On 7/28/23 14:40, Jonas Karlman wrote:
When dr_mode is peripheral or otg and U-Boot has not been built with DM_USB_GADGET support, booting such device may end up with:
dwc3_glue_bind_common: subnode name: usb@fcc00000 Error binding driver 'dwc3-generic-wrapper': -6 Some drivers failed to bind initcall sequence 00000000effbca08 failed at call 0000000000a217c8 (err=-6) ### ERROR ### Please RESET the board ###
Instead fail gracfully with ENODEV to allow board continue booting.
dwc3_glue_bind_common: subnode name: usb@fcc00000 dwc3_glue_bind_common: unsupported dr_mode 3
Also use CONFIG_IS_ENABLED(USB_HOST) and change switch to if statements to improve readability of the code.
Fixes: 446e3a205b87 ("dwc3-generic: Handle the PHYs, the clocks and the reset lines") Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Marek Vasut marex@denx.de