From: Henrik Nordstrom henrik@henriknordstrom.net
Add support for the x-powers axp209 pmic which is found on most A10, A13 and A20 boards.
While changing the boards.cfg lines for the Cubietruck, add myself as board maintainer for the Cubietruck.
Signed-off-by: Henrik Nordstrom henrik@henriknordstrom.net Signed-off-by: Hans de Goede hdegoede@redhat.com --- board/sunxi/board.c | 26 ++++++ boards.cfg | 6 +- drivers/power/Makefile | 1 + drivers/power/axp209.c | 198 +++++++++++++++++++++++++++++++++++++++++ include/axp209.h | 15 ++++ include/configs/sunxi-common.h | 5 ++ 6 files changed, 248 insertions(+), 3 deletions(-) create mode 100644 drivers/power/axp209.c create mode 100644 include/axp209.h
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 543b809..309bbd2 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -12,6 +12,9 @@ */
#include <common.h> +#ifdef CONFIG_AXP209_POWER +#include <axp209.h> +#endif #include <asm/arch/clock.h> #include <asm/arch/dram.h> #include <asm/arch/gpio.h> @@ -116,12 +119,35 @@ void i2c_init_board(void) #ifdef CONFIG_SPL_BUILD void sunxi_board_init(void) { + int power_failed = 0; unsigned long ramsize;
+#ifdef CONFIG_AXP209_POWER + power_failed |= axp209_init(); + power_failed |= axp209_set_dcdc2(1400); + power_failed |= axp209_set_dcdc3(1250); + power_failed |= axp209_set_ldo2(3000); + power_failed |= axp209_set_ldo3(2800); + power_failed |= axp209_set_ldo4(2800); +#endif + printf("DRAM:"); ramsize = sunxi_dram_init(); printf(" %lu MiB\n", ramsize >> 20); if (!ramsize) hang(); + + /* + * Only clock up the CPU to full speed if we are reasonably + * assured it's being powered with suitable core voltage + */ + if (!power_failed) +#ifdef CONFIG_SUN7I + clock_set_pll1(912000000); +#else + clock_set_pll1(1008000000); +#endif + else + printf("Failed to set core voltage! Can't set CPU frequency\n"); } #endif diff --git a/boards.cfg b/boards.cfg index 6029f00..72585a9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -381,9 +381,9 @@ Active arm armv7 s5pc1xx samsung goni Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang mk7.kang@samsung.com Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - Active arm armv7 sunxi - sunxi A13-OLinuXinoM sun5i:A13_OLINUXINOM,SPL,CONS_INDEX=2 Hans de Goede hdegoede@redhat.com -Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL Hans de Goede hdegoede@redhat.com -Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII - -Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - +Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL,AXP209_POWER Hans de Goede hdegoede@redhat.com +Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,AXP209_POWER,SUNXI_GMAC,RGMII Hans de Goede hdegoede@redhat.com +Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII Hans de Goede hdegoede@redhat.com Active arm armv7 sunxi - sunxi r7-tv-dongle sun5i:R7DONGLE,SPL Hans de Goede hdegoede@redhat.com Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier mathieu.poirier@linaro.org Active arm armv7 u8500 st-ericsson u8500 u8500_href - - diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 53ff97d..063ac8f 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -5,6 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
+obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c new file mode 100644 index 0000000..a3f9d52 --- /dev/null +++ b/drivers/power/axp209.c @@ -0,0 +1,198 @@ +/* + * (C) Copyright 2012 + * Henrik Nordstrom henrik@henriknordstrom.net + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <axp209.h> + +enum axp209_reg { + AXP209_POWER_STATUS = 0x00, + AXP209_CHIP_VERSION = 0x03, + AXP209_DCDC2_VOLTAGE = 0x23, + AXP209_DCDC3_VOLTAGE = 0x27, + AXP209_LDO24_VOLTAGE = 0x28, + AXP209_LDO3_VOLTAGE = 0x29, + AXP209_IRQ_STATUS3 = 0x4a, + AXP209_IRQ_STATUS5 = 0x4c, + AXP209_SHUTDOWN = 0x32, +}; + +#define AXP209_POWER_STATUS_ON_BY_DC (1<<0) + +#define AXP209_IRQ3_PEK_SHORT (1<<1) +#define AXP209_IRQ3_PEK_LONG (1<<0) + +#define AXP209_IRQ5_PEK_UP (1<<6) +#define AXP209_IRQ5_PEK_DOWN (1<<5) + +int axp209_write(enum axp209_reg reg, u8 val) +{ + return i2c_write(0x34, reg, 1, &val, 1); +} + +int axp209_read(enum axp209_reg reg, u8 *val) +{ + return i2c_read(0x34, reg, 1, val, 1); +} + +int axp209_set_dcdc2(int mvolt) +{ + int cfg = (mvolt - 700) / 25; + int rc; + u8 current; + + if (cfg < 0) + cfg = 0; + if (cfg > (1 << 6) - 1) + cfg = (1 << 6) - 1; + + /* Do we really need to be this gentle? It has built-in voltage slope */ + while ((rc = axp209_read(AXP209_DCDC2_VOLTAGE, ¤t)) == 0 && + current != cfg) { + if (current < cfg) + current++; + else + current--; + + rc = axp209_write(AXP209_DCDC2_VOLTAGE, current); + if (rc) + break; + } + + return rc; +} + +int axp209_set_dcdc3(int mvolt) +{ + int cfg = (mvolt - 700) / 25; + u8 reg; + int rc; + + if (cfg < 0) + cfg = 0; + if (cfg > (1 << 7) - 1) + cfg = (1 << 7) - 1; + + rc = axp209_write(AXP209_DCDC3_VOLTAGE, cfg); + rc |= axp209_read(AXP209_DCDC3_VOLTAGE, ®); + + return rc; +} + +int axp209_set_ldo2(int mvolt) +{ + int cfg = (mvolt - 1800) / 100; + int rc; + u8 reg; + + if (cfg < 0) + cfg = 0; + if (cfg > 15) + cfg = 15; + + rc = axp209_read(AXP209_LDO24_VOLTAGE, ®); + if (rc) + return rc; + + reg = (reg & 0x0f) | (cfg << 4); + rc = axp209_write(AXP209_LDO24_VOLTAGE, reg); + if (rc) + return rc; + + return 0; +} + +int axp209_set_ldo3(int mvolt) +{ + int cfg = (mvolt - 700) / 25; + + if (cfg < 0) + cfg = 0; + if (cfg > 127) + cfg = 127; + if (mvolt == -1) + cfg = 0x80; /* detemined by LDO3IN pin */ + + return axp209_write(AXP209_LDO3_VOLTAGE, cfg); +} + +int axp209_set_ldo4(int mvolt) +{ + int cfg, rc; + static const int vindex[] = { + 1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500, + 2700, 2800, 3000, 3100, 3200, 3300 + }; + u8 reg; + + /* Translate mvolt to register cfg value, requested <= selected */ + for (cfg = 15; vindex[cfg] > mvolt && cfg > 0; cfg--); + + rc = axp209_read(AXP209_LDO24_VOLTAGE, ®); + if (rc) + return rc; + + /* LDO4 configuration is in lower 4 bits */ + reg = (reg & 0xf0) | (cfg << 0); + rc = axp209_write(AXP209_LDO24_VOLTAGE, reg); + if (rc) + return rc; + + return 0; +} + +void axp209_poweroff(void) +{ + u8 val; + + if (axp209_read(AXP209_SHUTDOWN, &val) != 0) + return; + + val |= 1 << 7; + + if (axp209_write(AXP209_SHUTDOWN, val) != 0) + return; + + udelay(10000); /* wait for power to drain */ +} + +int axp209_init(void) +{ + u8 ver; + int rc; + + rc = axp209_read(AXP209_CHIP_VERSION, &ver); + if (rc) + return rc; + + /* Low 4 bits is chip version */ + ver &= 0x0f; + + if (ver != 0x1) + return -1; + + return 0; +} + +int axp209_poweron_by_dc(void) +{ + u8 v; + + if (axp209_read(AXP209_POWER_STATUS, &v)) + return 0; + return (v & AXP209_POWER_STATUS_ON_BY_DC); +} + +int axp209_power_button(void) +{ + u8 v; + + if (axp209_read(AXP209_IRQ_STATUS5, &v)) + return 0; + axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN); + return v & AXP209_IRQ5_PEK_DOWN; +} diff --git a/include/axp209.h b/include/axp209.h new file mode 100644 index 0000000..9edfa3f --- /dev/null +++ b/include/axp209.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2012 Henrik Nordstrom henrik@henriknordstrom.net + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +extern int axp209_set_dcdc2(int mvolt); +extern int axp209_set_dcdc3(int mvolt); +extern int axp209_set_ldo2(int mvolt); +extern int axp209_set_ldo3(int mvolt); +extern int axp209_set_ldo4(int mvolt); +extern void axp209_poweroff(void); +extern int axp209_init(void); +extern int axp209_poweron_by_dc(void); +extern int axp209_power_button(void); diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 2db083c..b76227e 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -170,6 +170,11 @@ #define CONFIG_SYS_I2C_SLAVE 0x7f #define CONFIG_CMD_I2C
+/* PMU */ +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER +#define CONFIG_SPL_POWER_SUPPORT +#endif + #ifndef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 1 /* UART0 */ #endif