Dear Otavio Salvador,
On Wed, Mar 6, 2013 at 12:41 PM, Marek Vasut marex@denx.de wrote:
Dear Otavio Salvador,
On Wed, Mar 6, 2013 at 11:31 AM, Marek Vasut marex@denx.de wrote:
Dear Otavio Salvador,
On Thu, Feb 28, 2013 at 7:59 PM, Fabio Estevam festevam@gmail.com
wrote:
From: Fabio Estevam fabio.estevam@freescale.com
Currently the following kernel hang happens when loading a 2.6.35 kernel from Freeescale on a mx28evk board:
RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bus freq driver module loaded IMX usb wakeup probe usb h1 wakeup device is registered mxs_cpu_init: cpufreq init finished ...
Loading the same kernel using the bootlets from the imx-bootlets-src-10.12.01 package, the hang does not occur.
Comparing the DDR2 initialization from the bootlets code against the U-boot one, we can notice some mismatches, and after applying the same initialization into U-boot the 2.6.35 kernel can boot normally.
Also tested with 'mtest' command, which runs succesfully.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
Acked-by: Otavio Salvador otavio@ossystems.com.br
Otavio, did you review the changes done in this patch ?
This is the setup used in FSL U-Boot and it fixes 2.6.35.3 cpufreq kernel hang; it is good enough for me to accept it. If you care enough, go ahead and check every change bit.
That is indeed the plan, I will Ack this after I am done with it. It will still make it for .04, dont worry.
You should not Ack patches you did not even test nor validate, since the value of your Ack is declining.
Are you sure you read my comment?
... it fixes 2.6.35.3 cpufreq kernel hang; ...
Yes, I did read it.
Best regards, Marek Vasut