Hi Heiko,
Am 25.09.2015 um 13:17 schrieb Heiko Schocher hs@denx.de:
- add CONFIG_BOOT_RETRY_TIME to 30
- fex LED colors
- fix button pressed combination
- add
CONFIG_USB_HOST_ETHER CONFIG_USB_ETHER_ASIX CONFIG_USB_ETHER_MCS7830
- change U-Boot prompt to "U-Boot> "
Signed-off-by: Heiko Schocher hs@denx.de Signed-off-by: Matthias Michel matthias.michel@siemens.com
$ ./tools/buildman/buildman -b 20150923 at91 WARNING: no status info for 'dra72_evm' WARNING: no maintainers for 'dra72_evm' WARNING: no status info for 'am335x_gp_evm' WARNING: no maintainers for 'am335x_gp_evm' WARNING: no status info for 'hikey' WARNING: no maintainers for 'hikey' Building 5 commits for 61 boards (8 threads, 1 job per thread) Cloning repo for thread 0 Cloning repo for thread 1 Cloning repo for thread 2 Cloning repo for thread 3 Cloning repo for thread 4 Cloning repo for thread 5 Cloning repo for thread 6 Cloning repo for thread 7 305 0 0 /305 axm
board/siemens/smartweb/smartweb.c | 25 ++++++++++++++----------- include/configs/smartweb.h | 5 +++++ 2 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index 2d42488..d82f1b7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -90,7 +90,8 @@ static void smartweb_macb_hw_init(void) pin_to_mask(AT91_PIN_PA17) | pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) |
pin_to_mask(AT91_PIN_PA28),
pin_to_mask(AT91_PIN_PA28) |pin_to_mask(AT91_PIN_PA29), &pioa->pudr);at91_phy_reset();
@@ -101,7 +102,8 @@ static void smartweb_macb_hw_init(void) pin_to_mask(AT91_PIN_PA17) | pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) |
pin_to_mask(AT91_PIN_PA28),
pin_to_mask(AT91_PIN_PA28) |pin_to_mask(AT91_PIN_PA29), &pioa->puer);/* Initialize EMAC=MACB hardware */
@@ -141,13 +143,6 @@ int board_early_init_f(void)
int board_init(void) {
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- smartweb_nand_hw_init();
-#ifdef CONFIG_MACB
- smartweb_macb_hw_init();
-#endif /* power LED red */ at91_set_gpio_output(AT91_PIN_PC6, 0); at91_set_gpio_output(AT91_PIN_PC7, 1); @@ -163,6 +158,13 @@ int board_init(void) at91_udc_probe(&board_udc_data); #endif
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- smartweb_nand_hw_init();
+#ifdef CONFIG_MACB
- smartweb_macb_hw_init();
+#endif return 0; }
@@ -197,6 +199,7 @@ void matrix_init(void)
void spl_board_init(void) {
- /* power LED orange */ at91_set_gpio_output(AT91_PIN_PC6, 1); at91_set_gpio_output(AT91_PIN_PC7, 1); /* alarm LED orange */
@@ -212,8 +215,8 @@ void spl_board_init(void)
/* check if both button are pressed */ if (at91_get_gpio_value(AT91_PIN_PA28) == 0 &&
at91_get_gpio_value(AT91_PIN_PA29) == 0) {debug("Recovery button pressed\n");
at91_get_gpio_value(AT91_PIN_PA29) == 0) {smartweb_nand_hw_init(); nand_init(); spl_nand_erase_one(0, 0);diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d189c3f..fbb66d5 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -117,6 +117,9 @@
*/ #define CONFIG_MACB +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_RMII /* use reduced MII inteface */ #define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ #define CONFIG_AT91_WANTS_COMMON_PHY @@ -182,6 +185,8 @@ /* General Boot Parameter */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_BOOT_RETRY_TIME 30 +#define CONFIG_SYS_PROMPT "U-Boot> "
could you please use KConfig for at least the SYS_PROMPT setting?
Andreas
#define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \
2.1.0
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot