Acked-by: Nobuhiro Iwamatsu iwamatsu@nigauri.org
Best regards, Nobuhiro
On Thu, Jan 27, 2011 at 10:06:08AM +0900, Yoshihiro Shimoda wrote:
Some CPU needs cache handling. So this patch add the config of CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
about v2:
- add description of new configuration to README
(This patch depends on "README: add description of sh_eth driver")
README | 3 +++ drivers/net/sh_eth.c | 9 +++++++++ 2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/README b/README index 41458a3..7de9b14 100644 --- a/README +++ b/README @@ -897,6 +897,9 @@ The following options need to be configured: CONFIG_SH_ETHER_PHY_ADDR Define the ETH PHY's address
CONFIG_SH_ETHER_CACHE_WRITEBACKIf this option is set, the driver enables cache flush.
- USB Support: At the moment only the UHCI host controller is supported (PIP405, MIP405, MPC5200); define
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 86cc324..53d918d 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -36,6 +36,12 @@ #ifndef CONFIG_SH_ETHER_PHY_ADDR # error "Please define CONFIG_SH_ETHER_PHY_ADDR" #endif +#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK +#define flush_cache_wback(addr, len) \
dcache_wback_range((u32)addr, (u32)(addr + len - 1))+#else +#define flush_cache_wback(...) +#endif
#define SH_ETH_PHY_DELAY 50000
@@ -197,6 +203,7 @@ int sh_eth_send(struct eth_device *dev, volatile void *packet, int len) }
/* Update tx descriptor */
- flush_cache_wback(packet, len); port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet); port_info->tx_desc_cur->td1 = len << 16; /* Must preserve the end of descriptor list indication */
@@ -312,6 +319,7 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) & ~(TX_DESC_SIZE - 1));
- flush_cache_wback(tmp_addr, NUM_TX_DESC * sizeof(struct tx_desc_s)); /* Make sure we use a P2 address (non-cacheable) */ port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr); port_info->tx_desc_cur = port_info->tx_desc_base;
@@ -361,6 +369,7 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) & ~(RX_DESC_SIZE - 1));
- flush_cache_wback(tmp_addr, NUM_RX_DESC * sizeof(struct rx_desc_s)); /* Make sure we use a P2 address (non-cacheable) */ port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr);
-- 1.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot