Re: [U-Boot] [PATCH 3/4] mmc: Fix block length for DDR mode

Hi Andrew,

On Dec 1, 2014, at 14:59 , Andrew Gabbasov andrew_gabbasov@mentor.com wrote:

Block length for write and read commands is fixed to 512 bytes when the card is in Dual Data Rate mode. If block length read from CSD is different, make sure the driver will use correct length in all further calculations and settings.

Signed-off-by: Andrew Gabbasov andrew_gabbasov@mentor.com

drivers/mmc/mmc.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index d878c1e..9918597 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1170,6 +1170,12 @@ static int mmc_startup(struct mmc *mmc)

mmc_set_clock(mmc, mmc->tran_speed);

• /* Fix the block length for DDR mode */
• if (mmc->ddr_mode) {

• mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
  

• mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
  

• }
• /* fill in device description */ mmc->block_dev.lun = 0; mmc->block_dev.type = 0;

-- 2.1.0

Applied, thanks.

— Pantelis