Re: [U-Boot-Users] Configuring Spansion flash

Yasothabalan Ramaswamy-TLS,Chennai wrote:

Thanks Ben.

I checked out in my board and found the part number to be:

S29GL128N90-R2. (128Mb)

OK. That's a good start. This is a very common flash type.

Regards, Yasotha Balan R

-----Original Message----- From: Ben Warren [mailto:bwarren@qstreams.com] Sent: Friday, September 14, 2007 7:54 PM To: Yasothabalan Ramaswamy-TLS,Chennai Cc: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] Configuring Spansion flash

Yasothabalan Ramaswamy-TLS,Chennai wrote:

...

Hi all,

I am using Lite5200B board with SPANSION type flash. UBoot code doesn't detect this flash.

I don't know anything about this board or processor, but there are people here who do. Please elaborate on what you mean by 'U-boot code doesn't detect this flash', and provide details on the steps you've taken to reach this conclusion.

Also, please don't top-post. Post responses directly after the relevant parts of e-mail messages. The previously-mentioned curmudgeons will eat your children if you continue this habit.

regards, Ben