[PATCH 08/11] arm: dts: add am62p5 dtbs from linux

Pull in the device tree source files for TI's am62p5 SoCs needed to boot the board from v6.6-rc5. These are an early release with only the peripherals to boot the board via UART boot

Signed-off-by: Bryan Brattlof bb@ti.com --- arch/arm/dts/k3-am62p-main.dtsi | 136 ++++++++++++++++++++++++++++++ arch/arm/dts/k3-am62p-mcu.dtsi | 15 ++++ arch/arm/dts/k3-am62p-wakeup.dtsi | 32 +++++++ arch/arm/dts/k3-am62p.dtsi | 122 +++++++++++++++++++++++++++ arch/arm/dts/k3-am62p5-sk.dts | 116 +++++++++++++++++++++++++ arch/arm/dts/k3-am62p5.dtsi | 107 +++++++++++++++++++++++ 6 files changed, 528 insertions(+) create mode 100644 arch/arm/dts/k3-am62p-main.dtsi create mode 100644 arch/arm/dts/k3-am62p-mcu.dtsi create mode 100644 arch/arm/dts/k3-am62p-wakeup.dtsi create mode 100644 arch/arm/dts/k3-am62p.dtsi create mode 100644 arch/arm/dts/k3-am62p5-sk.dts create mode 100644 arch/arm/dts/k3-am62p5.dtsi

diff --git a/arch/arm/dts/k3-am62p-main.dtsi b/arch/arm/dts/k3-am62p-main.dtsi new file mode 100644 index 0000000000000..c24ff905437ff --- /dev/null +++ b/arch/arm/dts/k3-am62p-main.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the AM62P main domain peripherals + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_main { + oc_sram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x70000000 0x10000>; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0xc0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + dmss: bus@48000000 { + bootph-all; + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; + + ti,sci-dev-id = <25>; + + secure_proxy_main: mailbox@4d000000 { + bootph-all; + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x4d000000 0x00 0x80000>, + <0x00 0x4a600000 0x00 0x80000>, + <0x00 0x4a400000 0x00 0x80000>; + interrupt-names = "rx_012"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dmsc: system-controller@44043000 { + bootph-all; + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + mbox-names = "rx", "tx"; + mboxes = <&secure_proxy_main 12>, + <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x00 0x44043000 0x00 0xfe0>; + + k3_pds: power-controller { + bootph-all; + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clock-controller { + bootph-all; + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + bootph-all; + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + main_pmx0: pinctrl@f4000 { + bootph-all; + compatible = "pinctrl-single"; + reg = <0x00 0xf4000 0x00 0x2ac>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_timer0: timer@2400000 { + bootph-all; + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 36 2>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 2>; + assigned-clock-parents = <&k3_clks 36 3>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + status = "disabled"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 152 0>; + clock-names = "fclk"; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/k3-am62p-mcu.dtsi b/arch/arm/dts/k3-am62p-mcu.dtsi new file mode 100644 index 0000000000000..27ca1c9c6d135 --- /dev/null +++ b/arch/arm/dts/k3-am62p-mcu.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the AM62P MCU domain peripherals + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_mcu { + mcu_pmx0: pinctrl@4084000 { + compatible = "pinctrl-single"; + reg = <0x00 0x04084000 0x00 0x88>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; +}; diff --git a/arch/arm/dts/k3-am62p-wakeup.dtsi b/arch/arm/dts/k3-am62p-wakeup.dtsi new file mode 100644 index 0000000000000..aaf4b793b58e7 --- /dev/null +++ b/arch/arm/dts/k3-am62p-wakeup.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the AM62P wakeup domain peripherals + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +&cbass_wakeup { + wkup_conf: bus@43000000 { + bootph-all; + compatible = "simple-bus"; + reg = <0x00 0x43000000 0x00 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + bootph-all; + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; + }; + + wkup_uart0: serial@2b300000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x2b300000 0x00 0x100>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "fclk"; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/k3-am62p.dtsi b/arch/arm/dts/k3-am62p.dtsi new file mode 100644 index 0000000000000..294ab73ec98b7 --- /dev/null +++ b/arch/arm/dts/k3-am62p.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM62P SoC Family + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-pinctrl.h" + +/ { + model = "Texas Instruments K3 AM62P5 SoC"; + compatible = "ti,am62p5"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@f0000 { + bootph-all; + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */ + <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ + <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ + <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ + <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ + <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ + <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */ + <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ + <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ + <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ + <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ + <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ + <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ + <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ + + /* MCU Domain Range */ + <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, + + /* Wakeup Domain Range */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; + + cbass_mcu: bus@4000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */ + <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ + <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ + <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */ + <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */ + }; + + cbass_wakeup: bus@b00000 { + bootph-all; + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ + <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */ + <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/ + <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ + }; + }; +}; + +/* Now include peripherals for each bus segment */ +#include "k3-am62p-main.dtsi" +#include "k3-am62p-mcu.dtsi" +#include "k3-am62p-wakeup.dtsi" diff --git a/arch/arm/dts/k3-am62p5-sk.dts b/arch/arm/dts/k3-am62p5-sk.dts new file mode 100644 index 0000000000000..6fb17b17c95e8 --- /dev/null +++ b/arch/arm/dts/k3-am62p5-sk.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the AM62P5-SK + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * + * Schematics: https://www.ti.com/lit/zip/sprr487 + */ + +/dts-v1/; + +#include "k3-am62p5.dtsi" + +/ { + compatible = "ti,am62p5-sk", "ti,am62p5"; + model = "Texas Instruments AM62P5 SK"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 8G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000001 0x80000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0x01e00000>; + no-map; + }; + }; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + AM62PX_IOPAD(0x1d0, PIN_INPUT, 0) /* (A23) UART0_CTSn */ + AM62PX_IOPAD(0x1d4, PIN_OUTPUT, 0) /* (C22) UART0_RTSn */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62PX_IOPAD(0x194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3 */ + AM62PX_IOPAD(0x198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2 */ + AM62PX_IOPAD(0x1ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR */ + AM62PX_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR */ + >; + }; +}; + +&main_uart0 { + bootph-all; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; + +&cbass_mcu { + bootph-all; +}; + +&mcu_pmx0 { + bootph-all; + wkup_uart0_pins_default: wkup-uart0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by DM firmware */ + bootph-all; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; +}; diff --git a/arch/arm/dts/k3-am62p5.dtsi b/arch/arm/dts/k3-am62p5.dtsi new file mode 100644 index 0000000000000..50147bb63e032 --- /dev/null +++ b/arch/arm/dts/k3-am62p5.dtsi @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the AM62P5 SoC family (quad core) + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + * + * TRM: https://www.ti.com/lit/pdf/spruj83 + */ + +/dts-v1/; + +#include "k3-am62p.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 135 0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 136 0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 137 0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 138 0>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; +};