Re: [U-Boot] [PATCH 3/4][v2] powerpc/85xx:Make debug exception vector accessible

Scott Wood wrote:

...

...

For your kind information : in start.S, label label "create_ccsr_new_tlb", "create_ccsr_old_tlb" uses MAS7 without CONFIG_ENABLE_36BIT_PHYS #define. It should be fixed ??

Yes, it should be fixed. That was a fairly recent change and perhaps e500v1 has not been tested since then -- Timur, could you look at this?

On e500v1 parts, CONFIG_SYS_CCSRBAR_PHYS_HIGH will always be 0, so it will only write 0 to MAS7. Is that still considered a bad thing? The tlbwe will ignore MAS7.