Commit c09d29057a and df120142f36 break kernel loading on rock2 board.
console output: Starting kernel ...
### ERROR ### Please RESET the board ###
This reverts commit c09d29057ab0b04db0857d319c6bff74de31b9c3.
Conflicts: arch/arm/cpu/armv7/cache_v7.c arch/arm/cpu/armv7/cache_v7_asm.S
Signed-off-by: Sandy Patterson apatterson@sightlogix.com ---
arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/cache_v7.c | 114 +++++++++++++++++++- arch/arm/cpu/armv7/cache_v7_asm.S | 154 --------------------------- arch/arm/mach-uniphier/arm32/lowlevel_init.S | 67 +++++++++++- 4 files changed, 180 insertions(+), 157 deletions(-) delete mode 100644 arch/arm/cpu/armv7/cache_v7_asm.S
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 0d4bfbc..9d20f17 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -7,7 +7,7 @@
extra-y := start.o
-obj-y += cache_v7.o cache_v7_asm.o +obj-y += cache_v7.o
obj-y += cpu.o cp15.o obj-y += syslib.o diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c index 52f1856..9fbabb4 100644 --- a/arch/arm/cpu/armv7/cache_v7.c +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -28,6 +28,118 @@ static u32 get_ccsidr(void) return ccsidr; }
+static u32 get_clidr(void) +{ + u32 clidr; + + /* Read current CP15 Cache Level ID Register */ + asm volatile ("mrc p15,1,%0,c0,c0,1" : "=r" (clidr)); + return clidr; +} + +static void v7_inval_dcache_level_setway(u32 level, u32 num_sets, + u32 num_ways, u32 way_shift, + u32 log2_line_len) +{ + int way, set; + u32 setway; + + /* + * For optimal assembly code: + * a. count down + * b. have bigger loop inside + */ + for (way = num_ways - 1; way >= 0 ; way--) { + for (set = num_sets - 1; set >= 0; set--) { + setway = (level << 1) | (set << log2_line_len) | + (way << way_shift); + /* Invalidate data/unified cache line by set/way */ + asm volatile (" mcr p15, 0, %0, c7, c6, 2" + : : "r" (setway)); + } + } + /* DSB to make sure the operation is complete */ + DSB; +} + +static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets, + u32 num_ways, u32 way_shift, + u32 log2_line_len) +{ + int way, set; + u32 setway; + + /* + * For optimal assembly code: + * a. count down + * b. have bigger loop inside + */ + for (way = num_ways - 1; way >= 0 ; way--) { + for (set = num_sets - 1; set >= 0; set--) { + setway = (level << 1) | (set << log2_line_len) | + (way << way_shift); + /* + * Clean & Invalidate data/unified + * cache line by set/way + */ + asm volatile (" mcr p15, 0, %0, c7, c14, 2" + : : "r" (setway)); + } + } + /* DSB to make sure the operation is complete */ + DSB; +} + +static void v7_maint_dcache_level_setway(u32 level, u32 operation) +{ + u32 ccsidr; + u32 num_sets, num_ways, log2_line_len, log2_num_ways; + u32 way_shift; + + set_csselr(level, ARMV7_CSSELR_IND_DATA_UNIFIED); + + ccsidr = get_ccsidr(); + + log2_line_len = ((ccsidr & CCSIDR_LINE_SIZE_MASK) >> + CCSIDR_LINE_SIZE_OFFSET) + 2; + /* Converting from words to bytes */ + log2_line_len += 2; + + num_ways = ((ccsidr & CCSIDR_ASSOCIATIVITY_MASK) >> + CCSIDR_ASSOCIATIVITY_OFFSET) + 1; + num_sets = ((ccsidr & CCSIDR_NUM_SETS_MASK) >> + CCSIDR_NUM_SETS_OFFSET) + 1; + /* + * According to ARMv7 ARM number of sets and number of ways need + * not be a power of 2 + */ + log2_num_ways = log_2_n_round_up(num_ways); + + way_shift = (32 - log2_num_ways); + if (operation == ARMV7_DCACHE_INVAL_ALL) { + v7_inval_dcache_level_setway(level, num_sets, num_ways, + way_shift, log2_line_len); + } else if (operation == ARMV7_DCACHE_CLEAN_INVAL_ALL) { + v7_clean_inval_dcache_level_setway(level, num_sets, num_ways, + way_shift, log2_line_len); + } +} + +static void v7_maint_dcache_all(u32 operation) +{ + u32 level, cache_type, level_start_bit = 0; + u32 clidr = get_clidr(); + + for (level = 0; level < 7; level++) { + cache_type = (clidr >> level_start_bit) & 0x7; + if ((cache_type == ARMV7_CLIDR_CTYPE_DATA_ONLY) || + (cache_type == ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA) || + (cache_type == ARMV7_CLIDR_CTYPE_UNIFIED)) + v7_maint_dcache_level_setway(level, operation); + level_start_bit += 3; + } +} + static void v7_dcache_clean_inval_range(u32 start, u32 stop, u32 line_len) { u32 mva; @@ -106,7 +218,7 @@ void invalidate_dcache_all(void) */ void flush_dcache_all(void) { - v7_flush_dcache_all(); + v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL);
v7_outer_cache_flush_all(); } diff --git a/arch/arm/cpu/armv7/cache_v7_asm.S b/arch/arm/cpu/armv7/cache_v7_asm.S deleted file mode 100644 index a433628..0000000 --- a/arch/arm/cpu/armv7/cache_v7_asm.S +++ /dev/null @@ -1,154 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <linux/linkage.h> -#include <linux/sizes.h> -#include <asm/system.h> - -#ifdef CONFIG_SYS_THUMB_BUILD -#define ARM(x...) -#define THUMB(x...) x -#else -#define ARM(x...) x -#define THUMB(x...) -#endif - -/* - * v7_flush_dcache_all() - * - * Flush the whole D-cache. - * - * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) - * - * Note: copied from arch/arm/mm/cache-v7.S of Linux 4.4 - */ -ENTRY(__v7_flush_dcache_all) - dmb @ ensure ordering with previous memory accesses - mrc p15, 1, r0, c0, c0, 1 @ read clidr - mov r3, r0, lsr #23 @ move LoC into position - ands r3, r3, #7 << 1 @ extract LoC*2 from clidr - beq finished @ if loc is 0, then no need to clean -start_flush_levels: - mov r10, #0 @ start clean at cache level 0 -flush_levels: - add r2, r10, r10, lsr #1 @ work out 3x current cache level - mov r1, r0, lsr r2 @ extract cache type bits from clidr - and r1, r1, #7 @ mask of the bits for current cache only - cmp r1, #2 @ see what cache we have at this level - blt skip @ skip if no cache, or just i-cache - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - isb @ isb to sych the new cssr&csidr - mrc p15, 1, r1, c0, c0, 0 @ read the new csidr - and r2, r1, #7 @ extract the length of the cache lines - add r2, r2, #4 @ add 4 (line length offset) - movw r4, #0x3ff - ands r4, r4, r1, lsr #3 @ find maximum number on the way size - clz r5, r4 @ find bit position of way size increment - movw r7, #0x7fff - ands r7, r7, r1, lsr #13 @ extract max number of the index size -loop1: - mov r9, r7 @ create working copy of max index -loop2: - ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11 - THUMB( lsl r6, r4, r5 ) - THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 - ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 - mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the index - bge loop2 - subs r4, r4, #1 @ decrement the way - bge loop1 -skip: - add r10, r10, #2 @ increment cache number - cmp r3, r10 - bgt flush_levels -finished: - mov r10, #0 @ swith back to cache level 0 - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - dsb st - isb - bx lr -ENDPROC(__v7_flush_dcache_all) - -ENTRY(v7_flush_dcache_all) - ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} ) - THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) - bl __v7_flush_dcache_all - ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) - THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) - bx lr -ENDPROC(v7_flush_dcache_all) - -/* - * v7_invalidate_dcache_all() - * - * Invalidate the whole D-cache. - * - * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) - * - * Note: copied from __v7_flush_dcache_all above with - * mcr p15, 0, r11, c7, c14, 2 - * Replaced with: - * mcr p15, 0, r11, c7, c6, 2 - */ -ENTRY(__v7_invalidate_dcache_all) - dmb @ ensure ordering with previous memory accesses - mrc p15, 1, r0, c0, c0, 1 @ read clidr - mov r3, r0, lsr #23 @ move LoC into position - ands r3, r3, #7 << 1 @ extract LoC*2 from clidr - beq inval_finished @ if loc is 0, then no need to clean - mov r10, #0 @ start clean at cache level 0 -inval_levels: - add r2, r10, r10, lsr #1 @ work out 3x current cache level - mov r1, r0, lsr r2 @ extract cache type bits from clidr - and r1, r1, #7 @ mask of the bits for current cache only - cmp r1, #2 @ see what cache we have at this level - blt inval_skip @ skip if no cache, or just i-cache - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - isb @ isb to sych the new cssr&csidr - mrc p15, 1, r1, c0, c0, 0 @ read the new csidr - and r2, r1, #7 @ extract the length of the cache lines - add r2, r2, #4 @ add 4 (line length offset) - movw r4, #0x3ff - ands r4, r4, r1, lsr #3 @ find maximum number on the way size - clz r5, r4 @ find bit position of way size increment - movw r7, #0x7fff - ands r7, r7, r1, lsr #13 @ extract max number of the index size -inval_loop1: - mov r9, r7 @ create working copy of max index -inval_loop2: - ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11 - THUMB( lsl r6, r4, r5 ) - THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 - ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 - mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way - subs r9, r9, #1 @ decrement the index - bge inval_loop2 - subs r4, r4, #1 @ decrement the way - bge inval_loop1 -inval_skip: - add r10, r10, #2 @ increment cache number - cmp r3, r10 - bgt inval_levels -inval_finished: - mov r10, #0 @ swith back to cache level 0 - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - dsb st - isb - bx lr -ENDPROC(__v7_invalidate_dcache_all) - -ENTRY(v7_invalidate_dcache_all) - ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} ) - THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) - bl __v7_invalidate_dcache_all - ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) - THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) - bx lr -ENDPROC(v7_invalidate_dcache_all) diff --git a/arch/arm/mach-uniphier/arm32/lowlevel_init.S b/arch/arm/mach-uniphier/arm32/lowlevel_init.S index cc34116..6f05abf 100644 --- a/arch/arm/mach-uniphier/arm32/lowlevel_init.S +++ b/arch/arm/mach-uniphier/arm32/lowlevel_init.S @@ -38,7 +38,7 @@ ENTRY(lowlevel_init) * to do next is to create a page table and switch over to it. */ bl create_page_table - bl __v7_flush_dcache_all + bl v7_flush_dcache_all
/* Disable MMU and Dcache before switching Page Table */ mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register) @@ -140,3 +140,68 @@ ENTRY(create_page_table) str r0, [r12, #4] @ mark the second section as Normal mov pc, lr ENDPROC(create_page_table) + +/* We don't use Thumb instructions for now */ +#define ARM(x...) x +#define THUMB(x...) + +/* + * v7_flush_dcache_all() + * + * Flush the whole D-cache. + * + * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) + * + * - mm - mm_struct describing address space + * + * Note: copied from arch/arm/mm/cache-v7.S of Linux 4.4 + */ +ENTRY(v7_flush_dcache_all) + dmb @ ensure ordering with previous memory accesses + mrc p15, 1, r0, c0, c0, 1 @ read clidr + mov r3, r0, lsr #23 @ move LoC into position + ands r3, r3, #7 << 1 @ extract LoC*2 from clidr + beq finished @ if loc is 0, then no need to clean +start_flush_levels: + mov r10, #0 @ start clean at cache level 0 +flush_levels: + add r2, r10, r10, lsr #1 @ work out 3x current cache level + mov r1, r0, lsr r2 @ extract cache type bits from clidr + and r1, r1, #7 @ mask of the bits for current cache only + cmp r1, #2 @ see what cache we have at this level + blt skip @ skip if no cache, or just i-cache + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + isb @ isb to sych the new cssr&csidr + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr + and r2, r1, #7 @ extract the length of the cache lines + add r2, r2, #4 @ add 4 (line length offset) + movw r4, #0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the way size + clz r5, r4 @ find bit position of way size increment + movw r7, #0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop1: + mov r9, r7 @ create working copy of max index +loop2: + ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11 + THUMB( lsl r6, r4, r5 ) + THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 + ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 + mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way + bge loop1 +skip: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt flush_levels +finished: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + dsb st + isb + mov pc, lr +ENDPROC(v7_flush_dcache_all)