On Friday, August 07, 2015 at 10:37:54 PM, Simon Glass wrote:
Hi Marek,
Hi Simon,
On 7 August 2015 at 14:35, Marek Vasut marex@denx.de wrote:
On Friday, August 07, 2015 at 09:13:45 PM, Simon Glass wrote:
Hi Marek,
Hi!
On 5 August 2015 at 19:49, Marek Vasut marex@denx.de wrote:
On Wednesday, August 05, 2015 at 04:39:33 PM, Simon Glass wrote:
Hi Marek,
Hi Simon,
[...]
It's up to you. Normally each bank has a name and the datasheet specifies it. In your case if not you could think about a naming scheme.
Can you please take a look into arch/arm/dts/socfpga.dtsi ? The system has three GPIO controllers (look for gpio0, gpio1, gpio2) and each of these controllers has one bank (porta, portb, portc) .
I can name my gpios portxN , where x is either of a,b,c and N is the GPIO number. The problem is, I cannot determine in dwapb_gpio_bind() which one is "porta", "portb" and "portc" because all I have is the physical addess of the GPIO controller and the index of the bank in the namespace of that controller.
Sure, I can do some sort of global counting in the driver, but I would like to avoid that sort of thing. I can also add some kind of ad-hoc DT prop, but that's also not a good idea I think. Do you have any suggestion for me please ?
One option is to use the device tree node name but it isn't very friendly - gpio0@xxxxx.
That's what I do now pretty much.
You could perhaps add a new property like 'bank-name'?
Do we want to add ad-hoc DT nodes which are a) Not describing hardware b) Not part of the official DT bindings for that platform ?
Is that really a way to go ?
[...]
It needs to be part of the official binding. Naming the hardware is part of the hardware definition - see for example the regulator-name property for regulators.
So what do you think about introducing a 'bank-name' property then ? I think this might work just fine ?
Another option is to use an alias:
aliases { gpio0 = &gpio_0; gpio1 = &gpio_1; gpio2 = &gpio_2; }
Then you can turn gpio0 into bank A, gpio1 into bank B, etc.
Is there a function which maps the udevice->dev->of_offset into an alias's seq ID ?
Best regards, Marek Vasut