Ports A, C and D are 16 bits ports. Ports B and E are 32 bits ports.
The "compatible" is used to determine each port type.
This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company.
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Reviewed-by: FRANJOU Stephane stephane.franjou@csgroup.eu --- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/arch-mpc8xx/gpio.h | 12 + drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/mpc8xx_gpio.c | 347 ++++++++++++++++++++ 5 files changed, 368 insertions(+) create mode 100644 arch/powerpc/include/asm/arch-mpc8xx/gpio.h create mode 100644 drivers/gpio/mpc8xx_gpio.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e0801c2594..bee59c3bea 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -28,6 +28,7 @@ config MPC85xx
config MPC8xx bool "MPC8xx" + select CREATE_ARCH_SYMLINK select BOARD_EARLY_INIT_F imply CMD_REGINFO imply WDT_MPC8xx diff --git a/arch/powerpc/include/asm/arch-mpc8xx/gpio.h b/arch/powerpc/include/asm/arch-mpc8xx/gpio.h new file mode 100644 index 0000000000..6b73acbaee --- /dev/null +++ b/arch/powerpc/include/asm/arch-mpc8xx/gpio.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _MPC8XX_GPIO_H_ +#define _MPC8XX_GPIO_H_ + +struct mpc8xx_gpio_plat { + ulong addr; + unsigned long size; + uint ngpios; +}; + +#endif /* MPC8XX_GPIO_H_ */ diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 365615a53f..7d5ddbdee0 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -547,6 +547,13 @@ config MPC8XXX_GPIO value setting, the open-drain feature, which can configure individual GPIOs to work as open-drain outputs, is supported.
+config MPC8XX_GPIO + bool "Freescale MPC8XX GPIO driver" + depends on DM_GPIO + help + This driver supports parallel IO ports from MPC8XX CPUs. + Each GPIO bank is identified by its own entry in the device tree. + config MPC83XX_SPISEL_BOOT bool "Freescale MPC83XX SPISEL_BOOT driver" depends on DM_GPIO && ARCH_MPC830X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 7235714fcc..baceb54d31 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_DM644X_GPIO) += da8xx_gpio.o obj-$(CONFIG_ALTERA_PIO) += altera_pio.o obj-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o obj-$(CONFIG_MPC8XXX_GPIO) += mpc8xxx_gpio.o +obj-$(CONFIG_MPC8XX_GPIO) += mpc8xx_gpio.o obj-$(CONFIG_MPC83XX_SPISEL_BOOT) += mpc83xx_spisel_boot.o obj-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o obj-$(CONFIG_OMAP_GPIO) += omap_gpio.o diff --git a/drivers/gpio/mpc8xx_gpio.c b/drivers/gpio/mpc8xx_gpio.c new file mode 100644 index 0000000000..2f65346533 --- /dev/null +++ b/drivers/gpio/mpc8xx_gpio.c @@ -0,0 +1,347 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2020 CS Group + * Charles Frey charles.frey@c-s.fr + * + * based on driver/gpio/mpc8xxx_gpio.c, which is + * Copyright 2016 Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc + * + * based on arch/powerpc/include/asm/mpc85xx_gpio.h, which is + * Copyright 2010 eXMeritus, A Boeing Company + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <mapmem.h> +#include <asm/gpio.h> +#include <malloc.h> + +enum { + MPC8XX_CPM1_PORTA, + MPC8XX_CPM1_PORTB, + MPC8XX_CPM1_PORTC, + MPC8XX_CPM1_PORTD, + MPC8XX_CPM1_PORTE, +}; + +/* + * The MPC885 CPU CPM has 5 I/O ports, and each ports has different + * register length : 16 bits for ports A,C,D and 32 bits for ports + * B and E. + * + * This structure allows us to select the accessors according to the + * port we are configuring. + */ +struct mpc8xx_gpio_data { + /* The bank's register base in memory */ + void __iomem *base; + /* The address of the registers; used to identify the bank */ + ulong addr; + /* The GPIO count of the bank */ + uint gpio_count; + /* Type needed to use the correct accessors */ + int type; +}; + +/* Structure for ports A, C, D */ +struct iop_16 { + u16 pdir; + u16 ppar; + u16 podr; + u16 pdat; +}; + +/* Port B */ +struct iop_32_b { + u32 pdir; + u32 ppar; + u32 podr; + u32 pdat; +}; + +/* Port E */ +struct iop_32_e { + u32 pdir; + u32 ppar; + u32 psor; + u32 podr; + u32 pdat; +}; + +union iop_32 { + struct iop_32_b b; + struct iop_32_e e; +}; + +inline u32 gpio_mask(uint gpio, int type) +{ + if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE) + return 1U << (31 - (gpio)); + else + return 1U << (15 - (gpio)); +} + +static inline u16 gpio16_get_val(void __iomem *base, u16 mask, int type) +{ + struct iop_16 *regs = base; + + return in_be16(®s->pdat) & mask; +} + +static inline u16 gpio16_get_dir(void __iomem *base, u16 mask, int type) +{ + struct iop_16 *regs = base; + + return in_be16(®s->pdir) & mask; +} + +static inline void gpio16_set_in(void __iomem *base, u16 gpios, int type) +{ + struct iop_16 *regs = base; + + clrbits_be16(®s->pdat, gpios); + /* GPDIR register 0 -> input */ + clrbits_be16(®s->pdir, gpios); +} + +static inline void gpio16_set_lo(void __iomem *base, u16 gpios, int type) +{ + struct iop_16 *regs = base; + + clrbits_be16(®s->pdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be16(®s->pdir, gpios); +} + +static inline void gpio16_set_hi(void __iomem *base, u16 gpios, int type) +{ + struct iop_16 *regs = base; + + setbits_be16(®s->pdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be16(®s->pdir, gpios); +} + +/* PORT B AND E */ +static inline u32 gpio32_get_val(void __iomem *base, u32 mask, int type) +{ + union iop_32 __iomem *regs = base; + + if (type == MPC8XX_CPM1_PORTB) + return in_be32(®s->b.pdat) & mask; + else + return in_be32(®s->e.pdat) & mask; +} + +static inline u32 gpio32_get_dir(void __iomem *base, u32 mask, int type) +{ + union iop_32 __iomem *regs = base; + + if (type == MPC8XX_CPM1_PORTB) + return in_be32(®s->b.pdir) & mask; + else + return in_be32(®s->e.pdir) & mask; +} + +static inline void gpio32_set_in(void __iomem *base, u32 gpios, int type) +{ + union iop_32 __iomem *regs = base; + + if (type == MPC8XX_CPM1_PORTB) { + clrbits_be32(®s->b.pdat, gpios); + /* GPDIR register 0 -> input */ + clrbits_be32(®s->b.pdir, gpios); + } else { /* Port E */ + clrbits_be32(®s->e.pdat, gpios); + /* GPDIR register 0 -> input */ + clrbits_be32(®s->e.pdir, gpios); + } +} + +static inline void gpio32_set_lo(void __iomem *base, u32 gpios, int type) +{ + union iop_32 __iomem *regs = base; + + if (type == MPC8XX_CPM1_PORTB) { + clrbits_be32(®s->b.pdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be32(®s->b.pdir, gpios); + } else { + clrbits_be32(®s->e.pdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be32(®s->e.pdir, gpios); + } +} + +static inline void gpio32_set_hi(void __iomem *base, u32 gpios, int type) +{ + union iop_32 __iomem *regs = base; + + if (type == MPC8XX_CPM1_PORTB) { + setbits_be32(®s->b.pdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be32(®s->b.pdir, gpios); + } else { + setbits_be32(®s->e.pdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be32(®s->e.pdir, gpios); + } +} + +static int mpc8xx_gpio_direction_input(struct udevice *dev, uint gpio) +{ + struct mpc8xx_gpio_data *data = dev_get_priv(dev); + int type = data->type; + + if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE) + gpio32_set_in(data->base, gpio_mask(gpio, type), type); + else + gpio16_set_in(data->base, gpio_mask(gpio, type), type); + + return 0; +} + +static int mpc8xx_gpio_set_value(struct udevice *dev, uint gpio, int value) +{ + struct mpc8xx_gpio_data *data = dev_get_priv(dev); + int type = data->type; + + if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE) { + if (value) + gpio32_set_hi(data->base, gpio_mask(gpio, type), type); + else + gpio32_set_lo(data->base, gpio_mask(gpio, type), type); + } else { + if (value) + gpio16_set_hi(data->base, gpio_mask(gpio, type), type); + else + gpio16_set_lo(data->base, gpio_mask(gpio, type), type); + } + + return 0; +} + +static int mpc8xx_gpio_direction_output(struct udevice *dev, uint gpio, + int value) +{ + return mpc8xx_gpio_set_value(dev, gpio, value); +} + +static int mpc8xx_gpio_get_value(struct udevice *dev, uint gpio) +{ + struct mpc8xx_gpio_data *data = dev_get_priv(dev); + int type = data->type; + + /* Input -> read value from GPDAT register */ + if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE) + return gpio32_get_val(data->base, gpio_mask(gpio, type), type); + else + return gpio16_get_val(data->base, gpio_mask(gpio, type), type); +} + +static int mpc8xx_gpio_get_function(struct udevice *dev, uint gpio) +{ + struct mpc8xx_gpio_data *data = dev_get_priv(dev); + int type = data->type; + int dir; + + if (type == MPC8XX_CPM1_PORTB || type == MPC8XX_CPM1_PORTE) + dir = gpio32_get_dir(data->base, gpio_mask(gpio, type), type); + else + dir = gpio16_get_dir(data->base, gpio_mask(gpio, type), type); + return dir ? GPIOF_OUTPUT : GPIOF_INPUT; +} + +static int mpc8xx_gpio_ofdata_to_platdata(struct udevice *dev) +{ + struct mpc8xx_gpio_plat *plat = dev_get_plat(dev); + fdt_addr_t addr; + u32 reg[2]; + + dev_read_u32_array(dev, "reg", reg, 2); + addr = dev_translate_address(dev, reg); + + plat->addr = addr; + plat->size = reg[1]; + plat->ngpios = dev_read_u32_default(dev, "ngpios", 32); + + return 0; +} + +static int mpc8xx_gpio_platdata_to_priv(struct udevice *dev) +{ + struct mpc8xx_gpio_data *priv = dev_get_priv(dev); + struct mpc8xx_gpio_plat *plat = dev_get_plat(dev); + unsigned long size = plat->size; + int type; + + if (size == 0) + size = 0x100; + + priv->addr = plat->addr; + priv->base = map_sysmem(plat->addr, size); + + if (!priv->base) + return -ENOMEM; + + priv->gpio_count = plat->ngpios; + + type = dev_get_driver_data(dev); + + if ((type == MPC8XX_CPM1_PORTA || type == MPC8XX_CPM1_PORTC || + type == MPC8XX_CPM1_PORTD) && plat->ngpios == 32) + priv->gpio_count = 16; + + priv->type = type; + + return 0; +} + +static int mpc8xx_gpio_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct mpc8xx_gpio_data *data = dev_get_priv(dev); + char name[32], *str; + + mpc8xx_gpio_platdata_to_priv(dev); + + snprintf(name, sizeof(name), "MPC@%lx_", data->addr); + str = strdup(name); + + if (!str) + return -ENOMEM; + + uc_priv->bank_name = str; + uc_priv->gpio_count = data->gpio_count; + + return 0; +} + +static const struct dm_gpio_ops gpio_mpc8xx_ops = { + .direction_input = mpc8xx_gpio_direction_input, + .direction_output = mpc8xx_gpio_direction_output, + .get_value = mpc8xx_gpio_get_value, + .set_value = mpc8xx_gpio_set_value, + .get_function = mpc8xx_gpio_get_function, +}; + +static const struct udevice_id mpc8xx_gpio_ids[] = { + { .compatible = "fsl,cpm1-pario-bank-a", .data = MPC8XX_CPM1_PORTA }, + { .compatible = "fsl,cpm1-pario-bank-b", .data = MPC8XX_CPM1_PORTB }, + { .compatible = "fsl,cpm1-pario-bank-c", .data = MPC8XX_CPM1_PORTC }, + { .compatible = "fsl,cpm1-pario-bank-d", .data = MPC8XX_CPM1_PORTD }, + { .compatible = "fsl,cpm1-pario-bank-e", .data = MPC8XX_CPM1_PORTE }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(gpio_mpc8xx) = { + .name = "gpio_mpc8xx", + .id = UCLASS_GPIO, + .ops = &gpio_mpc8xx_ops, + .of_to_plat = mpc8xx_gpio_ofdata_to_platdata, + .plat_auto = sizeof(struct mpc8xx_gpio_plat), + .of_match = mpc8xx_gpio_ids, + .probe = mpc8xx_gpio_probe, + .priv_auto = sizeof(struct mpc8xx_gpio_data), +};