Re: [U-Boot] U-Boot version for a new port

Hi,

From: "Roman Mashak" romez777@gmail.com Subject: [U-Boot] U-Boot version for a new port I'm planning to make a port on a ARM926EJ-S based board. What is the recommended way: take release or GIT version as a base ?

Depends on what processor you are using, atmel at91sam9 series or omap or ti davinci

If s, then check if your board/processor configs match with any of these.

Try to port their configuration & files to your board.

Look at arm versatile board, ti davinci boards for reference.

Hope this helps

Regards Gururaja