Hi Christian,
On Tue, Oct 21, 2014 at 9:43 AM, Christian Gmeiner christian.gmeiner@gmail.com wrote:
Hi all.
Finally I got basic board support for OT1200 into upstream, but the last released version fails to detect SPI flash (read only ff's).
I can confirm that 2014.10 has a SPI probe issue on a mx6qsabresd as well:
U-Boot 2014.10 (Oct 21 2014 - 14:45:04)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: MX6-SabreSD I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Display: HDMI (1024x768) In: serial Out: serial Err: serial PMIC: PFUZE100 ID=0x10 Net: FEC [PRIME] Hit any key to stop autoboot: 0 => sf probe SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000 Failed to initialize SPI flash at 0:0 =>