Add ADC, CAN, GPIO, MC, DMA, DEVCFG, USB, Watchdog IPs to DTSI.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
Sync with the kernel.
--- arch/arm/dts/zynq-7000.dtsi | 100 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+)
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 6faac4044627..fc5dd4d4a38e 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -51,6 +51,48 @@ interrupt-parent = <&intc>; ranges;
+ adc: adc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&intc>; + clocks = <&clkc 12>; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + gpio0: gpio@e000a000 { + compatible = "xlnx,zynq-gpio-1.0"; + #gpio-cells = <2>; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; @@ -91,6 +133,11 @@ cache-level = <2>; };
+ mc: memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + }; + uart0: serial@e0000000 { compatible = "xlnx,xuartps"; status = "disabled"; @@ -199,6 +246,29 @@ }; };
+ dmac_s: dmac@f8003000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xf8003000 0x1000>; + interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; + interrupts = <0 13 4>, + <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, + <0 40 4>, <0 41 4>, + <0 42 4>, <0 43 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <4>; + clocks = <&clkc 27>; + clock-names = "apb_pclk"; + }; + + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + }; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; @@ -222,6 +292,7 @@ clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; interrupts = < 1 13 0x301 >; @@ -229,5 +300,34 @@ reg = < 0xf8f00600 0x20 >; clocks = <&clkc 4>; } ; + + usb0: usb@e0002000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 28>; + interrupt-parent = <&intc>; + interrupts = <0 21 4>; + reg = <0xe0002000 0x1000>; + phy_type = "ulpi"; + }; + + usb1: usb@e0003000 { + compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; + status = "disabled"; + clocks = <&clkc 29>; + interrupt-parent = <&intc>; + interrupts = <0 44 4>; + reg = <0xe0003000 0x1000>; + phy_type = "ulpi"; + }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "cdns,wdt-r1p2"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + timeout-sec = <10>; + }; }; };