From: Fabio Estevam festevam@denx.de
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export.
The ATF address is now passed via binman in imx8mp-u-boot.dtsi:
atf { description = "ARM Trusted Firmware"; type = "firmware"; arch = "arm64"; compression = "none"; load = <0x970000>; entry = <0x970000>;
atf_blob: atf-blob { filename = "bl31.bin"; type = "atf-bl31"; }; };
Remove the unneeded export ATF_LOAD_ADDR line.
Signed-off-by: Fabio Estevam festevam@denx.de --- doc/board/nxp/imx8mp_evk.rst | 1 - 1 file changed, 1 deletion(-)
diff --git a/doc/board/nxp/imx8mp_evk.rst b/doc/board/nxp/imx8mp_evk.rst index e7cc7b396b57..e106c3c71872 100644 --- a/doc/board/nxp/imx8mp_evk.rst +++ b/doc/board/nxp/imx8mp_evk.rst @@ -44,7 +44,6 @@ Build U-Boot $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_202006.bin ./build/ $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_202006.bin ./build/ $ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_202006.bin ./build/ - $ export ATF_LOAD_ADDR=0x970000 $ make O=build
Burn the flash.bin to the MicroSD card at offset 32KB: