Hello Joe, York,
Any comments on V2 series?
http://patchwork.ozlabs.org/project/uboot/list/?series=13261
Regards
Ashish
________________________________ From: Ashish Kumar Ashish.Kumar@nxp.com Sent: Monday, November 13, 2017 3:07 PM To: u-boot@lists.denx.de Cc: York Sun; joe.hershberger@ni.com; Ashish Kumar; Prabhakar Kushwaha Subject: [Patch v2 1/2] driver: net: ldpaa_eth: Add PHY-less SGMII support
In case of PHY-less mode, there is no interaction with PHY so auto-neg etc is not required and link will have fixed attributes
Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com Signed-off-by: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com --- v2: Add dependent patch set
drivers/net/ldpaa_eth/ldpaa_eth.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c index 21be79a..85e7faa 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.c +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c @@ -440,12 +440,17 @@ static int ldpaa_eth_open(struct eth_device *net_dev, bd_t *bd) bus = wriop_get_mdio(priv->dpmac_id); enet_if = wriop_get_enet_if(priv->dpmac_id); if ((bus == NULL) && - (enet_if == PHY_INTERFACE_MODE_XGMII)) { + ((enet_if == PHY_INTERFACE_MODE_XGMII) || + (enet_if == PHY_INTERFACE_MODE_SGMII))) { priv->phydev = (struct phy_device *) malloc(sizeof(struct phy_device)); memset(priv->phydev, 0, sizeof(struct phy_device));
- priv->phydev->speed = SPEED_10000; + if (enet_if == PHY_INTERFACE_MODE_XGMII) + priv->phydev->speed = SPEED_10000; + else + priv->phydev->speed = SPEED_1000; + priv->phydev->link = 1; priv->phydev->duplex = DUPLEX_FULL; } -- 2.7.4