Fix various misspellings of:
* deprecated * partition * preceding,preceded * preparation * its versus it's * export * existing * scenario * redundant * remaining * value * architecture
Signed-off-by: Robert P. J. Day rpjday@crashcourse.ca
---
just rebased against master so it should apply, tried to CC various relevant people depending on location of typos.
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 1864ab9..6b46078 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -45,7 +45,7 @@ static inline void *phys_to_virt(unsigned long x) /* * Virtual <-> DMA view memory address translations * Again, these are *only* valid on the kernel direct mapped RAM - * memory. Use of these is *depreciated*. + * memory. Use of these is *deprecated*. */ #define virt_to_bus(x) (__virt_to_bus((unsigned long)(x))) #define bus_to_virt(x) ((void *)(__bus_to_virt((unsigned long)(x)))) @@ -127,7 +127,7 @@ static inline void *phys_to_virt(unsigned long x) #endif
/* - * We should really eliminate virt_to_bus() here - it's depreciated. + * We should really eliminate virt_to_bus() here - it's deprecated. */ #define page_to_bus(page) (virt_to_bus(page_address(page)))
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 78a7fac..3a4e902 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -132,7 +132,7 @@ struct tag_ramdisk { /* describes where the compressed ramdisk image lives (virtual address) */ /* * this one accidentally used virtual addresses - as such, - * its depreciated. + * it's deprecated. */ #define ATAG_INITRD 0x54410005
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index ef08489..cabf64c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -489,7 +489,7 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR);
- puts("SPD data of all dimms (zero vaule is omitted)...\n"); + puts("SPD data of all dimms (zero value is omitted)...\n"); puts("Byte (hex) "); k = 1; for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { @@ -543,7 +543,7 @@ static void dump_spd_ddr_reg(void) } } printf("DDR registers dump for all controllers " - "(zero vaule is omitted)...\n"); + "(zero value is omitted)...\n"); puts("Offset (hex) "); for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF); diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index 48d207f..4a3d094 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -140,7 +140,7 @@ int board_mmc_init(bd_t *bis)
#ifdef CONFIG_SPL_OS_BOOT /* - * Do board specific preperation before SPL + * Do board specific preparation before SPL * Linux boot */ void spl_board_prepare_for_linux(void) diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 965252f..f785dbe 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis)
#ifdef CONFIG_SPL_OS_BOOT /* - * Do board specific preperation before SPL + * Do board specific preparation before SPL * Linux boot */ void spl_board_prepare_for_linux(void) diff --git a/cmd/nvedit.c b/cmd/nvedit.c index b67563b..9ca5cb5 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -15,7 +15,7 @@ * * The "environment" is stored on external storage as a list of '\0' * terminated "name=value" strings. The end of the list is marked by - * a double '\0'. The environment is preceeded by a 32 bit CRC over + * a double '\0'. The environment is preceded by a 32 bit CRC over * the data part and, in case of redundant environment, a byte of * flags. * @@ -838,7 +838,7 @@ static int do_env_delete(cmd_tbl_t *cmdtp, int flag, * With "-c" and size is NOT given, then the export command will * format the data as currently used for the persistent storage, * i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and - * prepend a valid CRC32 checksum and, in case of resundant + * prepend a valid CRC32 checksum and, in case of redundant * environment, a "current" redundancy flag. If size is given, this * value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32 * checksum and redundancy flag will be inserted. @@ -847,12 +847,12 @@ static int do_env_delete(cmd_tbl_t *cmdtp, int flag, * terminating '\0' byte) will be written; here the optional size * argument will be used to make sure not to overflow the user * provided buffer; the command will abort if the size is not - * sufficient. Any remainign space will be '\0' padded. + * sufficient. Any remaining space will be '\0' padded. * * On successful return, the variable "filesize" will be set. * Note that filesize includes the trailing/terminating '\0' byte(s). * - * Usage szenario: create a text snapshot/backup of the current settings: + * Usage scenario: create a text snapshot/backup of the current settings: * * => env export -t 100000 * => era ${backup_addr} +${filesize} @@ -970,7 +970,7 @@ sep_err: /* * env import [-d] [-t [-r] | -b | -c] addr [size] * -d: delete existing environment before importing; - * otherwise overwrite / append to existion definitions + * otherwise overwrite / append to existing definitions * -t: assume text format; either "size" must be given or the * text data must be '\0' terminated * -r: handle CRLF like LF, that means exported variables with diff --git a/common/board_f.c b/common/board_f.c index da381db..a93a4ba 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -1052,7 +1052,7 @@ void board_init_f(ulong boot_flags) { #ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA /* - * For some archtectures, global data is initialized and used before + * For some architectures, global data is initialized and used before * calling this function. The data should be preserved. For others, * CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack * here to host global data until relocation. @@ -1064,7 +1064,7 @@ void board_init_f(ulong boot_flags) /* * Clear global data before it is accessed at debug print * in initcall_run_list. Otherwise the debug print probably - * get the wrong vaule of gd->have_console. + * get the wrong value of gd->have_console. */ zero_global_data(); #endif diff --git a/common/env_common.c b/common/env_common.c index 560cad0..7fb62e8 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -226,7 +226,7 @@ int env_import(const char *buf, int check) return 0; }
-/* Emport the environment and generate CRC for it. */ +/* Export the environment and generate CRC for it. */ int env_export(env_t *env_out) { char *res; diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c index 5752fee..ba18135 100644 --- a/drivers/bios_emulator/x86emu/ops.c +++ b/drivers/bios_emulator/x86emu/ops.c @@ -41,7 +41,7 @@ * to the 256 byte-"opcodes" found on the 8086. The table which * dispatches this is found in the files optab.[ch]. * -* Each opcode proc has a comment preceeding it which gives it's table +* Each opcode proc has a comment preceding it which gives it's table * address. Several opcodes are missing (undefined) in the table. * * Each proc includes information for decoding (DECODE_PRINTF and diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index fd0c4f7..6125bbb 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -41,7 +41,7 @@ uint32_t secmem_set_cmd(uint32_t sec_mem_cmd) /*! * CAAM page allocation: * Allocates a partition from secure memory, with the id - * equal to partion_num. This will de-allocate the page + * equal to partition_num. This will de-allocate the page * if it is already allocated. The partition will have * full access permissions. The permissions are set before, * running a job descriptor. A memory page of secure RAM diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c index 80ef050..7e0749f 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training.c +++ b/drivers/ddr/marvell/a38x/ddr3_training.c @@ -1302,7 +1302,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, }
if (mem_mask != 0) { - /* motib redundent in KW28 */ + /* motib redundant in KW28 */ CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, CS_ENABLE_REG, 0, 0x8)); diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index b718481..ca11396 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -899,7 +899,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) * current transfer) have got the time to arrived before * netloop calls eth_halt */ - printf ("About preceeding transfer (eth%d):\n" + printf ("About preceding transfer (eth%d):\n" "- Sent packet number %d\n" "- Received packet number %d\n" "- Handled packet number %d\n", diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c index c8dcb27..f213587 100644 --- a/drivers/spi/fsl_dspi.c +++ b/drivers/spi/fsl_dspi.c @@ -594,7 +594,7 @@ static int fsl_dspi_claim_bus(struct udevice *dev)
priv = dev_get_priv(bus);
- /* processor special prepartion work */ + /* processor special preparation work */ cpu_dspi_claim_bus(bus->seq, slave_plat->cs);
/* configure transfer mode */ diff --git a/include/environment.h b/include/environment.h index 1fdbdad..b602e8a 100644 --- a/include/environment.h +++ b/include/environment.h @@ -16,10 +16,9 @@ * shifts the remaining entries to the front. Replacing an entry is a * combination of deleting the old value and adding the new one. * - * The environment is preceeded by a 32 bit CRC over the data part. + * The environment is preceded by a 32 bit CRC over the data part. * - ************************************************************************** - */ + *************************************************************************/
#if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR diff --git a/include/s_record.h b/include/s_record.h index 6db7174..81245ba 100644 --- a/include/s_record.h +++ b/include/s_record.h @@ -29,7 +29,7 @@ * 2 data record with 24-bit address * 3 data record with 32-bit address * 4 symbol record (LSI extension) - * 5 number of data records in preceeding block + * 5 number of data records in preceding block * 6 unused * 7 ending record for S3 records * 8 ending record for S2 records diff --git a/lib/hashtable.c b/lib/hashtable.c index 4e52b36..afd2305 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -499,7 +499,7 @@ int hdelete_r(const char *key, struct hsearch_data *htab, int flag) * * If the separator character is different from NUL, then any * separator characters and backslash characters in the values will - * be escaped by a preceeding backslash in output. This is needed for + * be escaped by a preceding backslash in output. This is needed for * example to enable multi-line values, especially when the output * shall later be parsed (for example, for re-import). * diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 24831b3..84f5756 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -4263,7 +4263,7 @@ sub process { } }
-# check for case / default statements not preceeded by break/fallthrough/switch +# check for case / default statements not preceded by break/fallthrough/switch if ($line =~ /^.\s*(?:case\s+(?:$Ident|$Constant)\s*|default):/) { my $has_break = 0; my $has_statement = 0; @@ -4284,7 +4284,7 @@ sub process { } if (!$has_break && $has_statement) { WARN("MISSING_BREAK", - "Possible switch case/default not preceeded by break or fallthrough comment\n" . $herecurr); + "Possible switch case/default not preceded by break or fallthrough comment\n" . $herecurr); } }
diff --git a/tools/fdtgrep.c b/tools/fdtgrep.c index 8d3fef4..b907827 100644 --- a/tools/fdtgrep.c +++ b/tools/fdtgrep.c @@ -405,7 +405,7 @@ static int display_fdt_by_regions(struct display_info *disp, const void *blob, * The output of this function may or may not be a valid FDT. To ensure it * is, these disp->flags must be set: * - * FDT_REG_SUPERNODES: ensures that subnodes are preceeded by their + * FDT_REG_SUPERNODES: ensures that subnodes are preceded by their * parents. Without this option, fragments of subnode data may be * output without the supernodes above them. This is useful for * hashing but cannot produce a valid FDT.