On 23.12.2022 14:34, Sergiu Moga wrote:
This patch series originates from a bigger patch series: https://lists.denx.de/pipermail/u-boot/2022-December/502865.html
Register ohci-at91 driver into Driver Model. In order for the VBUS to stay enabled, a `child_pre_probe` method has been added to overcome the DM core disabling it in `usb_scan_device`: when the generic `device_probe` method is called, the pinctrl is processed once again, undoing whatever changes have been made in our driver's probe method. In order to enable USB on SAMA7G5 the addition of the USB 2.0 PHY drivers were required.
Cristian Birsan (1): usb: ohci-at91: Add `ohci_t` field in `ohci_at91_priv`
Sergiu Moga (3): phy: at91: Add support for the USB 2.0 PHY's of SAMA7 usb: ohci-at91: Enable OHCI functionality and register into DM usb: ohci-at91: Add USB PHY functionality
drivers/phy/Kconfig | 10 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-sama7-usb.c | 90 +++++++++++++ drivers/phy/phy-sama7-utmi-clk.c | 202 +++++++++++++++++++++++++++++ drivers/usb/host/ohci-at91.c | 215 +++++++++++++++++++++++++++++++ 5 files changed, 518 insertions(+) create mode 100644 drivers/phy/phy-sama7-usb.c create mode 100644 drivers/phy/phy-sama7-utmi-clk.c
By the way, this also depends on the following patch series: https://lists.denx.de/pipermail/u-boot/2022-December/502979.html