PERF 0x0000007F /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_BNDS_PERF 0x00000000 /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014202 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x5d5b4543 -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x0fa890ce -#define CONFIG_SYS_DDR_CONTROL_PERF 0xC7004000 /* Type = DDR3: ECC disabled, cs0-cs1 interleaving */ - -/* - * The following set of values were tested for DDR2 - * with a DDR3 to DDR2 interposer - * -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x3935d322 -#define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 -#define CONFIG_SYS_DDR_MODE_1 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x06180100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 -#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xC3008000 -#define CONFIG_SYS_DDR_CONTROL2 0x04400010 - * - */ - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable - * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - * - * Localbus cacheable (TBD) - * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable - * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 - -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ - -#define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ - -#ifdef CONFIG_FSL_NGPIXIS -#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ -#ifdef CONFIG_PHYS_64BIT -#define PIXIS_BASE_PHYS 0xfffdf0000ull -#else -#define PIXIS_BASE_PHYS PIXIS_BASE -#endif - -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - -#define PIXIS_LBMAP_SWITCH 7 -#define PIXIS_LBMAP_MASK 0xf0 -#define PIXIS_LBMAP_SHIFT 4 -#define PIXIS_LBMAP_ALTBANK 0x20 -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ - CONFIG_SYS_NAND_BASE + 0x40000, \ - CONFIG_SYS_NAND_BASE + 0x80000,\ - CONFIG_SYS_NAND_BASE + 0xC0000} -#define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND 1 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ - | OR_FCM_PGS /* Large Page*/ \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Pass open firmware flat tree - */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 0 - -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI - -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION - -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 3, Slot 1, tgtid 3, Base address b000 */ -#define CONFIG_SYS_PCIE3_NAME "Slot 1" -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 -#endif -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull -#else -#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 -#endif -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* controller 2, direct to uli, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_NAME "ULI" -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 -#endif -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, Slot 2, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "Slot 2" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#endif -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 -#endif -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#if defined(CONFIG_PCI) - -/*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT - -/* video */ -#undef CONFIG_VIDEO - -#if defined(CONFIG_VIDEO) -#define CONFIG_BIOSEMU -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_ATI_RADEON_FB -#define CONFIG_VIDEO_LOGO -/*#define CONFIG_CONSOLE_CURSOR*/ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET -#endif - -/* SRIO1 uses the same window as PCIE2 mem window */ -#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 -#endif -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ - -/* SRIO2 uses the same window as PCIE1 mem window */ -#define CONFIG_SYS_SRIO2_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc0000000 -#endif -#define CONFIG_SYS_SRIO2_MEM_SIZE 0x20000000 /* 512M */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION -#define CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_LIBATA -#define CONFIG_SATA_ULI5288 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE -#endif /* SCSI */ - -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define CONFIG_FSL_SGMII_RISER 1 -#define SGMII_RISER_PHY_OFFSET 0x1b - -#ifdef CONFIG_FSL_SGMII_RISER -#define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ -#endif - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#if defined(CONFIG_SDCARD) -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_SPIFLASH) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#define CONFIG_CMD_SCSI -#define CONFIG_CMD_EXT2 -#endif - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif -#endif - -/* - * SDHC/MMC - */ -#define CONFIG_MMC - -#ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#endif - -#define CONFIG_IPADDR 192.168.1.254 - -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ -"perf_mode=performance\0" \ - "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=ulpi\0" \ -"netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ -"tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ -"satabootcmd=setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" \ -"consoledev=ttyS0\0" \ -"ramdiskaddr=2000000\0" \ -"ramdiskfile=p2020ds/ramdisk.uboot\0" \ -"fdtaddr=c00000\0" \ -"othbootargs=cache-sram-size=0x10000\0" \ -"fdtfile=p2020ds/p2020ds.dtb\0" \ -"bdev=sda3\0" \ -"partition=scsi 0:0\0" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "ext2load $partition $loadaddr $bootfile;" \ - "ext2load $partition $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */