
On 2024/4/1 04:28, Jonas Karlman wrote:
Sync rk3399-rockpro64 device tree from linux v6.8.
Add SF_DEFAULT_SPEED=10000000 and SPI_FLASH_SFDP_SUPPORT=y to improve support for booting from SPI flash.
Remove USE_PREBOOT=y to speed up booting, standard boot will init USB after faster boot media has been evaluated.
Add CMD_POWEROFF=y to support poweroff using cmdline and power on using the pwr button on the board.
Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.
Remove SPL_TINY_MEMSET=y to use full memset in SPL.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3399-rockpro64.dtsi | 98 ++++++++++++++++++++++++++++-- configs/rockpro64-rk3399_defconfig | 7 ++- 2 files changed, 97 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi index 6bff8db7d33e..f30b82a10ca3 100644 --- a/arch/arm/dts/rk3399-rockpro64.dtsi +++ b/arch/arm/dts/rk3399-rockpro64.dtsi @@ -11,6 +11,7 @@
/ { aliases {
mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci;ethernet0 = &gmac;
@@ -20,6 +21,15 @@ stdout-path = "serial2:1500000n8"; };
- /* enable for panel backlight support */
- backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <5>;
pwms = <&pwm0 0 1000000 0>;
status = "disabled";
- };
- clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>;
@@ -33,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>;
power {
key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power";
@@ -69,6 +79,7 @@
fan: pwm-fan { compatible = "pwm-fan";
#cooling-cells = <2>; fan-supply = <&vcc12v_dcin>; pwms = <&pwm1 0 50000 0>;cooling-levels = <0 100 150 200 255>;
@@ -106,6 +117,14 @@ }; };
- avdd: avdd-regulator {
compatible = "regulator-fixed";
regulator-name = "avdd";
regulator-min-microvolt = <11000000>;
regulator-max-microvolt = <11000000>;
vin-supply = <&vcc3v3_s0>;
- };
- vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin";
@@ -212,12 +231,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>;
regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1700000>;pwm-supply = <&vcc5v0_sys>;
}; };vin-supply = <&vcc5v0_sys>;
@@ -245,6 +264,34 @@ cpu-supply = <&vdd_cpu_b>; };
+&cpu_thermal {
- trips {
cpu_warm: cpu_warm {
temperature = <55000>;
hysteresis = <2000>;
type = "active";
};
cpu_hot: cpu_hot {
temperature = <65000>;
hysteresis = <2000>;
type = "active";
};
- };
- cooling-maps {
map2 {
trip = <&cpu_warm>;
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
};
map3 {
trip = <&cpu_hot>;
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
};
- };
+};
- &emmc_phy { status = "okay"; };
@@ -371,8 +418,6 @@
vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch";
regulator-always-on;
regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem {
@@ -461,8 +506,6 @@
vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; };
@@ -536,6 +579,19 @@ vbus-supply = <&vcc5v0_typec>; status = "okay"; };
/* enable for pine64 touch screen support */
touch: touchscreen@5d {
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
AVDD28-supply = <&vcc3v0_touch>;
VDDIO-supply = <&vcc3v0_touch>;
irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
status = "disabled";
}; };
&i2s0 {
@@ -571,6 +627,36 @@ gpio1830-supply = <&vcc_3v0>; };
+/* enable for pine64 panel display support */ +&mipi_dsi {
- clock-master;
- status = "disabled";
- ports {
mipi_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
- };
- mipi_panel: panel@0 {
compatible = "feiyang,fy07024di26a30d";
reg = <0>;
avdd-supply = <&avdd>;
backlight = <&backlight>;
dvdd-supply = <&vcc3v3_s0>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
- };
+};
- &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>;
diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig index 173f8f75020d..4e1af37a1559 100644 --- a/configs/rockpro64-rk3399_defconfig +++ b/configs/rockpro64-rk3399_defconfig @@ -4,6 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_SF_DEFAULT_SPEED=10000000 CONFIG_ENV_SIZE=0x8000 CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" @@ -20,7 +21,6 @@ CONFIG_PCI=y CONFIG_DEBUG_UART=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y -CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 @@ -34,6 +34,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y @@ -57,7 +58,10 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH_PHY=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_NVME_PCI=y @@ -96,5 +100,4 @@ CONFIG_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y CONFIG_DISPLAY_ROCKCHIP_HDMI=y -CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y