[U-Boot] am33xx : bit-flip correction in oob

Hi,

we're running 2014.04-rc3 on custom am335x board (same configuration as BBB). When spl is loading u-boot from nand flash we can see a lot of messages in console: nand: bit-flip corrected @oob=0

It is always the same position (seems to be first byte in oob). Anybody experienced same problem? I've tested on 2 different flashes and result is same.

In config we're using: #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_NAND_OMAP_ELM

BR,

marek