In this commit and the next one, test scripts for new filesystem functionalities introduced by my patch set, "fs: fat: extend FAT write operations," are provided.
In particular, this patch adds test cases for sub-directory write and write with non-zero offset.
Signed-off-by: AKASHI Takahiro takahiro.akashi@linaro.org --- test/py/tests/test_fs/conftest.py | 84 ++++++++++ test/py/tests/test_fs/fstest_defs.py | 3 + test/py/tests/test_fs/test_ext.py | 224 +++++++++++++++++++++++++++ 3 files changed, 311 insertions(+) create mode 100644 test/py/tests/test_fs/test_ext.py
diff --git a/test/py/tests/test_fs/conftest.py b/test/py/tests/test_fs/conftest.py index 9155ccf84266..f72d53d88fc8 100644 --- a/test/py/tests/test_fs/conftest.py +++ b/test/py/tests/test_fs/conftest.py @@ -10,6 +10,7 @@ from subprocess import call, check_call, check_output, CalledProcessError from fstest_defs import *
supported_fs_basic = ['fat16', 'fat32', 'ext4'] +supported_fs_ext = ['fat16', 'fat32']
# # Filesystem test specific setup @@ -20,6 +21,7 @@ def pytest_addoption(parser):
def pytest_configure(config): global supported_fs_basic + global supported_fs_ext
def intersect(listA, listB): return [x for x in listA if x in listB] @@ -28,11 +30,15 @@ def pytest_configure(config): if supported_fs: print("*** FS TYPE modified: %s" % supported_fs) supported_fs_basic = intersect(supported_fs, supported_fs_basic) + supported_fs_ext = intersect(supported_fs, supported_fs_ext)
def pytest_generate_tests(metafunc): if 'fs_obj_basic' in metafunc.fixturenames: metafunc.parametrize('fs_obj_basic', supported_fs_basic, indirect=True, scope='module') + if 'fs_obj_ext' in metafunc.fixturenames: + metafunc.parametrize('fs_obj_ext', supported_fs_ext, + indirect=True, scope='module')
# # Helper functions @@ -214,3 +220,81 @@ def fs_obj_basic(request, u_boot_config): call('rmdir %s' % mount_dir, shell=True) # if fs_img: # call('rm -f %s' % fs_img, shell=True) + + +# +# Fixture for extended fs test +# +# NOTE: yield_fixture was deprecated since pytest-3.0 +@pytest.yield_fixture() +def fs_obj_ext(request, u_boot_config): + fs_type = request.param + fs_img = '' + + fs_ubtype = fstype_to_ubname(fs_type) + check_ubconfig(u_boot_config, fs_ubtype) + + mount_dir = u_boot_config.persistent_data_dir + '/mnt' + + min_file = mount_dir + '/' + MIN_FILE + tmp_file = mount_dir + '/tmpfile' + + try: + + # 128MiB volume + fs_img = mk_fs(u_boot_config, fs_type, 0x8000000, '128MB') + + # Mount the image so we can populate it. + check_call('mkdir -p %s' % mount_dir, shell=True) + mount_fs(u_boot_config, fs_type, fs_img, mount_dir) + + # Create a test directory + check_call('mkdir %s/dir1' % mount_dir, shell=True) + + # Create a small file and calculate md5 + check_call('dd if=/dev/urandom of=%s bs=1K count=20' + % min_file, shell=True) + out = check_output( + 'dd if=%s bs=1K 2> /dev/null | md5sum' + % min_file, shell=True) + md5val = [ out.split()[0] ] + + # Calculate md5sum of Test Case 4 + check_call('dd if=%s of=%s bs=1K count=20' + % (min_file, tmp_file), shell=True) + check_call('dd if=%s of=%s bs=1K seek=5 count=20' + % (min_file, tmp_file), shell=True) + out = check_output('dd if=%s bs=1K 2> /dev/null | md5sum' + % tmp_file, shell=True) + md5val.append(out.split()[0]) + + # Calculate md5sum of Test Case 5 + check_call('dd if=%s of=%s bs=1K count=20' + % (min_file, tmp_file), shell=True) + check_call('dd if=%s of=%s bs=1K seek=5 count=5' + % (min_file, tmp_file), shell=True) + out = check_output('dd if=%s bs=1K 2> /dev/null | md5sum' + % tmp_file, shell=True) + md5val.append(out.split()[0]) + + # Calculate md5sum of Test Case 7 + check_call('dd if=%s of=%s bs=1K count=20' + % (min_file, tmp_file), shell=True) + check_call('dd if=%s of=%s bs=1K seek=20 count=20' + % (min_file, tmp_file), shell=True) + out = check_output('dd if=%s bs=1K 2> /dev/null | md5sum' + % tmp_file, shell=True) + md5val.append(out.split()[0]) + + check_call('rm %s' % tmp_file, shell=True) + umount_fs(u_boot_config, fs_type, mount_dir) + except CalledProcessError: + pytest.skip('Setup failed for filesystem: ' + fs_type) + return + else: + yield [fs_ubtype, fs_img, md5val] + finally: + umount_fs(u_boot_config, fs_type, mount_dir) + call('rmdir %s' % mount_dir, shell=True) +# if fs_img: +# call('rm -f %s' % fs_img, shell=True) diff --git a/test/py/tests/test_fs/fstest_defs.py b/test/py/tests/test_fs/fstest_defs.py index f26dd06cacf2..5f107562d952 100644 --- a/test/py/tests/test_fs/fstest_defs.py +++ b/test/py/tests/test_fs/fstest_defs.py @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0+
+# $MIN_FILE is the name of the 20KB file in the file system image +MIN_FILE='testfile' + # $SMALL_FILE is the name of the 1MB file in the file system image SMALL_FILE='1MB.file'
diff --git a/test/py/tests/test_fs/test_ext.py b/test/py/tests/test_fs/test_ext.py new file mode 100644 index 000000000000..38217d08bf64 --- /dev/null +++ b/test/py/tests/test_fs/test_ext.py @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018, Linaro Limited +# Author: Takahiro Akashi takahiro.akashi@linaro.org +# +# U-Boot File System:Exntented Test + +""" +This test verifies extended write operation on file system. +""" + +import pytest +import re +from fstest_defs import * + +@pytest.mark.boardspec('sandbox') +class TestFsExt(object): + def test_fs_ext1(self, u_boot_console, fs_obj_ext): + """ + Test Case 1 - write a file with absolute path + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 1 - write with abs path'): + # Test Case 1a - Check if command successfully returned + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w1 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + assert('20480 bytes written' in ''.join(output)) + + # Test Case 1b - Check md5 of file content + output = u_boot_console.run_command_list([ + 'mw.b %x 00 100' % ADDR, + '%sload host 0:0 %x /dir1/%s.w1' % (fs_type, ADDR, MIN_FILE), + 'md5sum %x $filesize' % ADDR, + 'setenv filesize']) + assert(md5val[0] in ''.join(output)) + + def test_fs_ext2(self, u_boot_console, fs_obj_ext): + """ + Test Case 2 - write to a file with relative path + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 2 - write with rel path'): + # Test Case 2a - Check if command successfully returned + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x dir1/%s.w2 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + assert('20480 bytes written' in ''.join(output)) + + # Test Case 2b - Check md5 of file content + output = u_boot_console.run_command_list([ + 'mw.b %x 00 100' % ADDR, + '%sload host 0:0 %x dir1/%s.w2' % (fs_type, ADDR, MIN_FILE), + 'md5sum %x $filesize' % ADDR, + 'setenv filesize']) + assert(md5val[0] in ''.join(output)) + + def test_fs_ext3(self, u_boot_console, fs_obj_ext): + """ + Test Case 3 - write to a file with invalid path + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 3 - write with invalid path'): + # Test Case 3 - Check if command expectedly failed + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/none/%s.w3 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + assert('Unable to write "/dir1/none/' in ''.join(output)) + + def test_fs_ext4(self, u_boot_console, fs_obj_ext): + """ + Test Case 4 - write at non-zero offset, enlarging file size + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 4 - write at non-zero offset, enlarging file size'): + # Test Case 4a - Check if command successfully returned + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w4 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + output = u_boot_console.run_command( + '%swrite host 0:0 %x /dir1/%s.w4 $filesize 0x1400' + % (fs_type, ADDR, MIN_FILE)) + assert('20480 bytes written' in output) + + # Test Case 4b - Check size of written file + output = u_boot_console.run_command_list([ + '%ssize host 0:0 /dir1/%s.w4' % (fs_type, MIN_FILE), + 'printenv filesize', + 'setenv filesize']) + assert('filesize=6400' in ''.join(output)) + + # Test Case 4c - Check md5 of file content + output = u_boot_console.run_command_list([ + 'mw.b %x 00 100' % ADDR, + '%sload host 0:0 %x /dir1/%s.w4' % (fs_type, ADDR, MIN_FILE), + 'md5sum %x $filesize' % ADDR, + 'setenv filesize']) + assert(md5val[1] in ''.join(output)) + + def test_fs_ext5(self, u_boot_console, fs_obj_ext): + """ + Test Case 5 - write at non-zero offset, shrinking file size + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 5 - write at non-zero offset, shrinking file size'): + # Test Case 5a - Check if command successfully returned + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w5 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + output = u_boot_console.run_command( + '%swrite host 0:0 %x /dir1/%s.w5 0x1400 0x1400' + % (fs_type, ADDR, MIN_FILE)) + assert('5120 bytes written' in output) + + # Test Case 5b - Check size of written file + output = u_boot_console.run_command_list([ + '%ssize host 0:0 /dir1/%s.w5' % (fs_type, MIN_FILE), + 'printenv filesize', + 'setenv filesize']) + assert('filesize=2800' in ''.join(output)) + + # Test Case 5c - Check md5 of file content + output = u_boot_console.run_command_list([ + 'mw.b %x 00 100' % ADDR, + '%sload host 0:0 %x /dir1/%s.w5' % (fs_type, ADDR, MIN_FILE), + 'md5sum %x $filesize' % ADDR, + 'setenv filesize']) + assert(md5val[2] in ''.join(output)) + + def test_fs_ext6(self, u_boot_console, fs_obj_ext): + """ + Test Case 6 - write nothing at the start, truncating to zero + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 6 - write nothing at the start, truncating to zero'): + # Test Case 6a - Check if command successfully returned + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w6 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + output = u_boot_console.run_command( + '%swrite host 0:0 %x /dir1/%s.w6 0 0' + % (fs_type, ADDR, MIN_FILE)) + assert('0 bytes written' in output) + + # Test Case 6b - Check size of written file + output = u_boot_console.run_command_list([ + '%ssize host 0:0 /dir1/%s.w6' % (fs_type, MIN_FILE), + 'printenv filesize', + 'setenv filesize']) + assert('filesize=0' in ''.join(output)) + + def test_fs_ext7(self, u_boot_console, fs_obj_ext): + """ + Test Case 7 - write at the end (append) + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 7 - write at the end (append)'): + # Test Case 7a - Check if command successfully returned + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w7 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + output = u_boot_console.run_command( + '%swrite host 0:0 %x /dir1/%s.w7 $filesize $filesize' + % (fs_type, ADDR, MIN_FILE)) + assert('20480 bytes written' in output) + + # Test Case 7b - Check size of written file + output = u_boot_console.run_command_list([ + '%ssize host 0:0 /dir1/%s.w7' % (fs_type, MIN_FILE), + 'printenv filesize', + 'setenv filesize']) + assert('filesize=a000' in ''.join(output)) + + # Test Case 7c - Check md5 of file content + output = u_boot_console.run_command_list([ + 'mw.b %x 00 100' % ADDR, + '%sload host 0:0 %x /dir1/%s.w7' % (fs_type, ADDR, MIN_FILE), + 'md5sum %x $filesize' % ADDR, + 'setenv filesize']) + assert(md5val[3] in ''.join(output)) + + def test_fs_ext8(self, u_boot_console, fs_obj_ext): + """ + Test Case 8 - write at offset beyond the end of file + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 8 - write beyond the end'): + # Test Case 8a - Check if command expectedly failed + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w8 $filesize' + % (fs_type, ADDR, MIN_FILE)]) + output = u_boot_console.run_command( + '%swrite host 0:0 %x /dir1/%s.w8 0x1400 %x' + % (fs_type, ADDR, MIN_FILE, 0x100000 + 0x1400)) + assert('Unable to write "/dir1' in output) + + def test_fs_ext9(self, u_boot_console, fs_obj_ext): + """ + Test Case 9 - write to a non-existing file at non-zero offset + """ + fs_type,fs_img,md5val = fs_obj_ext + with u_boot_console.log.section('Test Case 9 - write to non-existing file with non-zero offset'): + # Test Case 9a - Check if command expectedly failed + output = u_boot_console.run_command_list([ + 'host bind 0 %s' % fs_img, + '%sload host 0:0 %x /%s' % (fs_type, ADDR, MIN_FILE), + '%swrite host 0:0 %x /dir1/%s.w9 0x1400 0x1400' + % (fs_type, ADDR, MIN_FILE)]) + assert('Unable to write "/dir1' in ''.join(output))