Sync rk3399-pinebook-pro device tree from linux v6.8.
Add SF_DEFAULT_SPEED=10000000 and SPI_FLASH_SFDP_SUPPORT=y to improve support for booting from SPI flash.
Add CMD_POWEROFF=y to support poweroff using cmdline and power on using the pwr button on the board.
Remove SPL_TINY_MEMSET=y to use full memset in SPL.
Signed-off-by: Jonas Karlman jonas@kwiboo.se --- arch/arm/dts/rk3399-pinebook-pro.dts | 24 +++++++----------------- configs/pinebook-pro-rk3399_defconfig | 6 ++++-- 2 files changed, 11 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts index d6b68d77d63a..054c6a4d1a45 100644 --- a/arch/arm/dts/rk3399-pinebook-pro.dts +++ b/arch/arm/dts/rk3399-pinebook-pro.dts @@ -50,19 +50,9 @@ pinctrl-0 = <&panel_en_pin>; power-supply = <&vcc3v3_panel>;
- ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_in_edp: endpoint@0 { - reg = <0>; - remote-endpoint = <&edp_out_panel>; - }; + port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; }; }; }; @@ -76,7 +66,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lidbtn_pin>;
- lid { + switch-lid { debounce-interval = <20>; gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>; label = "Lid"; @@ -92,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn_pin>;
- power { + key-power { debounce-interval = <20>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "Power"; @@ -675,7 +665,7 @@ i2c-scl-rising-time-ns = <168>; status = "okay";
- es8316: es8316@11 { + es8316: audio-codec@11 { compatible = "everest,es8316"; reg = <0x11>; clocks = <&cru SCLK_I2S_8CH_OUT>; @@ -943,7 +933,7 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - sd-uhs-sdr104; + sd-uhs-sdr50; vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig index dd8bc2b72cc3..8ac6ddd49dea 100644 --- a/configs/pinebook-pro-rk3399_defconfig +++ b/configs/pinebook-pro-rk3399_defconfig @@ -4,7 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro" @@ -36,6 +36,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -64,7 +65,9 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_SILICONKAISER=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_NVME_PCI=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y @@ -98,5 +101,4 @@ CONFIG_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y CONFIG_DISPLAY_ROCKCHIP_EDP=y -CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y