On 10/16/2013 10:24 AM, Heiko Schocher wrote:
Hello Michael,
Am 15.10.2013 22:23, schrieb Michael Burr:
Fixed bug with alen == 0 in 'i2c_write', 'i2c_read'
Further minor corrections:
Write 'address' register before 'data' register. Write 'transfer_size' register before 'address' register.
Signed-off-by: Michael Burr michael.burr@logicpd.com Cc: Heiko Schocher hs@denx.de Cc: Michal Simek monstr@monstr.eu
Tested: Xilinx ZC702 eval board. Write and read registers with addresses of length 0 and 1.
Change history:
v2: put this in a series instead of by itself v3: fixed formatting problem in patch message v4: _really_ fixed this time! v5: yet another try v6: one more time v7: again v8: After trying many times, I cannot get Patchwork to properly understand the diff in this message. As a workaround, please accept the diff in my patch of 2013-09-24, titled "[U-Boot] I2C: Zynq: Support for 0-length register address", which is 100%
equivalent to the patch in this message (1/2). It should still be applied before the patch in the second message (2/2).
Hmm.. please try to post a correct version of this patch, as I not really want to search the correct patch ... I am sure I will pick up the wrong version and I cannot test anything.
Thanks!
Hmm.. if you have problems with your commit message, you can reedit it:
- get the commit id before your commit you want to edit
- "git rebase -i commit-id" -> you get a list of commits, see for help maybe here: https://help.github.com/articles/interactive-rebase
Please remove the ">" in your commit message ... maybe this confuses patchwork ...
Albert is right. Just use patman -n to see your patches to get it done correctly and then just use patman for sending. There is nice README which describes everything what you need.
Thanks, Michal