Add the NIC device ID and adjust the PCI bar regions.
Signed-off-by: Minda Chen minda.chen@starfivetech.com --- drivers/net/rtl8169.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 34e4cff1e9..963702777c 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -353,10 +353,11 @@ static const unsigned int rtl8169_rx_config = (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
static struct pci_device_id supported[] = { + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) }, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8161) }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) }, - { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) }, {} };
@@ -1051,8 +1052,9 @@ static int rtl8169_eth_probe(struct udevice *dev) int ret;
switch (pplat->device) { - case 0x8168: case 0x8125: + case 0x8161: + case 0x8168: region = 2; break; default: