Re: [U-Boot] [PATCH 1/2] mx31: Fix boot hang by avoiding vector relocation

2 Mar 2015


      Hi Fabio, Magnus, Anatolji, Sebastian,
On 23/02/2015 13:09, Fabio Estevam wrote:
...
Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx31
does not boot anymore.
Add a specific relocate_vectors macro that skips the vector relocation, as the
i.MX31 SoC does not provide RAM at the high vectors address (0xFFFF0000), and
(0x00000000) maps to ROM.
This allows mx31 to boot again.
Cc: Anatolij Gustschin agust@denx.de
Cc: Magnus Lilja lilja.magnus@gmail.com
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com

As boards are currently broken, I think can help if patches are merged
even if they are not fully tested. I could at least test on a mx35, and
board boots again.
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================